Journal of Advances in Technology and Engineering Research

2015 - 2020

Current editor(s): A/Professor Akbar A. Khatibi

From A/Professor Akbar A. Khatibi
Calle Alarcon 66, Sant Adrian De Besos 08930, Barcelona Spain.
Bibliographic data for series maintained by A/Professor Akbar A. Khatibi ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 3, issue 6, 2017

Experimental and finite element analysis of vibrations of a rotating annular plates pp. 224-234

M. Tufekci, O. E. Genel and O. Oldac

Vehicle types classification using deep neural network techniques pp. 235-243

Jian-Da Wu, Yi-Cheng Luo and Hsien-Yu Lin

The feasibility study on trapping experiments with lights in Barito river of Indonesia pp. 244-253

Ahmadi

Development and implementation of a sit-to-stand motion algorithm for humanoid robots pp. 254-265

Fatma Gongor, Onder Tutsoy and Sule Colak

Volume 3, issue 5, 2017

Influence of pyrogallol on the catalytic effects of Fe3+ during Fe2+ oxidation with atmospheric oxygen pp. 170-175

S. O. Celik, S. Günes Durak, T. Ormanci Acar, G. Türkoglu Demirkol, Ö. Mutlu Salmanli and N. Tüfekci

Removal rate of compacted clay soil in the batch and continuous reactors and its permeability pp. 176-183

G. Turkoglu Demirkol, M. S. Ozcoban and N. Tufekci

Evaluation of clay soils’ permeability: A comparative study between the natural, compacted, and consolidated clay soils pp. 184-191

Mehmet Sükrü Özçoban, Sevgi Günes Durak, Türkan Ormanci Acar, Güler Türkoglu Demirkol, Suna Özden Çelik and Nese Tüfekci

The failure of delayed detached eddy simulation for flow control over a hump using synthetic jet actuator pp. 192-210

Mohamed A. Mohamed and Qin Ning

Evaluation of low cost radiant cooling panel in a test room with passively cooled water pp. 211-223

Muhammad Syukri Imran, Azhaili Baharun, Siti HalipahIbrahim and Wan Azlan Wan Zainal Abidin

Volume 3, issue 4, 2017

Analysis of real-time data with spark streaming pp. 108-116

Nikitha Johnsirani Venkatesan, Choon Sung Nam, Earl Kim and Dong Ryeol Shin

Mining student at risk in higher education using predictive models pp. 117-132

January D. Febro and Jocelyn Barbosa

The effects of inlet airflow angle on the quality of mixing air distribution in an aircraft cabin mock-up pp. 133-143

Mahmoud Mohamed Attalla, Mohamed Abdelfadiel Mohamed and Sabry Mohamed Iraqi

Sequence behavior of vortical development and evolution of a low-speed rectangular jet pp. 144-149

Yung-Lan Yeh and Chih-Huang Chiang

In search of missing design rules: Using rule induction to extend existing rule bases pp. 150-169

Julian R. Eichhoff, Felix W. Baumann and Dieter Roller

Volume 3, issue 3, 2017

Effect of steam curing condition on the strength gain of mortar containing calcium nitrite based accelerator admixture pp. 63-68

Abdul Ahmad Malikyar, Yuhji Sudoh, Nozomi Nakajima and Shigeyuki Date

Sport utility vehicle seat structure simulation of frontal oblique crash pp. 69-78

Sutartip Wittayapiyanon and Sathaporn Chuepeng

An artificial immune network based novel approach to predict short term load forecasting pp. 79-88

Arpita Samanta Santra, Cheng-Chin Taso and Pei-Chann Chang

Transient analysis due to short circuit faults in wind hybrid systems pp. 89-100

Farhana Umer and Nurettin Cetinkaya

Fragility assessment of the connection used in small-scale residential steel house subjected to lateral wind loads pp. 101-107

WooYoung Jung, Viriyavudh Sim and Jungkyu Choi

Volume 3, issue 2, 2017

Low amplitude pulse electric field for elimination of unpleasant sensation associated with high amplitude electric field for electrochemotherapy pp. 27-33

Hassan Buhari Mamman, Muhammad Mahadi Abdul Jamil and Mohamad Nazib Adon

Surface roughness modeling of semi solid aluminum milling by fuzzy logic pp. 34-46

Savkovic B., Kovac P., Mankova I., Gostimirovic M., Rokosz K. and Rodic D.

A comprehensive comparison and classification of routing attacks in wireless sensor networks pp. 47-56

Ahmed A. Mohsin

Survey of designing user interface for mobile applications pp. 57-62

Sarah Hamed Al Ahmadi

Volume 3, issue 1, 2017

PAPR reduction in OFDM system with Wavelet transformation and partial transmit sequence technique pp. 01-05

Nurina Febryanti and Dadang Gunawan

Automated age estimation based on geometric mean projection transform using Orthopantomographs pp. 06-10

Seyed Mostafa Mousavi Kahaki, Waidah Ismail, Md Jan Nordin, Nazatul S. Ahmad and Marina Ahmad

Flash codes with multibit update for asymmetrical write memory device pp. 11-18

Kenneth Ivanson D. Laurel and Proceso L. Fernandez

Survey the composition and distribution of fungi species in the natural reserve Wetland Lung Ngoc Hoang, Vietnam pp. 19-26

Duong Minh Truyen and Frederick F. Patacsil

Volume 2, issue 6, 2016

Effective management of handover process in mobile communication network pp. 176-182

O. A Osahenvemwen and O. F Odiase

Application of lean technique for outpatient service time improvement in public hospital of Thailand pp. 183-188

Chanawee Aueprasert and Wuthichai Wongthatsanekorn

Mixed convective nanofluids over vertical channel having forward-facing step flow having a baffle pp. 189-195

Omar. A. Hussain and Thamer Khalif Salem

Automatic detection of breast cancer in mammogram images pp. 196-201

Faozia Ali S. Alsarori and Reza Hassanpour

Design and development of an information technology fundamentals multimedia courseware for dynamic learning environment pp. 202-210

Christine Lourrine S. Tablatin, Frederick F. Patacsil and Paulo V. Cenas

Volume 2, issue 5, 2016

A study on formation of saltwater-freshwater interface and upconing in coastal aquifers based on experiments with hydraulic models pp. 134-139

Byoung Ryoun Koh, Young Hun Oh and Dong Il Park

Over-speeding warning system using wireless communications for road signs and vehicles pp. 140-155

Aaron Sharpe, Byoung Ryoun Koh and Simon McLernon

Batch size for training convolutional neural networks for sentence classification pp. 156-163

Nabeel Zuhair Tawfeeq Abdulnabi and Oguz Altun

Analysis of interference of unmanned aircraft system (UAS) and fixed service at frequency band 12.5-12.75 GHz by considering the factor of rain attenuation pp. 164-169

Muhamad Suharso Nugroho and Muhammad Suryanegara

Precise three-dimensional segmentation for breast region on magnetic resonance imaging pp. 170-175

Tzu-Yu Liu, Yu-Len Huang and Dar-Ren Chen

Volume 2, issue 4, 2016

Effect on mechanical properties of rice Husk/E-Glass polypropylene hybrid composites using sodium hydroxide (NaOH) pp. 105-111

Kannan Rassiah, M. M. H Megat Ahmad and Aidy Ali

A study of the relationship between adverse weather conditions and flight delay pp. 112-117

Y. X. Lee and Z. W. Zhong

Application of soft computing technique in the modelling and prediction of gold and silver rates pp. 118-124

M. Dhiyanji and K. Sundaravadivu

Effects of different plant growth hormones on in vitro regeneration of a new Malaysian rice variety (Oryza Sativa L. Var. Mria 1) from stem explants pp. 125-133

Nor Yasmin M. F., Norrizah J. S. and Azani S.

Volume 2, issue 3, 2016

Assessment of flexible pavement of selected highways in Odo-Otin Local Government South-Western Nigeria pp. 66-80

A. A. Bello, O. S. Awogboro and O. A. Ajamagbiso

Numerical simulation on flow and heat transfer characteristics of supercritical fluids in mini-channels pp. 81-86

A. N. Oumer, N. T. Rao, F. Basraw and H. Ibrahim

Finding your car in the car park; Only use a smartphone pp. 87-99

Zhao Liu, Weiwei Chen and Zhigang Li

Theoretical and experimental researches on development of new construction of wind-driven generator with flux concentrator pp. 100-104

Koshumbayev Marat, Yerzhan Assem, Myrzakulov Bakhytzhan and Kvasov Peter

Volume 2, issue 2, 2016

Document overlapping clustering using formal concept analysis pp. 28-34

Yi-Hui Chen, Eric Jui-Lin Lu, Yu-Ting Lin and Ya-Wen Cheng

Comparison of electrocoagulation using iron and aluminium electrodes for biogas production wastewater treatment pp. 35-40

Pongsakorn Truttim and Prapa Sohsalam

Study of the measurement and stability estimation of concrete roadbed slab at high-speed train in bridgeearthwork transition zone pp. 41-51

Taekyun Kim, Byeongjin Choi, Jongho Park, Sungnam Hong and Sun-Kyu Park

ISO 50001 based integrated energy management system and organization performance pp. 52-65

Mustafa Yüce and Muhsin Halis

A preliminary study on forming limit diagram and strain distribution of ASS 304 pp. 52-58

A. Anitha Lakshmi, Ch. Srinivasa Rao, J. Gangadhar and Swadesh Kumar Singh

Volume 2, issue 1, 2016

Numerical analysis and optimum design for the vacuum jacket valve pp. 01-05

Rock-Won Jeon, Si-Pom Kim and Jae-Hoon Lee

Optimal design for adiabatic pipes using vacuum at cryogenic temperatures pp. 06-11

Jae-Hoon Lee, Si-Pom Kim and Rock-Won Jeon

A new method of winner determination for economic resource allocation in cloud computing systems pp. 12-17

Ebrahim Behrouzian Nejad and Rezvan Ali Poorsabzevari

Development of the system form for concrete casting in the girder bridge slab-purlin hanging system pp. 18-21

Soojin Sung, Jeeyoung Lim, Shraddha Palikhe, Kyungbo Han and Sunkuk Kim

Four cases of production-installation simulation for free-form concrete panels pp. 22-27

Jeeyoung Lim, Liu Yue, Youngju Na and Sunkuk Kim