The effect of SO2 on CO2 capture by CaO-based pellets prepared with a kaolin derived Al(OH)3 binder

Firas N. Ridha, Vasilije Manovic, Arturo Macchi and Edward J. Anthony

Applied Energy, 2012, vol. 92, issue C, 415-420

Abstract: High-temperature CO2 capture by Ca looping cycles was investigated in the presence of SO2. The sorbents tested included natural limestone (HV-P), pellets formed from powdered limestone with a binder (HV-AH) and pellets formed from powdered acetified limestone with a binder (HV10-AH). The binder used in pellet preparation was Al(OH)3 obtained from acid leaching of kaolin. Simulated flue gas with a composition of 15% CO2, 3% O2, 0.45% SO2, and N2 balance was used during the CO2 capture step. Two calcination conditions were employed for sorbent regeneration: pure CO2 at 920°C and pure N2 at 850°C. By five reaction cycles, the well-developed porous texture of HV10-AH acetified by 10vol.% acetic acid did not offer better CO2 capture than that for natural limestone at 650°C for calcination in CO2; instead it promoted a higher SO2 retention than that for the limestone. Unfortunately, the CO2 capture capacity for all sorbents calcined in CO2 in the presence of SO2 was effectively eliminated after 2–3 cycles. Calcination in N2 did not significantly enhance CO2 sorbent capture capacity; but instead it improved the SO2 retention ability of HV10-AH, for which the sulphation level was over twice that of the natural limestone. Increasing the carbonation temperature to 700°C enhanced sulphation rather than carbonation with HV10-AH, but produced the opposite effect with natural limestone. In general, it appears that SO2 impedes CO2 capture, leading to a negligible CO2 capture capacity after only few cycles regardless of how the sorbent morphology is modified, which suggests any method designed to improve sorbent performance for CO2 capture will not be proof against significant SO2 concentrations in flue gas. These results suggest that despite the fact that sorbent performance can be influenced to some extent by altering carbonation and calcination conditions; the presence of SO2 must be avoided if the objective is CO2 capture from flue gas.

Keywords: CO2 capture; Limestone; Ca-looping; Ca-based sorbent; SO2 (search for similar items in EconPapers)
Date: 2012
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (14)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261911007331
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:92:y:2012:i:c:p:415-420

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2011.11.036

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().