Use of fine-grained shredder dust as a cement admixture after a melting, rapid-cooling and pulverizing process

Kohji Kakimoto, Yasuko Nakano, Takehiro Yamasaki, Keisuke Shimizu and Takashi Idemitsu

Applied Energy, 2004, vol. 79, issue 4, 425-442

Abstract: Shredder dust is a residue, which is removed from valuable ferrous metals found in scrap automobile and electronic waste. It is also an industrial waste byproduct which, under legislation in place since April 1996, must be disposed of in landfill sites. One method of disposing shredder dust is by scorification, however, this is a costly process and therefore impractical. Costs could be reduced if the shredder dust had a valuable use, and, in this paper, the authors examine its effectiveness as a cement admixture. First, molten shredder dust was crushed for use as a cement admixture. However, it was difficult to crush it completely because metallic grains were mixed in with molten shredder dust. These particles were removed by sifting and the molten shredder dust was crushed once again. Eventually, a fine 75 [mu]m and less powder type of slag was obtained. This slag was mixed with Ordinary Portland Cement (OPC) to form a cement mortar and subsequently a mortar test was conducted. From the test results, it was found that the long-term strength of the cement did not deteriorate even when it included 30% by weight of the pulverized molten shredder dust.

Keywords: Shredder; dust; Quenched; granulated; slag; Evaluation; test; Crush; Cement; admixture (search for similar items in EconPapers)
Date: 2004
References: View complete reference list from CitEc
Citations: View citations in EconPapers (2)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306-2619(04)00008-X
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:79:y:2004:i:4:p:425-442

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().