Development of direct resistive heating method for SO3 decomposition in the S–I cycle for hydrogen production

Hongqiang Li, Geng Tan, Wenyu Zhang and Sam Suppiah

Applied Energy, 2012, vol. 93, issue C, 59-64

Abstract: The Sulfur–Iodine (S–I) cycle has been considered as one of the efficient and promising thermochemical water-splitting cycles for hydrogen production using nuclear energy. However, the catalytic SO3 decomposition process in the S–I cycle demands high temperature heat (>800°C). Existing nuclear reactors cannot provide such heat for SO3 decomposition. AECL proposed a direct resistive heating concept to compensate for the requirement of high temperature heat. An experimental program was established at AECL to demonstrate the concept and to develop reliable catalyst structures for SO3 decomposition. Due to the high temperature and harsh chemical environment, Hastelloy C-276 was selected as the material for the heating element and reactor. The catalyst was directly applied on the surface of an electrical heating element. SO3 was produced online from H2SO4 in a pre-heated vessel. The SO3 decomposition percentage was determined using the measured O2 concentration in the exit gas stream. The results showed that SO3 decomposition can be successfully achieved with the direct resistive heating method. As much as 90% of the initial SO3 was decomposed under the experimental conditions explored. The Pt-based catalyst performed better than the Fe-based catalyst in the low temperature region (<700°C). The effect of carrier gas flow on SO3 decomposition was also considered.

Keywords: Resistive heating; SO3 decomposition; Hydrogen production; S–I cycle; Nuclear energy (search for similar items in EconPapers)
Date: 2012
References: View complete reference list from CitEc
Citations: View citations in EconPapers (8)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261911002054
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:93:y:2012:i:c:p:59-64

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2011.03.035

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().