Recycling construction and industrial landfill waste material for backfill in horizontal ground heat exchanger systems

Yasameen Al-Ameen, Anton Ianakiev and Robert Evans

Energy, 2018, vol. 151, issue C, 556-568

Abstract: This research experimentally and numerically investigates the possibility of recycling some low cost construction and industrial waste landfills materials as potential backfills in horizontal ground heat exchangers (HGHE). The aim of this study was to compare the temperature distribution development in different backfill materials with respect to time. The tested materials include sand, crushed basalt, broken brick, crushed concrete, and metallic by-products including copper slag, aluminium slag, mill-scale and iron ores (fine and pellets). Initial thermal testing on these materials in an environmental climatic chamber indicated concrete and crushed brick had similar performance to sand, whereas metallic materials had better performance by up to 77% improvement compared to sand. Various percentages of the backfill material (20, 40, 60, 80 and 100%) blended with the remaining percentage of sand showed that the higher the percentage addition of the waste material, the better the heat storage of the enhanced sand. Particle size distribution was also a significant parameter in backfill selection, where medium sized particle sizes (1.18–2 mm) performed 92% better compared to course and fine gradations of the same material. An experimental set-up of a HGHE system was then constructed and filled with the best performing backfill materials to determine the heat storage and release processes on the thermal performance of the system. The paper also reports results from a transient three-dimensional finite volume model developed in ANSYS Fluent 17.2 computational fluid dynamic (CFD) software of a thin section of a HGHE. The experimental and numerical model were used to predict and analyze the temperature distribution developing within the surrounding backfill material with respect to charging (heating) and discharging (extracting heat) modes of the HGHE. Results obtained from both experimental and numerical studies show the temperature range and duration of hot water produced from the system were in line with low temperature space heating guidelines and that mill-scale, copper slag and aluminium slag were the best backfill materials, where the thermal capacity of the HGHE system can be doubled using these materials, compared to the use of sand alone. Congruence between the numerical simulations and experimental data was found.

Keywords: Energy; Horizontal ground heat exchanger; Waste materials; Temperature distribution; Space heating (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544218305048
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:151:y:2018:i:c:p:556-568

DOI: 10.1016/j.energy.2018.03.095

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().