Load Estimation of Offshore Wind Turbines

Sang Lee, Matthew Churchfield, Frederick Driscoll, Senu Sirnivas, Jason Jonkman, Patrick Moriarty, Bjόrn Skaare, Finn Gunnar Nielsen and Erik Byklum
Additional contact information
Sang Lee: Department of Mechanical Engineering, University of New Mexico, Albuquerque, NM 87131, USA
Matthew Churchfield: National Renewable Energy Laboratory, Golden, CO 80401, USA
Frederick Driscoll: National Renewable Energy Laboratory, Golden, CO 80401, USA
Senu Sirnivas: National Renewable Energy Laboratory, Golden, CO 80401, USA
Jason Jonkman: National Renewable Energy Laboratory, Golden, CO 80401, USA
Patrick Moriarty: National Renewable Energy Laboratory, Golden, CO 80401, USA
Bjόrn Skaare: Statoil, 4035 Stavanger, Norway
Finn Gunnar Nielsen: Geophysical Institute, University of Bergen, 7803 Bergen, Norway
Erik Byklum: Statoil, 4035 Stavanger, Norway

Energies, 2018, vol. 11, issue 7, 1-15

Abstract: The influence of 3 MW Hywind-II wind turbine wakes from an upstream offshore floating wind turbine on a downstream turbine with a separation distance of seven rotor diameters was studied for a site in the Gulf of Maine. The turbines and the platforms were subjected to atmospheric boundary layer flows. Various sensitivity studies on fatigue loads with respect to the positions of the downstream turbine were performed and validated with a large-eddy simulation tool. In particular, the effect of various lateral positions of the downstream turbine relative to the upstream turbine were considered using time-series turbine wake data generated from the large-eddy simulation tool which served as an input to an aero-elastic wind turbine model to assess the loads. The load response from the rotor, tower, and the floating platform for the downstream turbine were sensitive to the lateral offset positions where turbines that were partially exposed to upstream turbine wakes yielded significant increases in the cyclic load range. For the given set of lateral positions for the downstream turbine, the largest damage equivalent load occurred when the turbine was one rotor diameter to the left of the centerline, when looking upstream, which is the position of the turbine fully exposed to upstream turbine wake. On the other hand, the fatigue load on the downstream turbine placed on the right side of the position fully exposed to the upstream turbine wake, yielded lower stress due to the non-symmetric shape of the turbine wake. The configuration associated with the largest damage equivalent loads was further investigated in a large-eddy simulation, modeling both the upstream and downstream turbines. It was found that the energy spectra at the blade rotational frequency were a magnitude order higher for the downstream turbine, especially for surge, heave, pitch, and yaw motion of the platform. The increase of the damage equivalent load for the flapwise blade root moment was 45% compared to the upstream turbine, which can potentially reduce the turbine service life time.

Keywords: atmospheric boundary layer; wind turbines; damage equivalent load (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
https://www.mdpi.com/1996-1073/11/7/1895/pdf (application/pdf)
https://www.mdpi.com/1996-1073/11/7/1895/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:11:y:2018:i:7:p:1895-:d:159040

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().