Effects of nozzle length on flame and emission behaviors of multi-fuel-jet inverse diffusion flame burner
H.S. Zhen,
Y.S. Choy,
C.W. Leung and
C.S. Cheung
Applied Energy, 2011, vol. 88, issue 9, 2917-2924
Abstract:
An experimental study was performed to investigate the effects of the nozzle length on the air-pollutant-emission and noise-radiation behaviors of a burner utilizing a multi-fuel-jet inverse diffusion flame (MIDF). Comparison of the experimental results obtained from two MIDF burners, one with a long nozzle and the other with a short nozzle, operating under the same air/fuel supply conditions (Reair and Ф) shows rather significant differences in the flame appearance, flame centerline temperature, CO/CO2 concentrations and the noise radiation. The nozzle length influences development of the jets and hence interaction between the air/fuel jets including their mixing process. The short nozzle produces a flame with a shorter base height and a smaller potential core due to the enhanced air/fuel mixing. It also leads to faster and more complete combustion at the inner reaction cone of the flame due to the stronger and faster air/fuel mixing. The nozzle length affects the CO and CO2 concentrations, and higher peak values are obtained with the short-nozzle flame. Flame noise of the MIDF is defined as the noise radiation at different flame heights, which is of varying strength but of the same dominant frequency in the range of 250–700Hz. The noise radiation from the inner reaction cone of the flame is stronger than that from the lower and upper parts of the flame, and the maximum noise radiation occurs when the total amounts of air and fuel in the combustion zone are at the stoichiometric air/fuel ratio. For all the experiments conducted in the present study, the MIDF produced by the long nozzle is always noisier than its counterpart and it is due to the increase of the low-frequency noise components.
Keywords: Inverse diffusion flame; Air/LPG combustion; CO/CO2 emissions; Flame noise radiation; Burner design (search for similar items in EconPapers)
Date: 2011
References: View complete reference list from CitEc
Citations: View citations in EconPapers (7)
Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261911001528
Full text for ScienceDirect subscribers only
Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.
Export reference: BibTeX
RIS (EndNote, ProCite, RefMan)
HTML/Text
Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:88:y:2011:i:9:p:2917-2924
Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic
DOI: 10.1016/j.apenergy.2011.02.040
Access Statistics for this article
Applied Energy is currently edited by J. Yan
More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().