Development and characterization of mesoporous silica-MgSO4-MgCl2 binary salt composites for low-grade heat storage in fluidized bed systems

Xiao Liu, Fangming Yang, Xin Liu, Haomin Wang and Yupeng Wu

Renewable Energy, 2024, vol. 237, issue PB

Abstract: Achieving nearly zero-energy buildings requires the efficient utilization and storage of renewable energy. Salt-hydrate-based thermochemical energy storage (TCES) systems are promising due to their high heat storage capacity and minimal seasonal heat loss. However, challenges remain in their commercialization and large-scale application. For instance, TCES systems using magnesium sulphate (MgSO4) provide low temperature lifts due to slow reaction kinetics. Incorporating deliquescent salts like magnesium chloride (MgCl2) can enhance sorption performance but may introduce stability issues such as agglomeration and decomposition. This study presents a novel binary-salt composite combining MgSO4 and MgCl2 within commercial mesoporous silica (CMS) to address these challenges and enhance overall performance. The binary-salt composite powder, with a particle size range of 150–300 μm, is well-suited for use in fluidized-bed reactors, where fast mass and heat transfer promote efficient moisture adsorption, prevent uneven temperature distribution, and reduce agglomeration. Thermogravimetric analysis (TGA) was employed to evaluate the water sorption and desorption behaviour of MgCl2-MgSO4@CMS binary-salt composites with a total salt content of 50 wt% and salt mixing ratios of 3:1, 1:1, and 1:3. The corresponding water sorption capacities were 0.95, 0.68, and 0.57 g/g, respectively. In comparison, the MgSO4@CMS single-salt composite showed a lower water adsorption capacity of 0.47 g/g and required temperatures exceeding 150 °C for complete regeneration. Reactor-scale experiments demonstrated that the MgCl2-MgSO4@CMS composite with a 1:1 salt mixing ratio could be fluidized at low gas velocities on the order of 10−2 m/s, achieving a maximum temperature lift of 24.7 °C and an energy density of 1018 kJ/kg during hydration at 80% relative humidity and 30 °C. Additionally, the binary-salt composite showed good cyclic stability with less particle agglomeration compared to the MgCl2@CMS single-salt composite.

Keywords: Binary-salt composite; Fluidization; Hydration; Agglomeration; Temperature lift; Energy storage density (ESD) (search for similar items in EconPapers)
Date: 2024
References: View references in EconPapers View complete reference list from CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0960148124017361
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:renene:v:237:y:2024:i:pb:s0960148124017361

DOI: 10.1016/j.renene.2024.121668

Access Statistics for this article

Renewable Energy is currently edited by Soteris A. Kalogirou and Paul Christodoulides

More articles in Renewable Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().