Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates

Haifeng Liu, Shanju Li, Zunqing Zheng, Jia Xu and Mingfa Yao

Applied Energy, 2013, vol. 112, issue C, 246-256

Abstract: The effects of fuel properties and oxygenated structures on the combustion and emissions were investigated on a diesel engine. Five different fuels, n-heptane, iso-octane, n-butanol, 2-butanol and methyl octynoate, were added into diesel fuel with the same blending ratio (20% v/v), referred to as n-heptane20, iso-octane20, n-butanol20, 2-butanol20 and methyloctynoate20, respectively. A wide range of exhaust gas recirculation (EGR) rates from 0% to 62% were used to cover both the conventional diesel combustion and the low temperature combustion. Results demonstrate that there is little difference in combustion characteristics between n-heptane20 and the diesel fuel over a wide range of EGR rates. The ignition delay of iso-octane20 is retarded compared to that of n-heptane20 and the difference in ignition delay between iso-octane20 and n-heptane20 becomes larger with the increase of EGR rate. The combustion characteristics of n-butanol20 are similar to those of iso-octane20. The oxygen in n-butanol20 is the main factor for soot reduction in comparison with the diesel fuel. The secondary factor for soot reduction is the improvement in fuel mixing process due to the longer ignition delay caused by lower cetane number of n-butanol. Other changes in physical and chemical properties of n-butanol20 have very limited effect on soot reduction. Compared to methyloctynoate20, additional 12.6% reduction in the total soot emissions can be achieved by fueling n-butanol20 with the addition of 2-ethylhexyl nitrate (EHN), which can be attributed to the different molecular structures of the oxygenated fuels. The difference in locations of OH radical between n-butanol and 2-butanol has very small effect on soot emissions. The soot-reduction efficiency caused by fuel properties and oxygenated structures varies as the EGR rate changes. Fuel properties have little effects on NOx, CO, THC emissions and gross indicated thermal efficiency (ITE) under similar EGR conditions, while the EGR rates play a dominant role on the gaseous emissions and ITE.

Keywords: Fuel properties; Oxygenated structures; Soot emissions; Butanol; Methyl octynoate (search for similar items in EconPapers)
Date: 2013
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (32)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261913005308
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:112:y:2013:i:c:p:246-256

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2013.06.023

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().