Evaporatively-cooled compression using a high-pressure refrigerant

H. Perez-Blanco, Kyoung-Hoon Kim and Stephen Ream

Applied Energy, 2007, vol. 84, issue 10, 1028-1043

Abstract: Evaporative cooling of fluids under compression reduces the input work with relatively low equipment costs. Currently, water injection at about 1% of the air mass-flow rate is used; additional cooling can be obtained with higher injection rates. Water is non-toxic and relatively non-corrosive, which makes it the fluid of choice for evaporatively-cooled compressors in gas turbines. Water does have a relatively low vapor-pressure, that tends to limit the amount evaporated, although its large heat of vaporization partially compensates for this deficiency. Residence times in compressors are of the order of hundredths of seconds. Hence, the time available for evaporation is brief. One expectation is that higher-vapor-pressure refrigerants could evaporate at higher rates, and hence overcome some of the limitations of water. We present here a study of such a refrigerant, but the results fall short of expectations: evaporation is projected to occur fast initially, but the reduced work expectation does not fully materialize. A heat-and-mass transfer model that predicts droplet evaporation is used for our projections. Three parameters are varied to determine their effects on the compressor calculated performance: injection ratio, initial droplet radius, and pressure ratio. Low compressor discharge temperatures appear possible, which in some applications in gas turbines could uphold definite promise for recuperative cycles. Yet, the difficulties associated with the combustion process involving a refrigerant may very well override all other considerations. For the general case of evaporatively-cooled compression, high-pressure substances would need much larger heats of vaporization than the ones considered here for their application to be sustainable as compared with water.

Keywords: Evaporative; cooling; Compressor; Gas; turbine; Ammonia; injection; Power; reduction (search for similar items in EconPapers)
Date: 2007
References: View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306-2619(07)00044-X
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:84:y:2007:i:10:p:1028-1043

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().