The impact of natural gas/hydrogen mixtures on the performance of end-use equipment: Interchangeability analysis for domestic appliances

Harmen de Vries, Anatoli V. Mokhov and Howard B. Levinsky

Applied Energy, 2017, vol. 208, issue C, No S0306261917313302, 1007-1019

Abstract: The addition of hydrogen derived from renewable power to the natural gas network is being promoted as a viable means of storing excess wind and solar energy. However, the changes in combustion properties of the natural gas upon hydrogen addition can impact the performance of the end-use equipment connected to the gas grid. We assess the changes in safety and fitness for purpose of domestic natural gas appliances when supplied with natural gas/hydrogen mixtures. Upon hydrogen addition, the fitness-for-purpose limits are governed by changes in thermal input caused by changes in Wobbe Index, while the changes in risk of flashback are used to quantify the safety aspects. A method is introduced to assess changes in the propensity for flashback, using the computed laminar burning velocity and accounting for changes in equivalence ratio caused by the variations in fuel composition. The computations are seen to reflect the experimental behavior of Bunsen flames regarding flashback upon hydrogen addition to natural gas accurately. Comparing the changes in Wobbe Index and variations in burning velocity with those experienced by domestic appliances subjected to the range of natural gases ordinarily distributed to the end user provides an unambiguous and internally consistent method to assess changes in essential performance upon hydrogen addition. Thus, limits on hydrogen addition can be derived to maintain the current level of safety and fitness for purpose without the necessity of large-scale appliance testing. The results show that the maximum fraction of hydrogen in natural gas that maintains appliance performance depends on the composition of the natural gas to which the hydrogen is added. For fuel-rich premixed appliances, e.g., cooking burners, the maximum hydrogen admixture is seen to be limited by flashback, while loss of thermal input determines the maximum hydrogen fraction in modern lean-premixed appliances. The method is illustrated using a fictitious distribution band, but it can be applied to any regional or national situation. The method presented can be used to define efficient strategic roadmaps and provides essential knowledge for grid management assessments, aimed at introducing hydrogen into the natural gas infrastructure while maintaining performance for the end user.

Keywords: Hydrogen addition to natural gas; Power-to-gas; Domestic appliances; Flashback; Interchangeability; Laminar burning velocity (search for similar items in EconPapers)
Date: 2017
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261917313302
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:208:y:2017:i:c:p:1007-1019

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2017.09.049

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().