The Effect of Microencapsulated PCM Slurry Coolant on the Efficiency of a Shell and Tube Heat Exchanger

Marcin Kruzel, Tadeusz Bohdal, Krzysztof Dutkowski and Mykola Radchenko
Additional contact information
Marcin Kruzel: Department of Power Engineering, Faculty of Mechanical Engineering, Koszalin University of Technology, Sniadeckich Street 2, 75-453 Koszalin, Poland
Tadeusz Bohdal: Department of Power Engineering, Faculty of Mechanical Engineering, Koszalin University of Technology, Sniadeckich Street 2, 75-453 Koszalin, Poland
Krzysztof Dutkowski: Department of Power Engineering, Faculty of Mechanical Engineering, Koszalin University of Technology, Sniadeckich Street 2, 75-453 Koszalin, Poland
Mykola Radchenko: Department of Conditioning and Refrigerating, Admiral Makarov National University of Shipbuilding, Heroes of Ukraine Avenue 9, 54025 Mykolayiv, Ukraine

Energies, 2022, vol. 15, issue 14, 1-11

Abstract: This paper describes the results of experimental studies on heat transfer in a shell and tube heat exchanger during the phase changes of the HFE 7000 refrigerant. The studies were performed using a mixture of water and a microencapsulated phase change material as a coolant. HFE 7000 refrigerant condenses on the external surface of the copper tube, while a mixture of water and phase change materials flows through the channels as coolant. Currently, there is a lack of research describing cooling using phase change materials in heat exchangers. There are a number of publications describing the heat exchange in heat exchangers during phase changes under air or water cooling. Therefore, the research hypothesis was adopted that the use of mixed water and microencapsulated material as a heat transfer fluid would increase the heat capacity and contribute to the enhancement of the heat exchange in the heat exchanger. This will enable an increase in the total heat transfer coefficient and the heat efficiency of the exchanger. Experimental studies describe the process of heat transfer intensification in the above conditions by using the phase transformation of the cooling medium melting. The test results were compared with the results of an experiment in which pure water was used as the reference liquid. The research was carried out in a wide range of refrigerant and coolant parameters: ṁ r = 0.0014–0.0015 kg·s −1 , ṁ c = 0.014–0.016 kg·s −1 , refrigerant saturation temperature Ts = 55–60 °C, coolant temperature at the inlet Tc in = 20–32 °C, and heat flux density q = 7000–7450 W·m −1 . The obtained results confirmed the research hypothesis. There was an average of a 13% increase in the coolant heat transfer coefficient, and the peak increase in αc was over 24%. The average value of the heat transfer coefficient k increased by 5%, and the highest increases in the value of k were noted at T in = 27 °C and amounted to 9% in relation to the reference liquid.

Keywords: heat exchanger; microencapsulation; phase change materials; refrigerant; heat transfer coefficient (search for similar items in EconPapers)
JEL-codes: Q Q0 Q4 Q40 Q41 Q42 Q43 Q47 Q48 Q49 (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (6)

Downloads: (external link)
https://www.mdpi.com/1996-1073/15/14/5142/pdf (application/pdf)
https://www.mdpi.com/1996-1073/15/14/5142/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jeners:v:15:y:2022:i:14:p:5142-:d:863584

Access Statistics for this article

Energies is currently edited by Ms. Agatha Cao

More articles in Energies from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().