European Journal of Engineering and Technology Research

2016 - 2026

From European Open Science
Bibliographic data for series maintained by Support ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2021, month November, vol 6

Power Quality and Performance Assessment of Grid-connected Photovoltaic Distributed Generation with Compliance to Stipulated Grid Integration Requirements pp. 1-10

Fredrick Nkado and Franklin Nkado

Adsorption Dynamics of Agricultural Waste Activated Carbon in Water Quality Improvement pp. 11-19

Igbemi Arthur Igbemi, Ify L. Nwaogazie, Onyewuchi Akaranta and G. O. Abu

Euler-Bernoulli and Timoshenko Beam Theories Analytical and Numerical Comprehensive Revision pp. 20-32

Abdarrhim M. Ahmed and Abdussalam M. Rifai

Investigation into the Application of Cissus Populnea as Drilling Fluid Additive (Viscosifier) for Water Based Mud pp. 33-37

A. D. I. Sulaiman, M. B. Adamu, Usman Hassan and S. M. Aliyu

Spectral Analysis of Electromagnetic Compatibility pp. 38-41

Raghavendra Dakuri Venkata

Fractographic Analysis of GTAW Robotic Welded Joints Fractured under Stress in Experimental HSLA Cr-Ni Steel pp. 42-47

Leyva L. Orión, Rosel P. Graciela and Gámez-C. Hugo

Elemental Analysis Using Atomic Absorption Spectroscopy pp. 48-51

Abdul Moiz Mohammed

Properties of Concrete Made from Cupola Furnace Slag and Recycled Construction Aggregates pp. 52-61

A. J. Adese, O. D. Olajide and O. A. Olaoyenikan

Improving the Response Performance of Anti-Surge Control Valve for Gas Compressors pp. 62-68

Haruna A. Ogweda and Joseph E. Okhaifoh

A Computational Fluid Dynamics-based Correlation to Predict Droplet Sauter Mean Diameter for ?? Yliq Atomization Model in Pressure Swirl Atomizer pp. 69-76

Sherry K. Amedorme and Joseph Apodi

Impact of Washing Process on the Physical Properties of Denim Fabric (Twill and Dobby) pp. 77-81

Abdullah Al Rakib Shikder, Jabed Hossen Emon, Md. Humayun Kabir Khan, Md. Mehedi Hasan and Md. Abu Bakar Siddiquee

Quality Assessment of Commercially Produced Sandcrete Blocks in Okitipupa Local Government Area, Ondo State, Nigeria pp. 82-86

A. J. Adese and O. D. Olajide

Experimental Study of the Effect of Misalignment on Rolling Element Bearing pp. 87-90

Mohsin H. Albdery and Istvan Szabo

Design and Fabrication of Low-Cost Incubator to Evaluate Hatching Performance of Egg pp. 91-96

Md. Janibul Alam Soeb, Muhammad Rashed Al Mamun, Shamima Shammi, Minhaj Uddin and Rukon Ahmed Eimon

Smart Wheelchair with Voice Control for Physically Challenged People pp. 97-102

Md Abdullah Al Rakib, Salah Uddin, Md. Moklesur Rahman, Shantanu Chakraborty and Fysol Ibna Abbas

Detecting Gas Leaks: A Case Study in IoT Technologies pp. 103-106

Kuo-Pao Yang, Patrick McDowell, Pratyush Devkota, Silvin Pradhan, Roshan Bhandari and Zachary Madewell

Adaptation of Cardinal Points Symmetry Landmarks Distribution Model to in-vivo B-Mode Ultrasound Images of Transverse Cross-section of Carotid Arteries pp. 107-113

Charles Nnamdi Udekwe and Akinlolu Adediran Ponnle

Effects of Inclination angle and Free Convection on Velocity Profile for a Steady 2-Dimensional Magnetohydrodynamic Fluid Flow in an Inclined Cylindrical Pipe pp. 114-117

B. Odongo, R. Opiyo and A. Manyonge

Controlling Factors of the Particle Size of Spherical Silica Synthesized by Wet and Dry Processes pp. 118-121

Keiji Saiki and Toshihiro Ishikawa

Characteristics of Stereo Imaging using Non-Identical Cameras for Object Detection pp. 122-126

Ahmed M. D. E. Hassanein, Amira H. N. AboElanen and Salma Ahmed H. Z.

Prospective Mapping of Schistosomian Risk by Markovian Modelling and Multi-criteria Analysis in Central Côte d'Ivoire pp. 127-132

Gnahoua Guy Roger Gnazalé, Adonis Krou Damien Kouamé and Valère-Carin Jofack Sokeng

Electrical Power Generation System: Optimal Design for Medium-Load Industries with High-Rated Generators pp. 133-139

Md. Janibul Alam Soeb, Md. Shahid Iqbal, Md. Abu Naser Mojumder, Muhammad Rashed Al Mamun, A. S. M. Shahjalal Atik and Md. Fahad Jubayer

Production of Clay-based Ceramic Filter for Water Purification pp. 140-143

A. S. Grema, I. M. Idriss, A. N. Alkali, M. M. Ahmed and M. H. Iyodo

Flexural Analysis of Thick Isotropic Rectangular Plates Using Orthogonal Polynomial Displacement Functions pp. 144-152

Onodagu P. Dinwoke, Aginam C. Henry and Uzodinma C. Franklin

Tomato Yield and Quality Response to Water Application Technique and Management pp. 153-159

Tom Gashari, Semwogerere Twaibu, Samuel Baker Kucel and David Magumba

Remote-mount Actuation Control: A Veritable Solution to Unreliability of Anti-surge Control Valves in Gas Compressors pp. 160-163

Haruna A. Ogweda and Joseph E. Okhaifoh

Effect of Hydrological Data on Flood Management in Urban Areas pp. 164-168

. Sumiharni and Lusmeilia Afriani

IoT Based Non–Technical Loss Detection and Mitigation System for Power Distribution Networks pp. 169-172

Emmanuel M. Eronu, Matthew O. Oboh, Emeka S. Ezeh, Gafar Tiamiyu and Farouq E. Shaibu

2021, month September, vol 6

Evaluation of the Effect of Deposition pH on the Physico-chemical Properties of Electrochemically Deposited Cadmium Telluride for Photovoltaic Device Applications pp. 1-7

Ayotunde A. Ojo, Kolade A. Olanipekun, Benjamin S. Oluwadare and Taiwo O. Oni

?n the Analysis of Certain Flotation Processes with Velocities Depending on Time and Height of the Column pp. 8-13

Daniela D. Parashkevova

Preliminary Study on the Reductive Leaching of Manganese Ores using FeSO?/Iron Powder as Reducing Agents under Room Temperature pp. 14-18

Kofi Moro, Frank Haubrich and Mirko Martin

Application of Correlation and Regression Models in Predicting the Physico-chemical Quality of Groundwater from Insitu Measured Parameters pp. 19-38

J. E. Agori, H. U. Nwoke, B. C. Okoro and B. U. Dike

A Review of Multi-Channel Medium Access Control Protocols for Wireless Sensor Networks pp. 39-53

Hanan Alahmadi and Fatma Boabdullah

IoT based Controlling of Power Grid pp. 54-57

Md Abdullah Al Rakib, Md. Moklesur Rahman, Md. Ashiqur Rahman, Shantanu Chakraborty, M. M. Abu Shahria Shawon and Fysol Ibna Abbas

Performance of Enhanced Steel Beam-Column Welded Connections for Seismic Resistance pp. 58-64

W. Aboalriha

Comparison of the Thermal and Electrical Conductivities of Pretreated Kenaf–Polyester Composites pp. 65-68

P. U. N. Obianuko, J. C. Obianuko and T. U. Onuegbu

GSM Based Home Safety and Security System pp. 69-73

Md. Abdullah Al Rakib, Md. Moklesur Rahman, Md. Sohel Rana, Md. Sanjib Islam and Fysol Ibna Abbas

Comparative Analysis of Off-grid Small Hydro-Solar PV-Diesel Hybrid System in South-west, Nigeria pp. 74-81

W. Ajeba, B. Adebanji and T. Fasina

Study of Classification of Human Emotion Features from EEG Signals at Minimum Free Energy Operated Effortlessly pp. 82-86

Hong Yu, Sean-Paul Tomer, Marcus Perla and Yvett Yu

Classification of Ultra-high Performance Concrete (UHPC) pp. 87-96

A. S. J. Smith and G. Xu

Development of an STM32 Microprocessor System for Automatic Continuous Remote Temperature Control in an Intensive Flow of People pp. 97-101

Ilgiz Bakiev

Application of Eigenvalues and Eigenvectors in Correlating Density and Fire Properties of Some Selected Woods in South-East Nigeria pp. 102-106

Vincent Nwalieji Okafor, Igwebuike Enweonye and Patrick Ugochukwu Umennadi

Evaluation of Qualitative Accelerated Tests Practices in Product Development Process: A Computer Simulation pp. 107-112

Laura Lima da Rocha, Marcelo Albuquerque de Oliveira and Gabriela de Mattos Veroneze

Pore Structure as a Determinant of Flexibility in Sustainable Lime-Cement Mortar Composites pp. 113-122

Sule Adeniyi Olaniyan

Stability of Underground Coal Mine Roadway Excavated in Soft Rock Mass pp. 123-131

Phanthoudeth Pongpanya, Vongsavanh Soysouvanh, Takashi Sasaoka and Hideki Shimada

Application of VSM to Improve a Television Productive Process of a Company in the Manaus Industrial Pole pp. 132-138

Camila Maria Costa da Silva, Marcelo Albuquerque de Oliveira, Gabriela de Mattos Veroneze and Polyana Almeida da Silva

Supply Chain System Model of Components for Assembly Lines Based on Kanban and Milk Run Methodologies pp. 139-144

Victor Hugo Oliveira dos Santos, Marcelo Albuquerque de Oliveira and Gabriela de Mattos Veroneze

Management Proposal for Consumable Item Control in an Electronic Company Using Concept of Human Reliability and Quality Tools pp. 145-153

Polyana Almeida da Silva, Marcelo Albuquerque de Oliveira, Gabriela de Mattos Veroneze and Camila Maria Costa da Silva

Low-Cost Pulmonary Ventilator for Patient Monitoring for Covid-19 Disease pp. 154-159

Md Abdullah Al Rakib, Md. Moklesur Rahman, Mousume Samad, Sanjib Islam, Md. Ashiqur Rahman and Fysol Ibna Abbas

Blockchain-based Intelligent Monitored Security System for Detection of Replication Attack in the Wireless Healthcare Network pp. 160-170

Jatinder Warraich, Chetanpal Singh and Prem Thapa

Modeling of the Direct Shear Test from the Finish Elements Method pp. 171-176

Kempena Adolphe, Mbilou Urbain Gampio, Mouanda Makanda Emilienne Greve, Rafael Guardado Lacaba, Antonio Olimpio Gonçalves and Boudzoumou Florent

2021, month July, vol 6

Comparative Study of Oil Recovery Factor Determination for Edge and Bottom Water Drive Mechanism Using Water Influx Models pp. 1-9

C. G. J. Nmegbu, Orisa F. Ebube and Emmanuel Aniedi Edet

A Review of Recent Deep Learning Models in COVID-19 Diagnosis pp. 10-15

Ela Bhattacharya and D. Bhattacharya

Dynamic Modelling of a Solar Energy System with Vehicle to Home Option for Newfoundland Conditions pp. 16-23

Raghul Suraj Sundararajan and M. Tariq Iqbal

Simultaneous Planning of Production, Setup and Maintenance for an Unreliable Multiple Products Manufacturing System pp. 24-34

Guy Richard Kibouka, Jean Brice Mandatsy Moungomo and Adoum Traoré Ndama

Optimization of Osmotic Dehydration Coupled to Hot Air Drying for the Production of Tomato Powder and Reconstituted Concentrates pp. 35-42

C. T. Maka, O. R. Isma-ila, J. F. Ekorong Akouan Anta and C. Kapseu

Comparison of Four MANOVA Test Statistic for Pig Production in Delta State, Nigeria pp. 43-49

J. M. Aniesedo and C. N. Okoli

Optimal Frequency Control Management of Grid Integration PV/Wind/FC/Storage Battery Based Smart Grid Using Multi Objective Particle Swarm Optimization MOPSO and Model Predictive Control (MPC) pp. 50-56

Adel Elgammal and Tagore Ramlal

Analysis of 5 Floors Brick Masonry Building Type 77/5 pp. 57-62

Petraq Koka, Nikolla Vesho and Fabion Shehu

Development and Application of Probabilistic Performance Index for Ranking N-1 Contingencies pp. 63-69

Saidu Y. Musa, Monday A. Madaki and Jinkai Haruna

Potential Energy Production from Biogas Economically and Environmental Profitable. Case Study: Establishing a Batch Digester in “Fogi” Farm pp. 70-72

Holta Prifti, Tania Floqi and Mirel Mico

The Neutrino Decay of the Free Neutron and the Neutrino Structure According to the Planck Vacuum Theory pp. 73-75

William C. Daywitt

Utilization of Renewable Energy: A Study on the Utilization of Solar Energy for Power Plants at the Campus of Universitas Samudra, Indonesia pp. 76-79

Hamdani Umar, Munira Amudy and T. Azuar Rizal

Development of a Multi-criteria Decision Model for Nigerian Refinery Bottlenecks pp. 80-83

T. B. Adeleke, R. O. Edokpia, M. K. Onifade and N. B. Chime

Effective Project Management and the Role of Quality Assurance throughout the Project Life Cycle pp. 84-88

Hengameh Fakhravar and Monier Madison Ouabira

LIA: A Mathbot Assistant for First-grade Students pp. 89-93

Lefteris Moussiades and George Zografos

The Study of Information Support System for Decision Making based on Kansei Engineering pp. 94-98

A. Hadiana, A. A. Wahid, A. Sofyan, D. Hirawan, K. Patalia and M. Z. Faruqi

Application of Failure Assessment Diagram (FAD) for Steel Welded Connection Based on BS7910 and DNV-RP-108 pp. 99-106

W. Aboalriha

Oil Sorption Performance of Sorbent Materials Examined Under Static and Dynamic Conditions pp. 107-110

Emmanuel E. Anwana and Oluseyi E. Ewemoje

Conceptual Design of an Unmanned Aerial Vehicle for Mars Exploration pp. 111-117

Ishan Mishra, Aayush Kumar and Vanshaj Malhotra

Implications of the Engineering Geological Properties of Soils in the Implementation of the Greater Jos Master Plan, North Central Nigeria pp. 118-128

Hannatu N. Wazoh and Stephen J. Mallo

Dry and Wet Waste Segregation and Management System pp. 129-133

Md Abdullah Al Rakib, Md. Sohel Rana, Md. Moklesur Rahman and Fysol Ibna Abbas

Retrofit Strategy in Existing Building for Implementing Energy Conservation Building Code in India pp. 134-140

Anil K. Berwal and Manisha Yadav

A Cooks Distance Approach to Control the Haz and Arc Length of Tig Mild Steel Weld pp. 141-145

F. O. Uwoghiren and A. Ozigagun

A Review on the Latest Developments of Conducting Polymer and Composite Coatings for Enhancing Biocompatibility and Corrosion Resistance of Metallic Biomedical Implants pp. 146-155

Mohammed Razzaq Mohammed, Safaa Hashim Radhi and Ahmed Namah Hadi

Medical Imaging using Deep Learning Models pp. 156-167

Chetanpal Singh

Performance Evaluation of a Small-Scale Mechanical Fish Feeder pp. 168-170

S. A. Fasoyin, W. A. Akinfiresoye, L. A. S. Agbetoye, L. A. Olutayo and O. Adetuyi

Prediction of Steering Angle for Autonomous Vehicles Using Pre-Trained Neural Network pp. 171-176

Jonah Sokipriala

Photoluminescent Enhancement by Effect of Incorporation Nickel in ZnO Films Grown pp. 177-180

Delfino R. Gutiérrez, Tomás Díaz-Becerril, Godofredo García-Salgado, Antonio Coyopol-Solís, Enrique Rosendo-Andrés, Reina Galeazzi-Isasmendi, Ramón Peña-Sierra, Crisóforo Morales-Ruiz, Roman Romano-Trujillo and Fabiola G. Nieto-Caballero

Synthesis, Crystal Growth, Crystal Arrangement, Optical, Thermal, NLO and Biological Investigations of Heterocyclic Compounds of N-(1,3-benzothiazol-2-yl)benzamide and N-(1,3-benzothiazol-2-yl)-2-fluorobenzamide pp. 181-189

C. Raveendiran and P. Prabukanthan

2021, month April, vol 6

3D-Position Determination using GNSS Techniques – A Comparative Analysis pp. 1-5

Temitayo A. Adeseye and Gafar Suara

Detection of EEG-Based Eye-Blinks Using A Thresholding Algorithm pp. 6-12

Dang-Khoa Tran, Thanh-Hai Nguyen and Thanh-Nghia Nguyen

The Zero-Point Oscillations in the Planck Vacuum State and Its Coordinate Uncertainty pp. 13-15

William C. Daywitt

Restructuring of Backrest and Drainage Provision System in the Campus Area pp. 16-21

Ofik T. Purwadi, L. Afriani and A. Zakaria

The Modelling and Simulation of 330 KV, 600 MW Shiroro Substation in the DIgSILENT Environment for Integration of Hybrid Solar PV – Hydro System to Improve Power Supply in the Federal Capital Territory (FCT) of Abuja from Shiroro, Nigeria pp. 22-29

Onyinyechi A. Uwaoma, Jonas N. Emechebe, Muhammed Uthman, Omotayo Oshiga and Samuel Olisa

Digitization in Archival Material Conservation Processes pp. 30-32

George Malaperdas

Hydraulic Modelling of Different Working Regimes in Water Pipeline. Case Study: Mihaliq – Water Treatment Plant “SHKABAJ” pp. 33-36

Gjelosh Vataj, Xhevat Berisha and Zenel Sejfijaj

Recognition of Automated Hand-written Digits on Document Images Making Use of Machine Learning Techniques pp. 37-44

Hiral Raja, Aarti Gupta and Rohit Miri

The Possibility of Developing Existing Residential Buldings by Installing Photovoltaic Modules Case Study: Libya – Zuwarah pp. 45-56

Marim M. A. Baka and Demet Irkli Eryildiz

Nested Hierarchical Design Application in Production of Ceramic Glazed Floor Tiles pp. 57-60

O. O. Akinbobola, J. I. Achebo, T. B. Adeleke and K. O. Obahiagbon

The Application of Fuzzy Inference System (FIS) to Determine the Employee Additional Salary pp. 61-66

Mujiono Sadikin, . Darminto and S. K. Purwanto

An Augmented Variable Neighborhood Search to Solve the Capacitated Location-Routing Problem pp. 67-76

Alireza Mohamadi-Shad, Hamed Niakan and Hasan Manzour

Cooking gas (LPG) Distribution to Rivers State Homes, Case Study: Choba Community pp. 77-84

Azubuike H. Amadi, Gogo-Isaiah E. Uneh, Onaivi C. Ene, Franklin C. Onwa and Djoï N. André

Data on Biogas Production Quality: Evidence from the Wastewater Treatment Plant of Durrës pp. 85-87

Stela Sefa, Tania Floqi and Julian Sefa

Filed Comparative Investigation of Loading Test on Micro-Piles Installed with Different Technique – (Case Study) pp. 88-93

M. N. Elsiragy

Study of Unbiased Plotting Position Formulae for the Generalized Extreme Value (GEV) Distribution pp. 94-99

Itolima Ologhadien

Effect of Existing Building Walls on the Geotechnical Behavior of Foundation under Earthquake Loading pp. 100-104

M. N. Massoud Elsiragy

FPGA Data Acquisition of Electrical Parameter pp. 105-123

Kennedy Ahamefula Iroanusi

A Survey of Factors on Design for Manufacture of Chemical Fertilizer Granulating Machine pp. 124-128

J. A. Ikimi, W. E. Odinikuku and T. B. Adeleke

Unified Vector Multiplication Approach for Calculating Convolution and Correlation pp. 129-134

Innocent E. Okoloko

The Use of Froth Flotation for Selective Separation of Plastic Wastes from Soil pp. 135-138

Kofi Moro and Dorothy A. Dechie

Optimization of Virgin Coconut Oil (VCO) Production with Diffuser Type Aeration Method pp. 139-143

Nyoman Sri Widari, Rahaju Saraswati and Bambang Sutejo

Investigations of Decoupled Trigonometric Saturated and Fuzzy Logic Techniques for the Automatic Frequency Control of Islanded Microgrid pp. 144-152

Mohammed Ali Alshehri and Sreerama Kumar R.

2021, month March, vol 6

A Review of Cloud-Based Malware Detection System: Opportunities, Advances and Challenges pp. 1-8

Ömer Aslan, Merve Ozkan-Okay and Deepti Gupta

Towards a Deep Leaning-based Approach for Hadith Classification pp. 9-15

Moath Mustafa Ahmad Najeeb

5G Network Deployment in Nigeria: Key Challenges and The Way Forward pp. 16-19

Cosmas Kemdirim Agubor, Nkwachukwu Chukwuchekwa and Longinus Sunday Ezema

Grammar Engineering for the Ekegusii Language in Grammatical Framework pp. 20-29

Benson Kituku, Wanjiku Nganga and Lawrence Muchemi

The Other Side: Negative Impacts of Exploiting Renewable Energy Sources pp. 30-33

Orisa F. Ebube and Etim E. Akan

Development of Models for Predicting Some Surface Responses in Oblique Metal Cutting Using Mild Steel and Coated Carbide pp. 34-38

I. T. Okafor, J. O. Osarenmwinda and M. K. Onifade

Asynchronous Collaborative and Interactive Learning Support System pp. 39-43

A. Hadiana, L. Leiliawati, M. Muslih, R. Rohmanto, N. Natalia and Y. Sudaryo

Control Management for Three Renewable Energy Generators and Diesel Generator for Rural/Remote Sites pp. 44-47

Wadah Aljaism and Walaa Hussein

Numerical Modeling of a Split Hopkinson Pressure Bar Test pp. 53-57

Ahmad R. Aljohani, Ramzi Othman and Khalid H. Almitani

Some Engineering Properties of Foamed Concrete for Sustainable Technological Development pp. 58-62

Felix A. Oginni and Samuel N. John

Thermo Power Plant “Kosovo B”– A Pollution Source for Sitnica River pp. 63-65

Besime Sh. Kajtazi and Tania Floqi

Passive Optical Network: A Fibre to the ‘X’ Approach pp. 66-74

R. O. Okeke, V. E. Idigo, M. O. Akemi and S. K. Ogbuokebe

The Features of Electronic Conduction in InAs pp. 75-78

E. Khutsishvilii, Z. Chubinishvili, G. Kekelidze, I. Kalandadze, T. Qamushadze and M. Metskhvarishvili

Modelling Production of Renewable Energy from Water Splitting High Thermal Electrolysis Processes pp. 79-86

Osaretin N.I. Ebuehi, Kingsley Abhulimen and Daniel O. Adebesin

Experimental Study of the Use of Phase Change Materials as Cooling Media on Photovoltaic Panels pp. 87-91

Razali Thaib, Hamdani Umar and T. Azuar Rizal

Statistical Analysis of Electric Power Distribution Grid Outages pp. 92-98

Godwin Diamenu

Experimental Study of Beeswax / Rice Husk Ash Phase Changes Material as Energy Storage in Concrete pp. 99-102

Razali Thaib

Design and Implementation of an Esp32-Based Smart Embedded Industrial Poultry Farm pp. 103-108

Longinus S. Ezema, Elochukwu C. Ifediora, Akande A. Olukunle and Nnaemeka C. Onuekwusi

Biogas Production in Laboratory Scale from Different Organic Wastes Using Primary Sludge as Co-substrate pp. 109-111

Holta Prifti and Tania Floqi

Evaluation of Optimal Wavelet De-noising Parameters to Predict Nutrient Content in Oil Palm Leaves using Spectroradiometer pp. 112-119

Helena A. J. Jayaselan, Wan I. W. Ismail, Abdul R. M. Shariff and Nazmi M. Nawi

Requirements and Design Consistency: A Bi-directional Traceability and Natural Language Processing Assisted Approach pp. 120-129

Omer Salih Dawood Omer, Abd-El-Kader Sahraoui, Mukhtar M. E. Mahmoud and Abd-El-Aziz Babiker

An MICP Algorithm for 3D Map Reconstruction Based on 3D Cloud Information of Landmarks pp. 130-138

Ba-Viet Ngo, Thanh-Hai Nguyen and Duc-Dung Vo

Evaluation of the Influence of the Level of Corrosion of the Reinforcing Steel in the Moment-Curvature Diagrams of Rectangular Concrete Columns pp. 139-145

Laura Landa-Ruiz, René Croche, Griselda Santiago-Hurtado, Victor Moreno-Landeros, Josefina Cuevas, Ce Tochtli Méndez, Manuel Jara-Díaz and Miguel Angel Baltazar-Zamora

Prediction of Optimum Weld Tensile Strength Using Response Surface Methodology pp. 146-149

C. E. Etin-Osa and L. M. Ebhota

Thermal-Hydraulic Performance Analysis by Means of Rectangular Winglet Vortex Generators in a Channel: An Experimental Study pp. 150-153

Oktarina Heriyani, Mohamad Djaeni and . Syaiful

Modelling of Harmonic Response of Scarf Adhesive Joints pp. 154-158

Awad A. Alqahtani, Khalid H. Almitani and Ramzi Othman

Automated Chair Design for an Excavator Machine pp. 159-163

Roshan Gangadhar Chavan

Estimation of a Planetary Gear Mesh Stiffness: An Approach Based on Minimising Error Function pp. 164-169

K. A. Olanipekun

Natural Frequency Analysis of a Jeffcott Rotor Having Stepped Shaft pp. 170-172

Ahmed A. Alahmadi, Khalid A. Alnefaie and Hamza Diken

Allocation Problems, by the Method of Alternative Representation of the Inverse Set, for Values of Cooperative TU Games pp. 173-177

Irinel Dragan

2021, month February, vol 6

Application of Augmented Water Flooding Using Ultrasound Energy to Improve Oil Recovery pp. 1-5

U. Hassan, M. B. Adamu, I. Bukar and M. A. Muhammad

Development of a YAMUGAG-20 Wireless Exploder for Safe Disposal of Military and Civil Explosives pp. 6-12

A. M. Na'inna, M. B. Yakubu, A. Mohammed, P. A. Uzuazor, A. Y. Abdullahi, U. H. Goje, A. Audu and I. N. Gana

Prediction of Fracture Pressure in Niger Delta Deep Offshore pp. 13-18

Kehinde E. Ajayi, Azubuike H. Amadi, Victor D. Ola, Raphael E. Obonin and Nnaemeka Achara

Features of the Electrochemical Deposition of Films from a Triple System of CoNiFe pp. 19-28

Robert Dmitrievich Tikhonov

Investigation of the Ultraviolet Irradiation on Blend Films of PS/PCL pp. 29-33

João de Deus Pereira de Moraes Segundo, Maria Oneide Silva de Moraes, Catarina Barbosa Levy and Walter Ricardo Brito

Performance Analysis of a Dual-Fuel Sugar Based Solid Rocket Propellant pp. 34-41

Gbadebo Omoniyi Adeniyi, Inkechukwu Nkere, Lanre Moshood Adetoro and Olusegun Samuel Sholiyi

Geochemistry and Petrogenetic Relationships Between Pegmatites and Host Rocks in the Keffi Area, North Central, Nigeria pp. 42-49

I. Y. Tanko and K. Dzigbodi-Adjimah

Optimal Sliding Mode Control of Permanent Magnet Direct Drive Linear Generator for Grid-Connected Wave Energy Conversion pp. 50-57

Adel Elgammal and Curtis Boodoo

Geochemistry and Mineralization of Some Selected Pegmatite Deposits in Panda North Central, Nigeria pp. 58-66

I. Y. Tanko and P. Chime

Properties of Anti-spalling Self-compacting Mortars - An Approach Towards Multifunctional Building Composite pp. 67-69

Sher Baz Khan and Hamza Tahir

Comparative Enhancement of Mild Steel Weld Mechanical Properties for Better Performance Using COPRAS–ARAS Method pp. 70-74

S. Nweze and J. Achebo

A Developed Sensor for Color Identification, Sorting and Counting Automation Control System pp. 75-80

Hong Yu, Alex Pyankov and Marcus Perla

A GIS-based Assessment of the Vulnerability to Potential Pollution of the Alluvial Aquifer of Aousja-Ghar El Melh (North-East of Tunisia) Using the Parametric Method DRASTIC pp. 81-87

Sarra Ouerghi

Quantification and Analysis of Uncertainties in Parameters of Rotors Supported by Bearings pp. 88-95

Caio C. O. da Costa and Cesar Da Costa

Comparative Cleaning Stages in Recovery of Copper and Cobalt from Tailings using Potassium Amylxanthate as Collector pp. 96-100

Meschack Mukunga Muanda, Pele Pascal Daniel Omalanga and Vanessa Mwambaie Mitonga

Non-Combustion ?He Powered Propulsion pp. 101-106

Nelson Enrique Bolivar and Ivaylo T. Vasilev

Comparative Evaluation of Probability Distribution Models of Flood flow in Lower Niger Basin pp. 107-117

Itolima Ologhadien

Reducing Uncertainties in Hydrocarbon Volumetric Estimation: A Case Study of Fuba Field, Onshore Niger Delta pp. 118-127

Franklin Fubara, Nnamdi J. Ajah, Jude U. Igweajah, Olayinka Yinka, Abdulmaliq Abdulsalam and Paul Mogaba

Extraction from Oily Sludge of Paraffinic Hydrocarbons with Gasoline as Solvent pp. 128-131

P. Ze Bilo’o and M. B. Ngassoum

Comparative Analysis of Microwave and Electric Arc as a New Method in Weed Control pp. 132-135

Hasan Sahin

Sounding Rocket Preliminary Design pp. 136-141

Nickolay Zosimovych

Enhancing OEE as a Key Metric of TPM Approach-A Practical Analysis in Garments Industries pp. 142-147

Md. Mahraj Uddin, Golam Sakaline and Mohammad Muhshin Aziz Khan

Performance Evaluation of a Smart Intrusion Detection System (IDS) Model pp. 148-152

Shah Md. Istiaque, Asif Iqbal Khan, Zaber Al Hassan and Sajjad Waheed

Rational Analysis of Thimi White Clay Deposits of Bhaktapur District, Nepal pp. 153-161

Jagadeesh Bhattarai, Madhusudan Dhakal, Nirjan Duwal, Narendra M. Adhikari and Susan Joshi

2021, month January, vol 6

Evaluation of Diethyl Ether (DEE) as a Renewable Transport Fuel in Sudan pp. 1-6

Mohamed Yagoub Alkhalil Karar, Hamid M. Mustafa and Eltjani EL. Hago

Selection of Probabilistic Model of Extreme Floods in Benue River Basin, Nigeria pp. 7-18

Itolima Ologhadien

Enhanced Fusion Mechanisms Towards Synthesizing Superheavy Elements pp. 19-30

Nelson Enrique Bolivar and Ivaylo T. Vasilev

InPAs Alloys Use for Electrical Engineering in Hard-radiation Environment pp. 31-35

Elza Khutsishvili, Nodar Kekelidze, Tengiz Qamushadze, Zurab Chubinashvili, Nana Kobulashvili and Georgy Kekelidze

Synthesis of Antiseptic Soap from Blends of Wood Tar and Some Selected Vegetable Oils pp. 36-41

Abdu Zubairu, Abdullahi S.B. Gimba and Mohammed B. Korode

Recent Advances in Coherent Anti-Stokes Raman Scattering of Carbon Dioxide for Combustion Diagnostic. (Article Review) pp. 42-47

Henry Misoi, Josephat Tanui and Patrick Wanjiru

Target Tracking Using Reinforcement Learning and Neural Networks pp. 48-54

Jezuina Koroveshi and Ana Ktona

Strengthening Prestressed Concrete Bridge Girders and Building Beams with Carbon Fiber Reinforced Polymer Sheets pp. 55-57

Herish A. Hussein and Zia Razzaq

Assessing the Correlation between Brick Properties and Firing Hours of Locally Produced Clay-burnt Bricks in Taraba State, Nigeria pp. 58-62

E. J Bassah and W. K. Joshua

Comparative Performance of the ARIMA, ARIMAX and SES Model for Estimating Reported Cases of Diabetes Mellitus in Anambra State, Nigeria pp. 63-68

C. V. Obi and C. N. Okoli

Thermal Analysis of the Effects of Multifaceted Conditions on Performance of Shell-and-Tube Heat Exchanger pp. 69-75

Taiwo O. Oni, Ayotunde A. Ojo, Daniel C. Uguru-Okorie and David O. Akindele

Effect of the Addition of Sugar Cane Bagasse Ash on the Compaction Properties of a Granular Material Type Hydraulic Base pp. 76-79

Laura Landa-Ruiz, Sabino Márquez-Montero, Griselda Santiago-Hurtado, Victor Moreno-Landeros, José Manuel Mendoza-Rangel and Miguel Angel Baltazar-Zamora

Determination of the Conditions for Agglomeration of Molybdenite Fines in the Presence of Kerosene Emulsion Through the Extended DVLO Theory pp. 80-86

Antonio López Mendoza and Alicia Elizabeth Chàvez Guajardo

Investigating Design Strategies for Regenerative Development pp. 87-94

Dorcas A. Ayeni and Victory O. Omeiza

Sudanese Oil Field Production Performance by Nodal Analysis Technique pp. 95-99

Fatima A. Elbrir

Real-Time Operating System (RTOS) with Different Application: A Systematic Mapping pp. 100-103

Sarah Khan

The Impact of Sugar Particles Size and Natural Substitutes for the Replacement of Sucrose and Fat in Chocolate Brownies: Sensory and Physicochemical Analysis pp. 104-113

Aislinn M. Richardson, Andrey A. Tyuftin, Maurice G. O’ Sullivan, Kieran N. Kilcawley, Eimear Gallagher and Joseph P. Kerry

The Choke as a Brainbox for Smart Wellhead Control pp. 114-118

Stanley I. Okafor, Azubuike H. Amadi, Mobolaji A. Abegunde and Joseph A. Ajienka

Another Statistical Distribution: The Exponentiated Complementary Mukherjee-Islam Distribution pp. 118-123

Oyedeji Isola Osowole, Ngozi Nzelu and Rita Nwaka

Physico-Mechanical Properties of Plaster of Paris (Gypsum Plaster) Reinforced with Paper Pulp pp. 124-132

Ngwe Nnoko Ngaaje

Analysis of Rock Mass Rating Classification with Using RMR Method pp. 133-136

Sukardan Tawil, Muh. Imran Syam and Irianto Uno

Problems in Electric Systems Caused by Harmonics and Solution Proposals pp. 137-141

Kemal Metin, Huseyin Ceylan, Ertugrul Demirkesen, Kadir Canatan and Mikail Hizli