Investigation of engine performance for alcohol/kerosene blends as in spark-ignition aviation piston engine

Guibin Liu, Can Ruan, Zilong Li, Guan Huang, Qiyan Zhou, Yong Qian and Xingcai Lu

Applied Energy, 2020, vol. 268, issue C, No S0306261920304712

Abstract: Spark-ignition (SI) aviation piston engines are widely used on light helicopters and unmanned aerial vehicles (UAVs) because of the high-power density and ultra-high cost performance. Kerosene with high flash point is expected to improve safety of aforementioned aircrafts by replacing gasoline. However, in spark-ignition mode, kerosene is difficult to mix and is easy to knock. Short-chain alcohols have high volatility and octane number which can just make up for some defects of kerosene. In this paper, three kinds of alcohols including ethanol, n-propanol and n-butanol were blended with aviation kerosene (RP-3) by volume fraction of 30%, 50%, 70%, respectively. The combustion and emission characteristics of the blended fuels were deeply studied on a typical spark-ignition aviation piston engine. Meanwhile, engine performance fueled with commercial gasoline was also tested for comparison. Results indicated that alcohol/kerosene blends could reach higher brake thermal efficiency (BTE) (alcohol ratio ≥50%) compared to gasoline. Carbon monoxide (CO) and nitrogen oxides (NOx) emissions of blended fuels expressed dramatically descending. With the increase in alcohol ratio, the CO, hydrocarbons (HC) and soot emissions gradually decreased. The brake thermal efficiency showed an upward trend with the increase of alcohol ratios. The brake thermal efficiency of E70, P70 and B70 were increased by 2.15%, 3.52% and 6.51%, and the CO emissions of E70, P70 and B70 were reduced by 39.8%, 38.5% and 49.0%, respectively, compared to those of gasoline. Notably, n-butanol/kerosene blends exhibited the better combustion and emission characteristics, which had the higher efficiency and lower CO, HC and soot emissions.

Keywords: Alcohols; Kerosene; Spark-ignition aviation piston engine; Combustion and emission; Brake thermal efficiency (search for similar items in EconPapers)
Date: 2020
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261920304712
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:268:y:2020:i:c:s0306261920304712

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2020.114959

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().