Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES)

Weilong Wang, Shaopeng Guo, Hailong Li, Jinyue Yan, Jun Zhao, Xun Li and Jing Ding

Applied Energy, 2014, vol. 119, issue C, 189 pages

Abstract: A mobilized thermal energy storage (TES) system has been proposed to recover and use industrial waste or excess heat for distributed users. In this paper, lab-scale test facilities have been built to understand the mechanisms of heat charging and discharging processes. The facilities consist of a direct/indirect-contact thermal energy storage container, heat transfer oil (HTO)/water tanks, an electrical boiler, HTO/water pumps and a plate heat exchanger. The organic phase change material (PCM), erythritol, which is sugar alcohol, was chosen as the working material due to its large heat density (330kJ/kg) and suitable melting point (118°C) for industrial low-temperature heat recovery, as well as non toxic and corrosive. Although differential scanning calorimetry tests have shown that a large temperature range exists during the phase change of erythritol, it did not affect the heat discharging during the tests of system performance. Heat charging/discharging results show that for the direct-contact storage container, heat discharging process is much faster than charging process. At the initial stage of heat charging, heat transfer oil is blocked to enter the container, resulting in a slow charging rate. Meanwhile, the PCM attached on the container wall on the bottom always melts last. It has been found that increasing the flow rate of HTO can effectively enhance the charging/discharging processes. For the indirect-contact storage container, heat charging and discharging take almost the same time; and the flow rate of HTO does not show an obvious effect on the charging and discharging processes due to the weak thermal conductivity of the solid phase change material. Comparatively, using the direct-contact storage container may achieve shorter charging/discharging processes than using the indirect-contact storage container.

Keywords: Direct-contact; Indirect-contact; Mobilized thermal energy storage system; Phase change; Industrial waste recovery (search for similar items in EconPapers)
Date: 2014
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (39)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261913010672
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:119:y:2014:i:c:p:181-189

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2013.12.058

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().