 Large scale test of a novel back-pass non-perforated unglazed solar air collectorMiguel A. Paya-Marin, James B.P. Lim, Jian-Fei Chen, R. Mark Lawson and Bhaskar Sen Gupta Renewable Energy, 2015, vol. 83, issue C, 871-880 Abstract: This paper describes large scale tests conducted on a novel unglazed solar air collector system. The proposed system, referred to as a back-pass solar collector (BPSC), has on-site installation and aesthetic advantages over conventional unglazed transpired solar collectors (UTSC) as it is fully integrated within a standard insulated wall panel. This paper presents the results obtained from monitoring a BPSC wall panel over one year. Measurements of temperature, wind velocity and solar irradiance were taken at multiple air mass flow rates. It is shown that the length of the collector cavities has a direct impact on the efficiency of the system. It is also shown that beyond a height-to-flow ratio of 0.023 m/m³/hr/m2, no additional heat output is obtained by increasing the collector height for the experimental setup in this study, but these numbers would obviously be different if the experimental setup or test environment (e.g. location and climate) change. An equation for predicting the temperature rise of the BPSC is proposed. Keywords: Solar air heaters; Back pass non-perforated unglazed solar collector; Thermal efficiency; Renewable energy (search for similar items in EconPapers) Downloads: (external link) Related works: Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text Persistent link: https://EconPapers.repec.org/RePEc:eee:renene:v:83:y:2015:i:c:p:871-880 DOI: 10.1016/j.renene.2015.05.039 Access Statistics for this article Renewable Energy is currently edited by Soteris A. Kalogirou and Paul Christodoulides More articles in Renewable Energy from Elsevier |
Is your work missing from RePEc? Here is how to contribute.
Questions or problems? Check the EconPapers FAQ or send mail to .
EconPapers is hosted by the
School of Business at Örebro University.