Latent thermal energy storage performance enhancement through optimization of geometry parameters

Mateo Kirincic, Anica Trp, Kristian Lenic and Josip Batista

Applied Energy, 2024, vol. 365, issue C, No S030626192400638X

Abstract: In the paper, thermal performance of vertically oriented shell-and-tube type latent thermal energy storage (LTES), which uses water as the heat transfer fluid (HTF) and RT 25 paraffin as the phase change material (PCM), has been optimized by obtaining the most favorable values of three analyzed geometry parameters; fin number, LTES unit aspect ratio and fin thickness. Optimization procedure has been performed according to two objective functions; maximization of the average latent heat flux and maximization of the LTES thermal effectiveness. Optimization of the selected set of analyzed geometry parameters for selected objectives, as well as providing optimum values of analyzed parameters for charging, discharging and the overall cycle of charging and discharging, represent the novelty of the current work since they have all been insufficiently covered in the literature. Optimization procedure has been performed using response surface methodology and the Box-Behnken design of experiment. Using the experimentally validated mathematical model and numerical procedure, the responses were obtained numerically. For each objective, responses were approximated with a regression polynomial function and the fitness of each function was assessed with the coefficient of determination R2. Optimized LTES configurations' thermal performance enhancement was evaluated through comparison with the experimental LTES thermal performance. For the LTES configuration optimized with the objective of maximizing the average latent heat flux considering the overall charging and discharging cycle, the average latent heat flux was enhanced by 32.4% during charging and by 45% during discharging. For the LTES configuration optimized with the objective of maximizing the LTES thermal effectiveness considering the overall charging and discharging cycle, the LTES thermal effectiveness was enhanced by 8.6% during charging and by 11.8% during discharging. Optimized configurations have been additionally compared with the experimental LTES configuration in terms of selected performance indicators and significant decrease in melting/solidification times have been observed. Optimization results can be used in designing more efficient LTES tanks and provide guidelines for further optimization procedures.

Keywords: Latent thermal energy storage; Geometry optimization; Numerical simulations; Response surface methodology (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (1)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S030626192400638X
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:365:y:2024:i:c:s030626192400638x

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2024.123255

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().