On a nonlinear broadband piezoelectric energy harvester with a coupled beam array

Hyo-Kyung Shim, Shuailing Sun, Hyun-Soo Kim, Dong-Gyu Lee, Yeon-Jeong Lee, Ji-Soo Jang, Kyung-Hoon Cho, Jeong Min Baik, Chong-Yun Kang, Yonggang Leng, Sunghoon Hur and Hyun-Cheol Song

Applied Energy, 2022, vol. 328, issue C, No S0306261922013861

Abstract: A conventional energy harvester usually has narrow operational bandwidth, which makes it difficult to harvest energy with varying frequencies in the actual field. Herein, a nonlinear piezoelectric energy harvester with a coupled beam array is designed to broaden bandwidth and improve energy harvesting performance. The proposed harvester consists of a base, two elastic supports, and four piezoelectric beams with different natural frequencies. Due to the coupling effect caused by the two elastic supports, the four piezoelectric beams have large output voltages not only at their own natural frequencies, but also at the natural frequencies of other beams. Meanwhile, the two elastic supports enable the four piezoelectric beams to become nonlinear beams, which also contributes to operational bandwidth broadening. Next, the equivalent mass-spring-damping model and governing equations of the harvester are obtained, based on the lumped-parameter method. A strong coupling is found to occur when the equivalent stiffness of the elastic support is small. Subsequently, a fabricated prototype and an experiment platform are utilized to measure the energy harvesting performance of the harvester. Under 1 g up-sweep excitation, the average output power of the harvester from 40 Hz to 80 Hz is 144.2 % higher and the bandwidth is 93.3 % wider than those of the non-coupled multi-resonance harvester, which houses four beams separately. Finally, actual applicability of the proposed energy harvester is evaluated by operating a Bluetooth location tracking Internet of Things (IoT) device without a battery. Besides, the fabricated prototype is applied to the vehicle engine where the frequencies of vibration sources change rapidly with time and velocity. The field test argues that the harvester can be used in unstable or varying conditions, where a typical vibration energy harvester may not work efficiently, due to its limited operational bandwidth.

Keywords: Piezoelectric energy harvesting; Multi-resonance beam array; Coupling effect; Structural nonlinearity; Frequency bandwidth (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261922013861
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:328:y:2022:i:c:s0306261922013861

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2022.120129

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().