Influences of fuel injection strategies on combustion performance and regular/irregular emissions in a turbocharged gasoline direct injection engine: Commercial gasoline versus multi-components gasoline surrogates

Chenxu Jiang, Zilong Li, Yong Qian, Xiaole Wang, Yahui Zhang and Xingcai Lu

Energy, 2018, vol. 157, issue C, 173-187

Abstract: Injection strategies and fuel properties have significant effect on the mixing process of fuel and air in the cylinder, which further affects the combustion and emissions. Three types of gasoline surrogate fuels were tested on a gasoline direct injection (GDI) engine in this paper. The effects of different injection pressures and injection timings on the combustion and emissions of the surrogate fuels were investigated, and the results were compared with those of a commercial gasoline with an octane number of 95. Also, the experiments were conducted at a stoichiometric air-fuel ratio with the engine speed of 2000 rpm and a load of 6 bar. The results show that injection pressure and injection timing have certain effects on the combustion and emissions of the surrogate fuels, which indicates clear differences with the commercial gasoline. In addition, the combustion and emissions of the surrogates are also different due to different compositions. The surrogates have higher in-cylinder pressure and temperature and more advanced combustion phase than commercial gasoline. The surrogates have advantages in NOx emissions and PM emissions under all the testing conditions. Nevertheless, gasoline has much lower CO emissions, THC emissions and most irregular emissions. Generally, low injection pressure and retarded injection timing can be applied to obtain higher thermal efficiency of the surrogate fuels, whereas for gasoline, the injection timing need to be kept at around 300 oCA BTDC. To obtain low CO and THC emissions, gasoline should be applied with low injection pressure and the injection timing should be postponed. On the other hand, for low PM and NOx emissions, the surrogate fuels should be utilized with high injection pressure and the injection timing should be around 300 oCA BTDC.

Keywords: Fuel injection strategy; Gasoline surrogate; Gasoline direct injection engine; Regular emission; Irregular emissions; Combustion (search for similar items in EconPapers)
Date: 2018
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (5)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544218310041
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:157:y:2018:i:c:p:173-187

DOI: 10.1016/j.energy.2018.05.160

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().