Ceramic nanoparticles enhancement of latent heat thermal energy storage properties for LiNO3/NaCl: Evaluation from material to system level

Qingyang Luo, Xianglei Liu, Qiao Xu, Yang Tian, Haichen Yao, Jianguo Wang, Shushan Lv, Chunzhuo Dang and Yimin Xuan

Applied Energy, 2023, vol. 331, issue C, No S0306261922016750

Abstract: Focusing on the development of the next generation latent heat thermal energy storage (TES), molten salt is one of the most promising candidates, while it suffers from small thermal charging rate and low energy storage density. Adding ceramic nanoparticles (NPs) with high thermal conductivity and high chemical stabilities has been proposed to alleviate above problems. However, it’s very challenging to enhance both thermal conductivity and specific heat capacity (Cp) simultaneously. Besides, induced viscosity increment by NPs will instead reduce the thermal charging rate of TES system, due to suppressed natural convection of molten salts. Herein, concurrent enhancement in solidus thermal conductivity and Cp is demonstrated by doping MgO NPs into LiNO3/NaCl, which are improved by 63.5 % and 32.3 % at 4 wt%, respectively. The underlying mechanism is attributed to very low interfacial thermal resistance (Rb = 2.424 × 10−9 K·m2·W−1) between MgO and LiNO3/NaCl. Benefiting from enhanced Cp, the total energy storage density increases from 662.9 J·g−1 to 671.7 J·g−1 for temperature range of 50–300 °C despite decreased phase change enthalpy. The viscosity has a sharp increase from 4.2 cP to 22.4 cP when NPs concentration rises from 0 wt% to 10 wt% at 360 °C. When being applied in TES system, the optimal concentration of MgO NPs is found to be 4 wt%. The thermal charging rate of TES system is suppressed when NPs concentration is too low or too high due to limited thermal conduction and inhibited natural convection, respectively. Viscosity is verified as important as thermal conductivity in system level evaluation. This work helps to guide the design of high-performance molten salts in TES system, so as to achieve both faster thermal charging rate and higher energy storage density.

Keywords: Thermal energy storage; MgO nanoparticles; Specific heat capacity; Thermal conductivity; Viscosity (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (7)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261922016750
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:331:y:2023:i:c:s0306261922016750

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2022.120418

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().