 The thermodynamic and economic characteristics of the modern combined cycle power plant with gas turbine steam coolingJanusz Kotowicz, Mateusz Brzęczek and Marcin Job Energy, 2018, vol. 164, issue C, 359-376 Abstract: This paper presents a methodology to clearly identify energy benefits (in terms of power and efficiency) resulting from the use heat from gas turbine steam cooling and heat from cooling air. These potential benefits are evaluated in terms of the characteristics of combined cycle power plants in a wide range of pressure ratios β = 10 ÷ 100. Calculations were made for four variants (optimistic and conservative), differing in terms of the performance characteristics of the compressor and turbine isentropic efficiency as a function of β and the permissible temperature of the expander blades in the gas turbine. The steam part of the power plant in question is composed of a classical steam cycle with a triple-pressure subcritical heat recovery steam generator (HRSG) with reheating, to which gases from a gas turbine are fed at a constant temperature of 630 °C. The power plant also has an additional steam cycle utilizing the heat from cooling the air from the intercooler of the air compressor. The impact of using steam cooling on the electrical efficiency of the gas turbine as well as the entire power plant is presented. This was compared to classical open-air cooling, achieving a gas turbine electrical efficiency seven percentage points higher for high pressure ratios. Using steam and air heat, the combined cycle power plant achieves a net electrical efficiency of more than 65% for β ≥ 95. This paper presents the calculation algorithm of the break-even cost of electricity Celb-e (at the NPV = 0) and the cost of the components as a function of the pressure ratio β. In addition, the efficiency and power degradation of the power plant over time is presented. The lowest cost Celb-e = 64.85 €/MWh (at the fuel price 8.179 €/GJ) was obtained for the compression ratio β = 31. But, the range of compression ratios for which this is close to the optimum is wide and is within the range of β = 18 ÷ 53. Sensitivity analysis of the break-even cost of electricity to changes in microeconomic factors was performed for case O1 (characterized by the highest net electrical efficiency of the unit), such as: investment costs, gas fuel price, power plant operating time and CO2 emission allowance cost. This showed that a change in these factors has little effect on the change in the optimal gas turbine pressure ratio, while significantly affecting the profitability of the combined cycle power plant. Calculations show that the thermodynamic optimum (maximum efficiency) and economic optimum (minimum break-even cost of electricity) do not overlap. Keywords: Combined cycle power plant; Gas turbine; Efficiency; Steam cooling (search for similar items in EconPapers) Downloads: (external link) Related works: Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:164:y:2018:i:c:p:359-376 DOI: 10.1016/j.energy.2018.08.076 Access Statistics for this article Energy is currently edited by Henrik Lund and Mark J. Kaiser More articles in Energy from Elsevier |
Is your work missing from RePEc? Here is how to contribute.
Questions or problems? Check the EconPapers FAQ or send mail to .
EconPapers is hosted by the
School of Business at Örebro University.