Experimental and numerical investigation of ammonia-water direct injection nozzle configurations for knock suppression in gasoline spark-ignition engines

Bo Shen, Yan Su, Beiping Jiang, Xiaoping Li, Zhaohui Jin, Hao Yu and Long Zhang

Energy, 2025, vol. 334, issue C

Abstract: This study experimentally and numerically evaluates the impact of ammonia-water direct injection (DI) nozzle configurations on knock suppression in gasoline spark-ignition (SI) engines under high-load conditions. The original six-hole injector was modified into two single-hole variants: DI-1 (nozzle holes oriented toward the piston) and DI-2 (holes directed toward the cylinder head). Experiments analyzed 12 end-of-injection (EOI) timings (−330°CA to 0°CA ATDC) and varying direct injection ratios (DIr) to assess knock suppression, combustion stability, and temperature distribution. Numerical simulations using CONVERGE software validated experimental results and provided insights into in-cylinder spray dynamics and flame propagation. Findings revealed that DI-1 significantly outperformed DI-2, achieving a broader effective knock suppression range (KI reduction up to 42 %) at minimal pulse widths (DIr = 3.5 %) due to enhanced cooling of the end-gas mixture via piston-directed spray alignment with tumble flow. Early-phase injection near bottom dead center (BDC, −180°CA ATDC) optimized cooling efficiency by maximizing spray dispersion during compression, whereas delayed injection post-BDC diminished suppression due to altered spray-wall interactions. The original six-hole injector, despite requiring higher DIr (9.5 %), demonstrated robust cooling performance but faced challenges in precise low-flow control. Combustion analysis highlighted that ammonia-water injection reduced peak cylinder pressure (by 8–12 %) and delayed combustion phasing (CA50 by 4–6°CA), necessitating a balance between DIr and ignition timing to avoid excessive retardation. Temperature field simulations confirmed DI-1's superior peripheral cooling, reducing high-temperature regions (>730 K) by 18 % compared to DI-2. This work underscores the viability of ammonia-water as a knock inhibitor and proposes nozzle orientation optimization as a critical pathway for minimizing inhibitor consumption while maintaining thermal efficiency. The results provide actionable insights for designing high-performance DI systems in downsized, high-efficiency SI engines.

Keywords: Ammonia-water; Gasoline; SI engine; Knock suppression; Nozzle configuration (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S036054422503258X
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:energy:v:334:y:2025:i:c:s036054422503258x

DOI: 10.1016/j.energy.2025.137616

Access Statistics for this article

Energy is currently edited by Henrik Lund and Mark J. Kaiser

More articles in Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().