Paper Mill Sludge as a Source of Sugars for Use in the Production of Bioethanol and Isoprene

Shona M. Duncan, Malek Alkasrawi, Raghu Gurram, Fares Almomani, Amy E Wiberley-Bradford and Eric Singsaas
Additional contact information
Shona M. Duncan: Wisconsin Institute for Sustainable Technology, University of Wisconsin–Stevens Point, Stevens Point, WI 54481, USA
Malek Alkasrawi: Wisconsin Institute for Sustainable Technology, University of Wisconsin–Stevens Point, Stevens Point, WI 54481, USA
Raghu Gurram: Wisconsin Institute for Sustainable Technology, University of Wisconsin–Stevens Point, Stevens Point, WI 54481, USA
Fares Almomani: Department of Chemical Engineering, Qatar University, P.O. Box 2713 Doha, Qatar
Amy E Wiberley-Bradford: Department of Horticulture, University of Wisconsin-Madison, 1575 Linden Dr, Madison, WI 53706, USA
Eric Singsaas: Natural Resources Research Institute, University of Minnesota Duluth, Duluth, MN 55812, USA

Energies, 2020, vol. 13, issue 18, 1-12

Abstract: Paper mill sludge (PMS) solids are predominantly comprised of cellulosic fibers and fillers rejected during the pulping or paper making process. Most sludges are dewatered and discharged into landfills or land spread at a cost to the mill; creating large economic and environmental burdens. This lignocellulosic residual stream can be used as a source of sugars for microbial fermentation to renewable chemicals. The aim of this study was to determine the possibility of converting mill sludge to sugars and then fermentation to either isoprene or ethanol. Chemical analysis indicated that the cellulosic fiber composition between 28 to 68% and hemicellulose content ranged from 8.4 to 10.7%. Calcium carbonate concentration in the sludge ranged from 0.4 to 34%. Sludge samples were enzyme hydrolyzed to convert cellulose fibers to glucose, percent conversion ranged from 10.5 to 98%. Calcium carbonate present with the sludge resulted in low hydrolysis rates; washing of sludge with hydrochloric acid to neutralize the calcium carbonate, increased hydrolysis rates by 50 to 88%. The production of isoprene “very low” (190 to 470 nmol) because the isoprene yields were little. Using an industrial yeast strain for fermentation of the sludge sugars obtained from all sludge samples, the maximum conversion efficiency was achieved with productivity ranging from 0.18 to 1.64 g L −1 h −1 . Our data demonstrates that PMS can be converted into sugars that can be fermented to renewable chemicals for industry.

Keywords: sludge; hydrolysis; sugars; biofuels; calcium carbonate; lignocellulosic biomass (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2020
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
https://www.mdpi.com/1996-1073/13/18/4662/pdf (application/pdf)
https://www.mdpi.com/1996-1073/13/18/4662/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:13:y:2020:i:18:p:4662-:d:410329

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().