Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash

C.R. Cheeseman and G.S. Virdi

Resources, Conservation & Recycling, 2005, vol. 45, issue 1, 18-30

Abstract: The properties of lightweight aggregate (LWA) manufactured from the ash produced by fluidised bed incineration of sewage sludge have been investigated. The ash was mixed with a clay binder, formed into approximately spherical pellets and rapidly sintered in a rotary tube furnace at temperatures between 1020 and 1080°C. Selected physical properties of sintered ash pellets relevant to use as lightweight aggregate have been determined, including density (apparent specific gravity), water absorption and compressive (crushing) strength. These have been compared to the properties of a commercially available lightweight aggregate (Lytag). Sewage sludge ash (SSA) pellets sintered over a range of temperatures were found to have lower densities than Lytag and low water absorption when fired between approximately 1050 and 1080°C. Individual pellet strengths were comparable to Lytag. Major crystalline phases present in both as-received and sintered sewage sludge ash were quartz (SiO2), the calcium magnesium phosphate mineral whitlockite (Ca7Mg2P6O24) and hematite (Fe2O3). Manufacturing lightweight aggregate from sewage sludge ash may become increasingly viable as landfill disposal costs continue to increase and the costs of alternative natural aggregates obtained from increasingly distant locations also increase. Sewage sludge incinerators tend to be situated in urban areas, close to where construction activity is occurring. The results indicate the potential for manufacturing high quality lightweight aggregate from the sterile, inert ash produced by sewage sludge incineration, using relatively simple processing and low temperature sintering.

Keywords: Lightweight aggregate; Sewage sludge ash; Sintering; Waste reuse; Incineration (search for similar items in EconPapers)
Date: 2005
References: View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0921344905000078
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:recore:v:45:y:2005:i:1:p:18-30

DOI: 10.1016/j.resconrec.2004.12.006

Access Statistics for this article

Resources, Conservation & Recycling is currently edited by Ming Xu

More articles in Resources, Conservation & Recycling from Elsevier
Bibliographic data for series maintained by Kai Meng ().