Efficiency of Waste as Cement Replacement in Foamed Concrete—A Review

Rokiah Othman (), Ramadhansyah Putra Jaya (), Youventharan Duraisamy, Mohd Arif Sulaiman, Beng Wei Chong and Ali Ghamari
Additional contact information
Rokiah Othman: Faculty of Civil Engineering Technology, Universiti Malaysia Pahang, Kuantan 26300, Pahang, Malaysia
Ramadhansyah Putra Jaya: Faculty of Civil Engineering Technology, Universiti Malaysia Pahang, Kuantan 26300, Pahang, Malaysia
Youventharan Duraisamy: Faculty of Civil Engineering Technology, Universiti Malaysia Pahang, Kuantan 26300, Pahang, Malaysia
Mohd Arif Sulaiman: Faculty of Civil Engineering Technology, Universiti Malaysia Pahang, Kuantan 26300, Pahang, Malaysia
Beng Wei Chong: Ingram School of Engineering, Texas State University, San Marcos, TX 78666, USA
Ali Ghamari: Department of Civil Engineering, Ilam Branch, Islamic Azad University, Ilam 1477893855, Iran

Sustainability, 2023, vol. 15, issue 6, 1-18

Abstract: Foamed concrete is a lightweight construction material that has gained popularity due to its excellent thermal and acoustic insulation properties. Foamed concrete production involves using cement as a binding agent, which results in a high carbon footprint. In response to sustainable development goals (SDG), there has been a growing interest in exploring alternative materials that can replace cement to improve energy efficiency, climate change, resource efficiency, and overall improvement of foamed concrete properties. Several tons of waste generated annually from industry, agriculture, and quarries are dumped into landfills and cause environmental impacts. Nevertheless, the efficiency of this waste presents an interesting question and there is limited knowledge of its use in foamed concrete. Hence, a review study is needed to evaluate the efficiency of different waste materials that could be used to replace cement in foamed concrete production. The objective of this research is to summarize the efficiency of industrial waste (IW) as a pozzolan alternative (PA) for cement replacement in foamed concrete (FC) production. This study aims to evaluate the chemical, physical, and pozzolanic reactions of selected IW and compare them to cement and selected pozzolans to determine the effect of efficient IW on the compressive strength and durability of FC. This research evaluated the efficiency of IW in PA by characterizing their chemical, physical, and pozzolanic reactions. The selected IW was studied and compared to cement and selected pozzolans using XRF and XRD analyses. This study also performed the Frattini test to determine the strength activity index (SAI) of efficient IW. The efficiency of IW in PA was evaluated by comparing the SAI of efficient IW to the minimum 75% required by BS3892. The compressive strength and durability of FC with efficient IW were determined by evaluating the microstructure of the hardened paste of FC using capillary void analysis. The study found that efficient IW, which was classified as siliceous pozzolan type F (ASTMC618-SAF > 70%), rich in amorphous silica and a high Blaine specific area, can replace cement in FC production. The XRF and XRD results showed that the most crystalline components obtained in the IW are SiO 2 , Al 2 O 3 , CaCO 3 , and Fe 2 O 3 . The efficient IW produced more calcium silicate hydrate (CSH) and denser FC, making it stronger, with fewer voids and higher resistance to water absorption. The Frattini test showed that the SAI of efficient IW is greater than the minimum 75% required by BS3892. Incorporating efficient IW as cement replacement in FC produced higher compressive strength and improved the durability of FC. The novelty of this research is in the evaluation of efficient IW as a replacement material for cement in FC production. This study shows that efficient IW can promote the use of waste materials, reduce CO 2 emissions, conserve energy and resources, and improve the properties of FC. This study’s findings can be used by construction industry players to support sustainable development goals by reducing the use of cement and promoting the use of waste materials as a replacement material for cement.

Keywords: efficiency; industrials waste; cement replacement; foamed concrete (search for similar items in EconPapers)
JEL-codes: O13 Q Q0 Q2 Q3 Q5 Q56 (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
https://www.mdpi.com/2071-1050/15/6/5163/pdf (application/pdf)
https://www.mdpi.com/2071-1050/15/6/5163/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jsusta:v:15:y:2023:i:6:p:5163-:d:1097305

Access Statistics for this article

Sustainability is currently edited by Ms. Alexandra Wu

More articles in Sustainability from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().