Eccentric elliptical cone groove anode design for SOFCs: trade-offs between the cell's power density increment and the imposed thermal gradients

Chunwei Zhang, Jiaxin Wang, Kai Zhang, Yijie Chen, Weidong Zheng and Zijing Li

Energy, 2025, vol. 334, issue C

Abstract: This study develops a novel three-dimensional planar SOFC model through a tailored design of the anode support layer with an eccentric conical groove. Four geometric parameters-the ellipse's grooving depth h, the long semi-axis a, scaling ratios k, and the centers distance w-was optimized to slow down the thermal gradient while increasing the current density. The presence of elliptical grooves significantly accelerates the gas flow rate entering the electrolyte, and thus leads to a more robust electrochemical reaction and heat dissipation. Thereby, the maximum cell power increases substantially by 44.09 % from 28,977.37 W/m2 to 41,754 W/m2, due to improvement in the Ohm's and concentration polarization (the equilibrium potential Eeq > 0.5 V) at low operating voltages below 0.6 V. The increment in the power density is further evaluated through the hydrogen conversion rate, velocity configurations, and Damköhler number (Da, ratio of chemical reaction to mass diffusion rate) along the slot depths for different h, w, and k, which provides insights into the enhanced mass transfer and chemical reactions. However, the introduction of grooves amplifies local temperature gradients (increasing from 196 K/cm to 439 K/cm), the gradient can be reduced to 281 K/cm by either adjusting the long semi-axis a or expanding the distance w, disrupting the thermal boundary layer thickness to enhance gas convective heat transfer. That is a 36 % improvement relative to the worst-case scenario, yet still 43 % higher than the baseline. This trade-off necessitates advanced thermal management in high efficiency SOFCs.

Keywords: Solid oxide fuel cell; Anode support layer; Current density; Temperature gradient; Hydrogen conversion; Damköhler number (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0360544225032177
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:334:y:2025:i:c:s0360544225032177

DOI: 10.1016/j.energy.2025.137575

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().