Spatio-temporal evolution of diesel sprays at the early start of injection

Radboud Pos, Robert Wardle, Roger Cracknell and Lionel Ganippa

Applied Energy, 2017, vol. 205, issue C, 398 pages

Abstract: The impact of injector life on the spatio-temporal evolution of fuel spray quality was optically investigated using high speed imaging techniques. Both new and used injectors, which had been used in intense operation for up to 90,000 miles, were considered in this investigation. Used injectors are prone to wear, deposit formation, and altered internal nozzle flow. High resolution SEM images clearly portray the presence of carbonaceous deposits both at the injector tip as well as within the holes of used injectors. Investigations revealed that used injectors tend to produce a chaotic hole-to-hole variation at the start of each injection, resulting in an asymmetric early fuel spray penetration pattern in the first 500μs. Often those sprays that suffered a reduced spray tip penetration rate at the start of injection also showed off-axis transient expansions, and those sprays appeared to be bulky compared to other sprays. Following the early asymmetric spray penetration phase of injection the retarded sprays undergo rapid acceleration with time, and this transformed the early asymmetric spray pattern into a nearly uniform spray pattern from all the orifices in the quasi-steady state regime. The hole-to-hole penetration variations and the resultant asymmetric spray structure at the early start are therefore short lived transient phenomena. However if the radial expansion of the spray is large during the early phase, the radially expanded plume remains almost at the same radial location due to lack of local axial momentum, even after different time instants of spray tip propagation. This appears as a bulge to the spray and can eventually end up as a stationary local pocket of fuel vapor close to the nozzle for the entire duration of injection. This may alter the ignition, flame lift-off and entrainment characteristics of sprays injected from used or deposit rich injectors.

Keywords: Diesel sprays; Used injectors; Deposits; Transients; Start of injection anomalies; Hole-to-hole spray variation (search for similar items in EconPapers)
Date: 2017
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261917309649
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:205:y:2017:i:c:p:391-398

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2017.07.092

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().