Performance improvement of supercritical carbon dioxide power cycle at elevated heat sink temperatures

Hafiz Ali Muhammad, Junhyun Cho, Jongjae Cho, Bongsu Choi, Chulwoo Roh, Hafiz Ahmad Ishfaq, Gilbong Lee, Hyungki Shin, Young-Jin Baik and Beomjoon Lee

Energy, 2022, vol. 239, issue PD

Abstract: The supercritical carbon dioxide power cycle has emerged as an advanced power generation system owing to its better efficiency, compactness, and capability to synergize with a broad range of boundary conditions. Its superior performance is due to the liquid-like compression near the critical point. However, this phenomenon deteriorates significantly for elevated heat sink temperatures and is therefore highly detrimental to the cycle performance. Thus, this study proposed and investigated an integrated power and refrigeration cycle scheme to curtail the effects of elevated heat sink temperatures. A theoretical model of the proposed scheme based on industrial flue gases was developed, and the influence of heat sink at a range of heat-source temperatures (200–500 °C) was examined. Subsequently, benchmark cases are established and optimized, and the performance improvement with respect to the benchmark case is reported, with net power as the performance indicator. The optimization of the benchmark case reveals that the simultaneous optimization of low- and high-pressure levels of the cycle is necessary to maximize the net power. The parametric investigation of the proposed configuration shows that the performance is sensitive to the saturation temperature in the evaporator of the refrigeration cycle and to the ratio of low- and high-pressure levels in the power cycle. Therefore, the proposed case was optimized for both influencing parameters for each boundary condition. The results show that for a given heat-source temperature, higher heat sink temperatures favor the proposed design. For the heat-source temperatures of 200 °C, the benchmark case is superior for all heat sink conditions, whereas for 300 °C, 400 °C, and 500 °C, the proposed system results in an increase in power generation of 10.67%, 7.2%, and 5.2%, respectively, at a sink temperature of 50 °C. Finally, a case study with molten salt as the heat source was conducted, and the results indicated that the proposed scheme outperformed the benchmark case by 32.87% in terms of net power. The results are significant in simplifying the design of pressurization components and performance improvement of the supercritical carbon dioxide power cycle at elevated heat sink temperatures.

Keywords: Supercritical carbon dioxide power cycle; Integrated refrigeration cycle; Elevated heat sink temperatures; Parametric study (search for similar items in EconPapers)
Date: 2022
References: View references in EconPapers View complete reference list from CitEc
Citations: View citations in EconPapers (3)

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544221024646
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:239:y:2022:i:pd:s0360544221024646

DOI: 10.1016/j.energy.2021.122216

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().