Energy and exergy performance improvement of coupled PV–TEG module by using different shaped nano-enhanced cooling channels

Fatih Selimefendigil, Damla Okulu and Hakan F. Oztop

Renewable Energy, 2024, vol. 234, issue C

Abstract: In this study, impacts of using different cooling channels (L, T and U-shaped) on the energy and exergy performances of combined PV/TEG (photovoltaic/thermoelectric generator) unit are numerically assessed by using FEM based three dimensional high fidelity computational simulations. Cooling performance is boosted by using ternary nanofluid in the channels. The study is conducted for a range of Reynolds numbers (Re, between 50 and 500), nanofluid cooling inlet temperatures (between 15 °C and 23 °C), and nanoparticle loading amounts (between 0 and 3%). Evaluations are done on average PV-cell temperature, PV/TEG output powers, exergy efficiency, improve potential (IP), and sustainability index (SI). U-shaped and T-shaped channels are found to offer the greatest and worst cooling performances among various cooling channels. When comparing the lowest and maximum Re cases, the average temperature drops for PV cells are 3.54 °C for T channel and 2.55 °C for U channel. Exergy efficiency is determined to be 14.2% with T-channel at Re=50 and 14.6% with U-channel at Re=500. Taking into consideration different channels, an increase in the inlet temperature from 15 °C to 23 °C leads to an average rise in cell temperature of 6 °C. The IP rises with coolant inlet temperature while using T-channel. SI values fall as input temperature increases, although values between 1.164 and 1.175 may be achieved by using different cooling channels. Using nanofluid with higher loading results in higher exergy efficiency when comparing exergetic performances, with U-channel design exhibiting the highest performance. For the range of parameters considered, the coolant inlet temperature at the channel entry has the highest effect on PV cell temperature reduction; 8.5 °C of temperature reduction is feasible. By employing U-channel cooling, the maximum value of Re, the highest loading of nanoparticles, and the lowest inlet temperature yield the best exergy efficiency. The best and worst situations’ respective exergy efficiencies are determined to be 15% and 14.1%. Utilizing T-channel cooling with water at a flow flow rate and a higher input temperature is the scenario with the biggest potential for exergy improvement; the value is 2.9. When different operational parameters are varied, the SI falls between 1.176 to 1.16.

Keywords: PV–TEG combined unit; Ternary nanofluid; L/U/T channel; Exergy; CFD; Sustainability (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0960148124011273
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:renene:v:234:y:2024:i:c:s0960148124011273

DOI: 10.1016/j.renene.2024.121059

Access Statistics for this article

Renewable Energy is currently edited by Soteris A. Kalogirou and Paul Christodoulides

More articles in Renewable Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().