Application of optimal design methodologies in retrofitting natural gas combined cycle power plants with CO2 capture

Ming Pan, Farah Aziz, Baohong Li, Simon Perry, Nan Zhang, Igor Bulatov and Robin Smith

Applied Energy, 2016, vol. 161, issue C, 695-706

Abstract: Around 21% of the world’s power production is based on natural gas. Energy production is considered to be the significant sources of carbon dioxide (CO2) emissions. This has a significant effect on the global warming. Improving power plant efficiency and adding a CO2 capture unit into power plants, have been suggested to be a promising countermeasure against global warming. This paper presents a new insight to the application of energy efficient technologies in retrofitting natural gas combined cycle (NGCC) power plants with CO2 capture. High fidelity models of a 420MW NGCC power plant and a CO2 capture plant with CO2 compression train have been built and integrated for 90% capture level. These models have been then validated by comparisons with practical operating data and literature results. The novelty of the paper is to propose optimal retrofitting strategies to minimize the efficiency penalty caused by integrating carbon capture units into the power plant, including (1) implementing heat transfer intensification techniques to increase energy saving in the heat recovery steam generator (HRSG) of the power plant; (2) extracting suitable steam from the HRSG to supply the heat required by the capture process, thus on external heat is purchased; (3) employing exhaust gas recirculation (EGR) to increase the overall energy efficiency of the integrated process, which can benefit both power plant (e.g. increasing power plant efficiency) and capture process (e.g. reducing heat demands). Compared with the base case without using any integrating and retrofitting strategies, the optimal solution based on the proposed approaches can provide sufficient heat to CO2 capture process, and keep the same power generation. The optimal solution shows that, the flue gas flow-rate is reduced 33% in the inlet of CO2 capture process, heat demand in CO2 capture decreases 4.3%, heat output from the power plant increases from 0MW to 133MW, and more than 22% of profit is obtained in the integrated system. This demonstrates the validity and efficiency of the proposed approaches in retrofitting existing NGCC power plants with CO2 capture.

Keywords: Natural gas combined cycle (NGCC) power plant; CO2 capture; Retrofitting; Heat transfer intensification (HTI); Exhaust gas recirculation (EGR) (search for similar items in EconPapers)
Date: 2016
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (26)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261915003190
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:161:y:2016:i:c:p:695-706

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2015.03.035

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().