Injection timing effects on partially premixed diesel–methane dual fuel low temperature combustion

E. Scott Guerry, Mostafa S. Raihan, Kalyan K. Srinivasan, Sundar R. Krishnan and Aamir Sohail

Applied Energy, 2016, vol. 162, issue C, 99-113

Abstract: Dual fuel low temperature combustion (LTC) strategies are attractive for future internal combustion engines due to their promise of very low engine-out emissions of oxides of nitrogen (NOx) and particulate matter. In the present work, experimental results for diesel-ignited methane dual fuel LTC on a compression ignition single cylinder research engine (SCRE) are presented. Methane was fumigated into the intake manifold and diesel injection was used to initiate combustion. The engine was operated at a constant speed of 1500rev/min, and diesel injection pressure was fixed at 500bar. The start of injection (SOI) of diesel fuel was varied from 260° to 360° (i.e., TDC) to quantify its impact on engine performance and engine-out, indicated-specific emissions of NOx (ISNOx), carbon monoxide (ISCO), and unburned hydrocarbons (ISHC), and smoke emissions. The SOI sweeps were performed at different net indicated mean effective pressures (IMEPs) of 4.1 and 12.1bar. Intake manifold pressure and methane percent energy substitution (PES) were fixed at 1.5bar and 80%, respectively, for 4.1bar IMEP and at 1.8bar and 95%, respectively, for 12.1bar IMEP. For all loads, when SOI was advanced, the longer ignition delays caused the separation between the fuel injection and the combustion events to increase. This was accompanied by a change in the shape of the AHRR curve from a distinct two-stage profile to a smooth, single-stage (almost Gaussian) profile. Advancing SOI to 300° and beyond yielded minimal engine-out ISNOx emissions (∼0.15g/kWh at 4.1bar IMEP and ∼1.3–1.5g/kWh at 12.1bar IMEP). Smoke emissions were negligible (<0.05 FSN) for all loads and all SOIs. Very high ISHC and ISCO emissions were observed for near-TDC SOI at all loads. The lowest ISHC and ISCO levels occurred for SOIs near 310° and for more advanced SOIs, both emissions increased. High pressure rise rates and the tendency to knock prevented engine operation at intermediate SOIs between 310° and 340° for 12.1bar IMEP. On the other hand, for both 4.1bar and 12. 1bar IMEPs, high coefficient of variation of IMEP (>5%) caused unstable engine operation for SOIs advanced beyond 280°.

Keywords: Injection timing; Low temperature combustion; Dual fuel; Natural gas; NOx emissions (search for similar items in EconPapers)
Date: 2016
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (10)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261915013124
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:162:y:2016:i:c:p:99-113

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2015.10.085

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().