Enhancing the methane production from methane hydrate by cyclic N2–CO2 gas injection and soaking method: Significance of the slow diffusion-controlled process

Masahiro Yasue, Yoshihiro Masuda and Yunfeng Liang

Applied Energy, 2025, vol. 379, issue C, No S0306261924022955

Abstract: Methane hydrate (MH) is a crucial lower-carbon energy resource in climate mitigation and current energy transition. A depressurization technique has been mainly attempted to produce methane gas. Simultaneously, the exchange of CH4 from gas hydrates by N2–CO2 has been studied to enhance methane gas production and CO2 sequestration. We conducted experiments with hydrate-bearing cores by applying the cyclic injection and soaking method. An N2–CO2 gas (ca. 60 mol% CO2) was injected into a core during the injection period, and the core was allowed to stand stationary during the soaking period. Concurrently, a numerical model was developed to simulate the gas production performance of the cyclic injection and soaking method. This model considers a two-stage process for the gas replacement phenomena between CH4 and (N2 + CO2) in the hydrate: an almost immediate replacement at the hydrate surface followed by a more gradual diffusion-controlled replacement in the subsurface hydrate layer. The rapid replacement is modeled by phase equilibrium between the vapor phase and the hydrate surface. The diffusion due to the difference in concentration of each gas component between the surface hydrate layer and the inner hydrate describes the slow gas replacement phenomenon. By repeating four cycles of soaking and injection, the experiments achieved a high CH4 recovery factor of 67.7 % and a high exchange ratio of 54.7 %. About 18 % of the CO2 injected gas was sequestrated. The soaking process enhanced methane recovery by 1.5 times in the recovery factor compared to the first injection production and almost half of the CH4 molecules in MH were extracted. Our simulations demonstrated excellent agreement with experimental results, confirming the soaking process is very efficient for methane recovery. From the production history matching, the diffusion coefficient of CH4 molecules in the solid-state MH during slow replacement phenomena was estimated to be on the order of 10−19 m2/s, significantly smaller than those of previous research.

Keywords: Methane hydrate; CH4–(N2 + CO2) exchange; Soaking; Diffusion coefficient; Numerical simulation (search for similar items in EconPapers)
Date: 2025
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261924022955
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:379:y:2025:i:c:s0306261924022955

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2024.124912

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().