Crank angle-resolved exergy analysis of exhaust flows in a diesel engine from the perspective of exhaust waste energy recovery

Hamidreza Mahabadipour, Kalyan Kumar Srinivasan, Sundar Rajan Krishnan and Swami Nathan Subramanian

Applied Energy, 2018, vol. 216, issue C, 44 pages

Abstract: Exhaust waste energy recovery (WER) is a critical component in the portfolio of efficiency improvement strategies being considered for internal combustion engines. This paper addresses an important existing knowledge gap by introducing a methodology for performing crank angle-resolved exergy analysis of exhaust flows from the perspective of exhaust WER in diesel engines. To this end, a single-cylinder research engine (SCRE) operating in conventional diesel combustion mode was tested at a load of 5 bar brake mean effective pressure (BMEP), speeds of 1200 and 1500 rpm, and boost pressures of 1.2, 1.5, 2, and 2.4 bar. The crank angle-resolved specific exergy and its thermal and mechanical components were calculated by combining experimental crank angle-resolved exhaust manifold pressure measurements with 1D system-level (GT-POWER) simulations. In addition, exhaust flow specific exergies in the “blowdown” and “displacement” phases of the exhaust process, the total exergy flow rates, and cumulative (time-integrated) exergy were quantified. The results obtained show that low boost pressures led to the highest crank angle-resolved specific exergy, the lowest specific mechanical exergy, and the highest specific thermal exergy. In general, the specific thermal exergy was dominant during the initial phase of the exhaust process while the specific mechanical exergy became important after peak mass flow rate was attained. Regardless of engine speed, with increasing boost pressure, the mechanical component of the cumulative exergy in the exhaust flow increased while the thermal component decreased. Consequently, the results indicate that highly boosted conditions may be more appropriate for direct WER with positive displacement expanders that leverage the mechanical component of exhaust exergy while low boost operating conditions may be better suited for other WER strategies that utilize the thermal component of exhaust exergy.

Keywords: Exergy; Waste heat recovery; Engine exhaust; Thermal exergy; Mechanical exergy; Exhaust blowdown (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261918301624
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:216:y:2018:i:c:p:31-44

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2018.02.037

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().