Analysis of a horizontal flow closed loop thermal energy storage system in pilot scale for high temperature applications – Part I: Experimental investigation of the plant

Christian Odenthal, Wolf-Dieter Steinmann and Stefan Zunft

Applied Energy, 2020, vol. 263, issue C, No S0306261920300854

Abstract: A unique large scale pilot plant of the CellFlux thermal energy storage concept is experimentally investigated. This storage concept consists of a regenerator type thermal energy storage volume, which is coupled to a finned tube heat exchanger by a circulating intermediate working fluid. The system investigated in this work operates at a temperature of 390 °C and uses air as intermediate working fluid which is conveyed by a centrifugal fan. The storage volume has a bed length of over ten meters and is of a novel design, where the air flows in horizontal direction. Since this approach could cause a flow maldistribution, a thorough analysis is of major interest for the accuracy of subsequent numerical simulations. The experiments reveal that the mass flow along the centerline can be up to 20% higher than the mean bulk flow. A significant maldistribution between top and bottom area, however, is not observed. As an alternative to the typically used rock filling, the storage volume is equipped with standard hollow bricks. These bricks are cost effective but do not have a well-defined shape. Thus, the predictability of the pressure drop by correlations found in the literature is unclear. It turns out that the measured pressure drop is evenly distributed in axial flow direction but generally higher than expected from the assumption of pure channel flow. Further experiments are conducted to validate the heat capacity of the bricks and to derive a correlation for the inner heat transfer between bricks and storage walls. Eventually, the aim of the experimental investigation is a general proof of concept as basis for the numerical investigation. Thus, all specifications of the plant and the storage material are provided. The plant is analyzed towards plausibility of heat losses, showing that heat losses can be predicted well within the given uncertainties.

Keywords: CellFlux; Regenerator; Thermal energy storage; Horizontal flow; Packed bed (search for similar items in EconPapers)
Date: 2020
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261920300854
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:263:y:2020:i:c:s0306261920300854

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2020.114573

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().