A comprehensive insight into the thermal runaway issues in the view of lithium-ion battery intrinsic safety performance and venting gas explosion hazards

Gang Wei, Ranjun Huang, Guangxu Zhang, Bo Jiang, Jiangong Zhu, Yangyang Guo, Guangshuai Han, Xuezhe Wei and Haifeng Dai

Applied Energy, 2023, vol. 349, issue C, No S0306261923010152

Abstract: A comprehensive understanding of thermal runaway (TR) features and battery venting gas (BVG) explosion characteristics is the critical issue of thermal hazard prevention. In this study, commercial-size lithium-ion batteries with LiFePO4 (LFP) and Li(NixCoyMnz)O2 (NCM, x from 0.5 to 0.8) cathode materials, as well as the micro-overcharged cells, are triggered to TR under adiabatic conditions using an accelerating rate calorimeter. In addition, the obtained BVG is transferred into the gas chromatograph for further component identification. Subsequently, the specific values of the intrinsic battery safety performance (TR tolerance and TR hazards) and BVG explosion risks (lower explosion limits, LEL) are calculated. The results show that, from the perspective of battery TR evolution features, LFP batteries have greater TR tolerance than NCM batteries. Moreover, the TR hazards of NCM batteries are more severe than LFP batteries and worsen with increasing nickel content, which is proved by ambient temperature and post-disaster analysis. The primary types of BVG consist of hydrogen, carbon monoxide, carbon dioxide and hydrocarbon gases for both LFP and NCM batteries. However, due to the significant amount of hydrogen and hydrocarbon gases with low LEL values, the LEL values of BVG for LFP batteries are lower than NCM batteries, demonstrating the higher deflagration risks for the former. Besides, the LEL values of NCM batteries' BVG increase with higher energy density. A single micro-overcharge leads to lower TR tolerance and TR hazards but has little effect on LEL values for NCM cells. It is obvious that the safety issues associated with LFP batteries should also be given sufficient attention to avoid system-level explosions. The quantitative evaluation results of this paper provide new ideas for battery intrinsic safety performance assessment and a clear direction for mitigation strategy of battery TR-related secondary disasters.

Keywords: Commercial-size lithium-ion batteries; Thermal runaway; Intrinsic safety performance; Venting gas explosion hazards; Cathode material; Micro-overcharge (search for similar items in EconPapers)
Date: 2023
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (10)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261923010152
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:349:y:2023:i:c:s0306261923010152

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2023.121651

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().