Optimal design of multistage centrifugal pump based on the combined energy loss model and computational fluid dynamics

Chuan Wang, Weidong Shi, Xikun Wang, Xiaoping Jiang, Yang Yang, Wei Li and Ling Zhou

Applied Energy, 2017, vol. 187, issue C, 10-26

Abstract: This paper proposes a method to optimize the design of a typical multistage centrifugal pump based on energy loss model and Computational Fluid Dynamics (ELM/CFD). Different grid numbers, turbulence models, convergence precisions, and surface roughness are calculated for a typical multistage centrifugal pump. External characteristic experiments are also conducted to benchmark the numerical simulation. Based on the results, the ELM/CFD method was established including various kinds of energy loss in the pump, such as disk friction loss, volumetric leakage loss, interstage leakage loss as well as the hydraulic loss, which occurred at inlet section, outlet section, impeller, diffuser and pump cavity, respectively. The interactive relationships among the different types of energy losses were systematically assessed. Applying suitable setting methods for numerical calculation renders more credible results, and ensuring the integrity of the calculation model is the key contributor to the accuracy of the results. The interstage leakage loss is converted by the disk friction loss; thus, they are positively correlated, that is, the disk friction loss can be reduced by decreasing the interstage leakage loss. Concurrently, the volumetric leakage loss is negatively correlated with the disk friction loss; thus, increasing the volumetric leakage loss can effectively reduce the disk friction loss. The increment of the volumetric leakage loss is greater than the decrement of the disk friction loss for general centrifugal pumps. This relationship between these types of losses, however, does not apply to pumps with significantly low specific speed. Therefore, reducing the volumetric leakage and interstage leakage losses is the most effective technique to increase the efficiency of general centrifugal pumps. The impeller should be designed according to the maximum flow design method, because the inevitable volumetric leakage loss will improve the pump efficiency under rated flow condition. Several methods have been proposed to improve the pump efficiency.

Keywords: Energy loss model; Pump optimization; Multistage centrifugal pump; Computational fluid dynamics (search for similar items in EconPapers)
Date: 2017
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (32)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261916316324
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:187:y:2017:i:c:p:10-26

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2016.11.046

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().