Thermodynamic analysis and life cycle assessment of a new method for the preparation of ultrafine copper powders by supercritical hydrothermal synthesis integrating biomass supercritical water gasification

Zhiyong Peng, Jianghua Tian, Runqiu Dong, Hanbing Jia, Liang Wu, Zhigang Liu, Jialing Xu, Hui Jin, Bin Chen and Liejin Guo

Energy, 2025, vol. 315, issue C

Abstract: Supercritical hydrothermal synthesis (SCHS) technology is expected to produce small particle size, high-quality ultrafine copper powders on a continuous, large scale. However, current SCHS methods rely heavily on high-value chemical reductant agents for the reduction process. This paper proposed a new method for the preparation of ultrafine copper powders by SCHS integrating biomass supercritical water gasification (SCWG). The use of hydrogen from SCWG of biomass not only avoids the use of chemical reductant agents but also accelerates the reduction rate of the SCHS process. Here, the process model developed for the preparation of ultrafine copper powders was investigated by thermodynamic analysis and life cycle assessment (LCA). The exergy flow analysis showed that the modules with the highest exergy destruction in the original system were the cooler 2 (36.25 %) and the oxidation reactor (23.37 %). Waste heat recovery using the organic Rankine cycle (ORC) and biomass slurry preheating can increase the exergy efficiency of the system by 20.52 % and reduce the energy used to produce 1 kg of Cu by 38.41 MJ. Sensitivity analysis showed that decreasing the ratio of preheated water to slurry and increasing the SCHS temperature favored the system efficiency due to the reduced consumption of combustible gas in the oxidation reactor. LCA quantified the global warming potential (GWP) and acidification potential (AP) of the system during typical operation to be 15.81 kg CO2-eq/kg Cu and 0.41 kg SO2-eq/kg Cu, respectively. The use of carbon capture and storage (CCS) technology can avoid CO2 emissions reducing the GWP to 2.93 kg CO2-eq/kg Cu, which is 10.91 kg CO2-eq/kg less than the cyclic solid-phase reduction method. This work may provide new conceptual designs for the preparation of ultrafine copper powders by SCHS.

Keywords: Supercritical hydrothermal synthesis; Supercritical water gasification; Ultrafine copper powders; Thermodynamic analysis; Life cycle assessment (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544225000386
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:315:y:2025:i:c:s0360544225000386

DOI: 10.1016/j.energy.2025.134396

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().