Role of spent FCC catalyst in pyrolysis and CO2-assisted gasification of pinewood

Fatih Aktas, Athi-enkosi Mavukwana, Kiran Raj Goud Burra and Ashwani K. Gupta

Applied Energy, 2024, vol. 366, issue C, No S0306261924007335

Abstract: This paper examines the potential for synergistic benefits of co-utilizing three waste streams of pinewood, spent fluid catalytic cracking (sFCC) catalyst, and waste CO2 via thermochemical conversion. For this, a lab-scale fixed-bed semi-batch scale reactor facility is utilized to investigate the impact of using sFCC catalyst and its reusability on the syngas output, quality, and energy during pyrolysis and CO2-assisted gasification of pinewood 800–900 °C. Results are reported on the pyrolysis and CO2-assisted gasification of pinewood, as well as the impact of using sFCC catalyst and its reusability on syngas output, quality, and energy. Incorporating the catalyst without direct contact with the solid feedstock resulted in syngas enhancement and reusing this catalyst led to <5 wt% char formation from the gasification at 900 °C. The addition of FCC catalyst improved the total CO yield and its rate with an increase in temperature due to improved cracking of volatiles and their simultaneous reforming using CO2. In addition, the syngas and energy yields decreased when the catalyst was in direct contact with the solid biomass which also acted as a barrier between the feedstock and gasifying agent, leading to lower CO production. Catalytic gasification at 900 °C using CO2 provided combustible gas output that was 1.4 times higher than the feedstock mass which suggests that at least 0.4 g of CO2 consumption for combustible gases, such as H2 and CO. This points to the synergistic potential in co-utilization of waste streams of biomass, spent FCC catalyst, and CO2 that provided not only waste management and energy recovery but also energy efficient carbon sequestration. Temperature programmed oxidation of the char residue left from the pyrolysis and gasification tests and coke that forms on the sFCC catalyst revealed conversion of about 0.1 g of the feedstock to coke that was significantly more resistant to oxidation than the char formed.

Keywords: Pinewood; Catalytic CO2 gasification; Catalyst reuse; Fluid catalytic cracking (sFCC) catalyst; In-situ; Quasi-in-situ (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261924007335
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:366:y:2024:i:c:s0306261924007335

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2024.123350

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().