Flow models of perforated manifolds and plates for the design of a large thermal storage tank for district heating with minimal maldistribution and thermocline growth

M. Pilotelli, B. Grassi, A.M. Lezzi and G.P. Beretta

Applied Energy, 2022, vol. 322, issue C, No S030626192200767X

Abstract: Large water tanks are used as thermal energy storage components in district heating systems to store sensible heat produced by intermittent energy sources and to decouple the production of thermal energy from its demand. Good thermal stratification is crucial for energy storage efficiency, thus flow maldistribution and mixing of water layers at different temperatures should be minimized. This paper proposes an innovative internal flow distribution configuration for a large-size thermal energy storage, and develops new simplified analytical models for the choice of its design parameters. In the novel configuration, water is injected into (and collected from) the cap volumes of the tank by flowing radially inward (outward) through several small orifices of a peripheral toroidal manifold. Two horizontal perforated plates cover the full cross sections downstream of the manifolds and rectify the vertical flow, thus reducing mixing. Uniform perforation pitch was analytically demonstrated to be the most reasonable solution both for the toroidal distributors and for the rectifying plates. A 1D model was developed to predict the time evolution of the vertical temperature distribution in the tank. The turbulence-related parameters that could not be inferred from the existing fluid-mechanics literature were initially estimated with CFD simulations. The results of CFD-calibrated model were then compared to experimental data obtained from a full-scale large water-tank facility recently built in Brescia according to the proposed design. After a re-calibration of the exponent defining the decay of homogeneous turbulence downstream of the perforated plates, good agreement was found between measured and predicted vertical temperatures. With the novel inlet design, a thermocline of about 0.5 m is established immediately downstream of the perforated plate, and remains practically constant along time. The model is important to minimize and control the thermocline thickness so as to maximize the recoverable thermal energy, not only at the tank design stage but also to identify optimal loading and unloading protocols.

Keywords: Thermal energy storage; District heating; Thermal stratification; Large water tank; Distribution design; Perforated plate (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S030626192200767X
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:322:y:2022:i:c:s030626192200767x

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2022.119436

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().