Particle size, porosity and temperature effects on char conversion

I.I. Ahmed and A.K. Gupta

Applied Energy, 2011, vol. 88, issue 12, 4667-4677

Abstract: The effect of particle size, porosity and reactor temperature/reaction rate constant on the progress of a char particle conversion has been investigated numerically by solving the transport equation inside a reacting char particle. Numerical simulations have been conducted for three cases that include two extreme cases and one general case. The two extreme cases correspond to a very large Damkohler number (3.2607×103) and a very small Damkohler number (0.0042). The third case corresponds to an intermediate value of Damkohler number. For the very large Damkohler number case, concentration profiles of the gasifying agent showed a steep gradient across the particle and the reaction occurred mostly in outer layer of the particle. This behavior corresponds to a diffusion controlled process. For the very small Damkohler number case, gasifying agent concentration was a straight line parallel to the x-axis, with a y-axis value of the surrounding concentration. The reaction occurred homogeneously across the particle and the degree of conversion was only a function in time. This behavior corresponds to a chemically controlled process. The total conversion of the char particle as a function of time has also been calculated for different particle sizes, initial porosity and reaction rate constant. Variation in conversion profiles as a function of time due to variation in initial porosity and reaction rate constant were limited to a certain extent. Very high initial porosity values tend to shift the process towards a chemically controlled one; any further increase in porosity does not have a positive effect on the conversion–time relationship. Very high reaction rate constants tend to shift the process towards diffusion controlled process. Kinetic parameters have been determined experimentally using a chemically controlled process. The obtained parameters have been used in the model to determine the progress of char particle conversion at an increased reactor temperature of 1000°C. The model has been compared to experimental results at the same temperature (1000°C). The results showed very good agreement.

Keywords: Char gasification; Diffusion resistance; Char porosity; Particle size; Gasification temperature (search for similar items in EconPapers)
Date: 2011
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261911003710
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:88:y:2011:i:12:p:4667-4677

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2011.06.001

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().