Comprehensive study of key operating parameters on combustion characteristics of butanol-gasoline blends in a high speed SI engine

Kaimin Liu, Yangtao Li, Jing Yang, Banglin Deng, Renhua Feng and Yanjun Huang

Applied Energy, 2018, vol. 212, issue C, 13-32

Abstract: An experimental research were performed in a spark ignition (SI), high speed engine with n-butanol blended ratio of 0%, 30% and 35% by volume to gasoline, and numerical calculation was conducted under different exhaust gas recirculation (EGR) rate and compression ratio combined with knock index (KI) by using GT-Power simulation software. This study aims to find out the common regularities about the effects of key variables such as butanol blend ratio, ignition timing, engine load, EGR rate and compression ratio combined with KI on combustion performance of butanol-gasoline blends in a high speed engine. Results show that, the butanol can achieve better knock resistance in SI engines, which allows earlier ignition timing. After the ignition timing optimized, the peak cylinder pressure (PCP) and the peaks of the rate of heat release (ROHR) rise obviously as the butanol blend ratio increases. Correspondingly, both the locations for PCP and the peaks of ROHR are advanced, which is beneficial to improve thermal power conversion efficiency. The PCP and the rate of pressure rise are obviously influenced by 50% mass fraction burned (MFB) and 10–90% MFB, but the gross indicated thermal efficiency (ITE) and net ITE are not consistent with the changing trend of 50% MFB and 10–90% MFB. The influence of engine load on combustion heat release is greater than that of engine speed. When the engine load increases, the gross ITE increases slightly, but the net ITE shows a noticeable upward trend. The burning rate of butanol-gasoline blends is more sensitive to the change of EGR rate than that of PG, and it is mainly affected by the oxygen concentration and in-cylinder temperature. The increase of compression ratio can boost the in-cylinder maximum combustion temperature, which benefits the improvement of in-cylinder temperature gradient and net ITE, but the rate of net ITE rise gradually decreases with the compression ratio increasing.

Keywords: Butanol; SI engines; Combustion characteristics; EGR; Engine load (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (9)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261917317245
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:212:y:2018:i:c:p:13-32

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2017.12.011

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().