Sodium receiver designs for integration with high temperature power cycles

Tim Conroy, Maurice N. Collins and Ronan Grimes

Energy, 2019, vol. 187, issue C

Abstract: A variety of tube materials and geometries are considered in an analysis that identifies suitable sodium receiver designs for integration with next-generation thermodynamic power cycles. Sodium is capable of delivering outlet temperatures of >750∘C, however the net power output diminishes with rising temperatures due to tube material limitations on allowable flux density and increasing heat losses. Small tube diameters facilitate large thermal efficiencies and heat fluxes for all materials, however a large pressure drop penalty can somewhat mitigate these advantages. Traditional heat exchanger alloys perform quite poorly in comparison to Inconel 617 and Haynes 230, with allowable heat flux decreasing significantly as temperatures are increased beyond 600∘C. Multi-pass concepts offer greater control of flow-path exposure to the heat flux boundary condition than straightforward single-pass designs. A triple-panel design with small diameter Inconel 617 tubes balances thermal, hydraulic, and mechanical performance most effectively across all temperatures. For all candidate materials, sodium can augment power plant efficiency when integrated with a high temperature cycle (>600∘C). A combined receiver and power cycle efficiency percentage point improvement of 1.5% is possible using Ni-based superalloys at ∼650−700∘C compared to a baseline outlet temperature of 550∘C, resulting in a solar-to-electric power output increase of over 4%.

Keywords: High temperature cycles; Allowable flux density; Sodium receiver; Tube material; Thermal performance; Mechanical reliability (search for similar items in EconPapers)
Date: 2019
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544219316883
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:187:y:2019:i:c:s0360544219316883

DOI: 10.1016/j.energy.2019.115994

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().