European Journal of Engineering and Technology Research

2016 - 2026

From European Open Science
Bibliographic data for series maintained by Support ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2020, month December, vol 5

Double Beam Energy Harvester Based on PZT Piezoelectrics pp. 1-10

Renato Rangel, José Sobrinho, Alan Silva, Cícero Souto and Andreas Ries

Comparing the Planck-Vacuum and Urantia-Book Depictions of the Seven-Dimensional Spacetime pp. 11-13

William C. Daywitt

Effects of Covid-19 on Crude Oil Price and Future Forecast Using a Model Application and Machine Learning pp. 14-18

Azubuike H. Amadi, Orisa F. Ebube, Silas I. Aire and Chigoziri B. Marcus

Application of Information and Technology in Supply Chain Management: Case Study of Artificial Intelligence – A Mini Review pp. 19-23

Hieu Bui Trong and Uyen Bui Thi Kim

Multi-terrain Quadrupedal-wheeled Robot Mechanism: Design, Modeling, and Analysis pp. 24-33

Eric Gratton, Mbadiwe Benyeogor, Kosisochukwu Nnoli, Oladayo Olakanmi, Liam Wolf, Zavier Berti, Sushant Kumar and Piyal Saha

Design of Smart Hybrid Power Supply using Logic Circuits pp. 34-38

Ahmed M. D. E. Hassanein

Effect of Turbine and Compressor Inlet Temperatures and Air Bleeding on the Comparative Performance of Simple and Combined Gas Turbine Unit pp. 39-45

Basharat Salim, Jamal Orfi and Shaker Saeed Alaqel

An R-L Static Var Compensator (SVC) pp. 46-51

A. J. Onah, E. E. Ezema and I. D. Egwuatu

Forecasting Models of the Coronavirus (COVID-19) Cumulative Confirmed Cases Using a Hybrid Genetic Programming Method pp. 52-60

Konstantinos Salpasaranis and Vasilios Stylianakis

Effectiveness of Constructed Indoor Air Purifier to Enhance Indoor Air Quality pp. 61-66

Vinit J. Kedare, Smruti S. Kharat and Sonal Tawde

Geotechnical Characteristics of Regolith Derived from Nanka Formation, Southeast Nigeria pp. 67-75

Stella Nwaife Chibuzor, Elizabeth lfeyinwa Okoyeh and Boniface Chukwukadibia Ezeanyaoha Egboka

Seasonality and Software Vulnerabilities in Major Database Management Systems pp. 76-81

HyunChul Joh

Nigerian Defence Academy Shooting Zone: Soil Speciation of the Kwanar-Doya Military Shooting Range, Kachia, Kaduna State, Nigeria pp. 82-87

Jonathan Maduka Nwaedozie, Femi Emmanuel Awe and Ifeanyi Charles Aghanwa

An Experimental Investigation of Mechanical Properties of Bonded Concrete pp. 88-91

F. M. Tehrani

Effects of Two Pre-Treatment Methods on Water Absorption Property of Polyester-Fibre Composites pp. 92-95

Pauline N. Obianuko and Tessy U. Onuegbu

Potentials of Processed Palm Kernel Shell Ash (Local Stabilizer) and Model Prediction of CBR and UCS Values of Ntak Clayey Soils in Akwa Ibom State, Nigeria pp. 96-106

S. A. Assam and J. C. Agunwamba

Vision, Challenges and Future Perspectives of Low Constrained Devices IOT Operating Systems: A Systematic Mapping Review pp. 107-115

Sumera Rounaq and Muhammad Iqbal

Using Cellular Automata as a Basis for Procedural Generation of Organic Cities pp. 116-120

Melek B. Temuçin, İlker Kocabaş and Kaya Oğuz

A Decision Making in Selection of Bricks Using Multiple Attribute Decision Making Methods pp. 121-125

Satish Kumar Jain

Chemical Characterization of Nine Locally Made Cement Products for Quality Assurance in Nigeria Cement Industry pp. 126-129

Stephen A. Odewale, Atilade A. Oladunni and Babatunde O. Oyewale

Introducing Secondary Education Students to Programming through Sound Alerts pp. 130-139

Theofani S. Sklirou, Areti Andreopoulou, Anastasia Georgaki and Nikolaos D. Tselikas

Experimental Study of Twin Connected Pipe Jets pp. 140-144

Shams Sourav, Ashraful Hossain Rifat, Muhammed Hasnain Kabir Nayeem and Md. Abu Taher Ali

Development and Assessment of Cracking and Sorting Processes of Palm Kernel Nut Machine pp. 145-151

A. J. Bakri, T. B. Ajayi, K. O. Oladerin and A. O. Mogbojuri

Optimal Sizing of a PV System in Golpayegan, Iran Using Thermal Modeling-based Load Demand pp. 152-156

A. Zare and M. T. Iqbal

2020, month November, vol 5

A Brief Review of Heat Sink, Heat Pipe, and Vapor Chamber as a Key Function of Thermal Solution for Electronic Devices pp. 1297-1300

Mohamed Elnaggar, Mohammed Abu Hatab and Ezzaldeen Edwan

Design and Construction of a Double Pipe Heat Exchanger for Laboratory Application pp. 1301-1306

C. E. Ebieto, R. R. Ana, O. E. Nyong and E. G. Saturday

Design Analysis of a Portable Manual Tyre Changer pp. 1307-1318

Ovundah King Wofuru-Nyenke

Lateral-Torsional Buckling Strength of Two-Span Glass Fiber Reinforced Polymer Beams pp. 1319-1321

Mojtaba B. Sirjani and Zia Razzaq

Characterization of Multi-Drug Resistant Gram-Negative Bacteria Present in Fresh Leafy & Salad Vegetables in Dhaka, Bangladesh pp. 1322-1327

Shahrin Akter Aurin, Sohana Parvin Chowdhury, Maruf Abony, Jarin Rifa, Avijit Banik, Aneeka Nawar Fatema, Oshin Ghurnee and Zakaria Ahmed

Artificial Intelligence Techniques for Information Security in 5G IoT Environments pp. 1328-1333

Ivan Petrov and Toni Janevski

Dynamic Analysis of Encastre Beams by Modification of the System’s Stiffness Distribution pp. 1334-1342

V. O. Okonkwo, C. H. Aginam and C. M. O. Nwaiwu

Modelling Flow Behavior of Gas Leakage from Buried Pipelineu pp. 1343-1348

Petro Ndalila, Yuxing Li and Cuiwei Liu

Multi-Modal Natural Frequency Response of Utility Transmission Tapered Wood Poles Under Various Soil Foundation Conditions pp. 1349-1352

Ramani Ayakannu and Zia Razzaq

Evaluation of the Behavior of The Physical and Mechanical Properties of Green Concrete Exposed to Magnesium Sulfate pp. 1353-1356

Laura Landa-Ruiz, Hilda Ariza-Figueroa, Griselda Santiago-Hurtado, Victor Moreno-Landeros, Raúl Alberto López Meraz, Rafael Villegas-Apaez, Sabino Márquez-Montero, René Croche and Miguel Angel Baltazar-Zamora

Effect of Water Injection into Aero-derivative Gas Turbine Combustors on NOx Reduction pp. 1357-1359

Roupa Agbadede and Isaiah Allison

Preliminary Re-design of an Axial Turbine in an Existing Engine to Meet the Increased Load Demand pp. 1360-1364

Roupa Agbadede, Dennis Uwakwe and Isaiah Allison

Maximally Flat IIR Fullband Differentiators with Flat Group Delay Responses pp. 1365-1367

Slavisa Ilić, Ahmad Mohammed Salih, Majid Hamid Abdullah and Dragiša Milić

Assessment of Efficiency and Sustainability of Housing Plan in Khartoum pp. 1368-1371

Abdelrahim Elhag

Next Steps Might Be Considered by Joe Biden for the Development of International Trade Law pp. 1372-1375

Md. Habib Alam

Maintenance Management Regime for Off-Grid Solar PV Renewable Energy System in Nigeria pp. 1376-1382

Zacchaeus A. Adetona, Joel Ogunyemi and Irmiya Bitrus

The Impact of Covid-19 Pandemic on Water-Health-Food-Economy Nexus and Sustainable Development in Developing Countries pp. 1383-1388

W. K. Joshua

Electrochemical Evaluation of Chrysin Flavonoid as Corrosion Inhibitor for Mild Steel in Sulphuric Acid Solution pp. 1389-1393

M. Y. Díaz, M. G. Valladares, E. C. Menchaca and J. Uruchurtu

Leaching Batch Test and XRD Characterized OPC Treated Lead Contaminated Soil pp. 1394-1397

Mabrouk Hassan Arhoma

2020, month October, vol 5

Aliphatic Hydrocarbons Extraction from Oily Sludge using Kerosene pp. 1137-1141

Ndjeumi Chrisdel Chancelice, Ze Bilo’o Philémon, Mouthe Anombogo Ghislain Arnaud and Ngassoum Martin Benoït

Estimation of Aquifer Protective Capacity, Soil Corrosivity and Dar-Zarrouk Parameters in Kaura Area of Kaduna State, Nigeria pp. 1142-1151

Isaac O. Olaniyan

The Impact of Guinea Corn Husk Ash as an Admixture for Crack Control in Concrete pp. 1152-1159

Peter I. Aburime, Emmanuel E. Ndububa and David O. Kpue

Optimization of an Autonomous Hybrid Power System for an Academic Institution pp. 1160-1167

Usman Alhaji Dodo, Evans Chinemezu Ashigwuike, Najashi Barau Gafai, Emmanuel Majiyebo Eronu, Abdullahi Yusuf Sada and Mustapha Alhaji Dodo

Smart Intrusion Detection System Comprised of Machine Learning and Deep Learning pp. 1168-1173

Shah Md. Istiaque, Asif Iqbal Khan and Sajjad Waheed

Development of African Locust Bean (Parkia Biglobosa) Depulping Machine pp. 1174-1178

W. A. Akinfiresoye, A. A. Akintade and S. A. Fasoyin

A Fuzzy Inventory Model Considering Imperfect Quality Items with Receiving Reparative Batch and Order pp. 1179-1185

Hesamoddin Tahami and Hengameh Fakhravar

Emotional Preferences Towards E-Learning Based on Analytic Hierarchy Process and Kansei for Decision Making pp. 1186-1190

Ana Hadiana

The Contribution to the Development of a Two-Dimensional Asymptotic Theory of the Three-Point Bending Behaviour of Multi-Layered Beams: Applications to Orthotropic Phase Sandwich Beams pp. 1191-1198

A. D. Pagui, A. E. Foudjet, J. S. T. Mabekou, T. R. S. N. Ekoume and P. K. Talla

Experimental Study of Mean Flow Characteristics in the Near Field of Wedge-Shaped Swirling Jets pp. 1199-1203

Md. Mosharrof Hossain, Muhammed Hasnain Kabir Nayeem and Dr. Md Abu Taher Ali

4D Printing and Characterization of Shape Memory Polymer (SMP) Based Smart Gripper pp. 1204-1211

Francis Irungu Maina, Nahashon Osinde, Japheth Ka’pesha Odira, Patrick Kariuki Wanjiru and Margaret Wanjiku Mwangi

The Illusion of Quantum Mechanical Probability Waves pp. 1212-1224

Wim Vegt

Automated Mobile Telecom Cell Sites System pp. 1225-1230

Ehigiator Iyobor Egho-Promise and Bamidele Ola

The Physical Properties and Geochemical of Clay from the Bestari Jaya, Kuala Selangor, Selangor, Malaysia for Potential Usage pp. 1231-1236

M. R. Umor, A. Hussin and N. Muda

Conceptions of The Baccalaureate Students of The Eastern Region of Morocco on the Environment and Sustainable Development pp. 1235-1242

Abdelkader Sbai, Abdeljabbar El Mediouni, Hassan Hakim and Said Mentak

Influence of Bracing on Buckling Strength of Pultruded Glass Fiber Reinforced Polymer Frames pp. 1237-1239

Mojtaba B. Sirjani and Zia Razzaq

5G Mobile Technologies and Early 6G Viewpoints pp. 1240-1246

Ivan Petrov and Toni Janevski

Quantification by Powder X-ray Diffraction of Metal Oxides Segregation During Formation of Layered Double Hydroxides pp. 1243-1248

A. Misol, A. Jiménez, A. Morato, F. M. Labajos and V. Rives

A Partial Environmental Engineering Management Study of Open Dump Site and Its Impact on Land and Water pp. 1247-1234

Kelechi Uchenna Ugoji, Abba Ibim Green, Ruth Ngozi Nmoye and Ndukam Billy Igbere

Motion Prediction of Underwater Sensors pp. 1249-1252

Abdulrzaq Naji Jamjoom, Ramzi Othman and Khalid H. Almitani

Development of Radio Propagation Path Loss Model for Kaduna Town, Nigeria Using GMDH Algorithm pp. 1253-1259

Z. M. Abdullahi, O. U. Okereke, A. I. Isa and A. Ozovehe

Measurement of Energy Production from Biogas: Evidence from the Wastewater Treatment Plant in Durres pp. 1260-1262

Stela Sefa, Tania Floqi and Julian Sefa

Associations between Body Mass Index, Sleep Duration, and Reported Snoring and Sleepiness Symptoms, By Age Stratification pp. 1263-1268

David W. Lin and Weijie V. Lin

Prediction of Formation Damage, Fluid Loss and Rheological Properties of Water Based Mud with Corn Cob pp. 1269-1273

Godwin Chukwuma Jacob Nmegbu, Bright Bariakpoa Kinate and Bari-Agara Bekee

Experimental Investigation of a Prandtl Probe Fabricated Using Desktop Stereolithography Technology pp. 1274-1280

Alfred Gift Mwachugha, Jean Byiringiro, Harrison Ngetha, Thomas Carolus and Kathrin Stahl

Trend of Extreme Precipitations Indices in West-central Côte d’Ivoire: Case of the Lobo Watershed pp. 1281-1287

F. B. Allechy, M. Youan Ta, V. H. N’Guessan Bi, F. A. Yapi, A. B. Koné and A. Kouadio

The Effect of Nanoparticles in Single Lap Joints Studied by Numerical Analyses pp. 1288-1293

Panagiotis J. Charitidis

Novel Methods Transcending the Standard Model of Physics pp. 1294-1296

Ulrich Bruchholz and Horst Eckardt

2020, month September, vol 5

Modelling and Optimization of Ultrasound Assisted Extraction of Polyphenols Using Response Surface Methodology pp. 1004-1012

Junior Franck Ekorong Akouan Anta, Biloa Dorothée Marcelle, Bruno Fabrice Siewe and Raghavarao K. S. M. S.

Analysis and Design of Steel a Floating Pontoon Jetty for Use in the Coastal Waters of Nigeria pp. 1013-1021

Icho Seimokomoh Igwe and Tolumoye John Ajoko

An Indirect Estimator of Speed for a DC Motor Embedded in an Automotive Combustion Engine pp. 1022-1026

Paulo Bressan and Cesar Da Costa

The Assessment of the suitability of reconfigurable design through simulation and decision trees pp. 1027-1030

Ricardo Irving Ramirez Guzman, Mario Luis Chew Hernández, Mtro. Leopoldo Viveros Rosas and Ricardo Rodríguez Figueroa

Repurposing Hydroxychloroquine as a Model Drug for the Prediction of Potential SARS-CoV-2 Inhibitor pp. 1031-1036

K. K. Igwe, O. V. Ikpeazu, F. J. Amaku and I. E. Otuokere

Using the Pharmacophoric features of Azithromycin to design potential SARS-CoV-2 inhibitor pp. 1037-1042

O. V. Ikpeazu, F. J. Amaku, I. E. Otuokere and K. K. Igwe

Design of Potential SARS-CoV-2 Inhibitor pp. 1043-1048

F. J. Amaku, I. E. Otuokere, K. K. Igwe and O. V. Ikpeazu

Causes of Delayed Payment in Construction Project in Nigeria pp. 1049-1053

Onyekachukwu G. Odenigbo, Koleola T Odusami, Kevin C. Okolie and Vincent C. Okafor

The Impact of Node Density and Buffer Size on DTN Routing Protocols with Energy Efficiency pp. 1054-1061

Md. Khalid Mahbub Khan, Kawsaruzzaman Kawsaruzzaman, Md. Mahbubur Rahman, Al- Imtiaz and Al- Imtiaz

Mineralogical and Geotechnical Properties of Clay Minerals in Northern Borno, Nigeria pp. 1062-1068

Fatimoh Dupe Adams, Shettima Bukar, Mohammed Bukar and B. A. Umdagas

Optimal Aqueous Extraction Conditions as A Green Technique for Recovery of Phenolic Antioxidants from Robusta Dried Coffee Pulp pp. 1069-1074

Thy Minh Kieu Tran, Taiwo Akanbi, Timothy Kirkman, Minh Huu Nguyen and Quan Van Vuong

Control of the Water Quality of Antsidihy Lake Located in the District of Nosy-Be, Diana Region (Madagascar) pp. 1075-1080

Théophile Razafitsiferana and Bruno Razanamparany

Review of Nigeria’s Petroleum Industry Bill (PIB) pp. 1081-1084

Azubuike Hope Amadi, Victor D. Ola and John O. Ayoola

Normality Testing for Vectors on Perceptron Layers pp. 1085-1088

Youmna Shawki Karaki, Halina Kaubasa and Nick Ivanov

Wear Resistance Improvement of Copper Alloys Using a Thermochemically Obtained Zinc-Rich Coating pp. 1089-1096

Omar Alvarez, Carlos Valdés, Arturo Barba, Rafael González, Raúl Valdéz, Celso Cruz, Dayi Gilberto Agredo, Alba Covelo and Miguel Ángel Hernández

Diagnosis of Head and Neck Cancer in Developing Countries Using a Stacked Ensemble Model pp. 1097-1101

Folake Akinbohun, Ambrose Akinbohun, Adekunle Daniel and Oghenerukevwe Elohor Ojajuni

Optimisation of Grease Dispensation for Heavy-duty Mining Excavators pp. 1102-1109

Anthony Simons, Richard Wireko and Cyrus Addy

Influence of the Drop Volume and Applied Magnetic Field on the Wetting Features of Water-based Ferrofluids pp. 1110-1116

Barenten Suciu

Design and Simulation of Air Conditioning System in a Large Auditorium Based on Computational Fluid Dynamics pp. 1117-1123

Rahaman Abu, K. A. Oladejo, A. O. Popoola, K. T. Oriolowo and K. M. Odunfa

Rain–Induced Flood Prediction for Niger Delta Sub-Region of Nigeria Using Neural Networks pp. 1124-1130

Ledisi Giok Kabari and Young Claudius Mazi

Effect of Sulfur Levels and Number of Cuttings on Characteristics and the Yield of Barley (Hordeum vulgaire L) pp. 1131-1134

Ahmed Ali Al-Karkhi

Mathematics for the Imaginary Number i pp. 1135-1136

Andri Lopez

Evaluation and Modelling of a Low Budget Hall Effect Based Flow-Rate Sensor using Adaptive Calibration Paradigm

Emmanuel M. Eronu and Moses Odiagbe

2020, month August, vol 5

Analysis on Geometry of Fluid Flow Manifold in Direct Methanol Fuel Cell pp. 822-827

Ramasamy Govindarasu, R. Kavitha, M. Nambiraj, R. Praveen Kumaar and N. N. Harish Kumar

Normal Electrochemical Deposition NiFe pp. 828-834

Robert Dmitrievich Tikhonov

Design, Fabrication and Performance Evaluation of a Shell and Tube Heat Exchanger for Practical Application pp. 835-845

Bashiru Abdulmumuni, Adedeji Mathew Ayoade, Ologunye Opeyemi Buhari, Azeez Rasheed Olatunde and Fanifosi Johnson Olaniyi

The Real Un?verse Model pp. 846-848

Mammadov Sabir Ahmedovich

Skeleton based Human Action Recognition using a Structured-Tree Neural Network pp. 849-854

Muhammad Sajid Khan, Andrew Ware, Misha Karim, Nisar Bahoo and Muhammad Junaid Khalid

The Neutron Meta-Particles and their Decay as Viewed in the Planck Vacuum Theory pp. 855-857

William C. Daywitt

Risk Analysis of Associated Gas Utilization in Power Plants pp. 858-863

Isaiah Allison and Roupa Agbadede

Modelling the Business-As-Usual Energy Scenario for the Albanian Household Sector pp. 864-869

Altin Maraj

Incised Valley Depositional System of the Cretaceous Yolde Formation of the Gongola Sub-basin Northern Benue Trough N.E. Nigeria pp. 870-876

Shettima Bukar, Mohammed Bukar, Asabe Kuku, Bintu Shettima and Ishaku H. Kamale

Optimization of Extraction Parameters of Polyphenols from Mango Seed Kernel through Response Surface Methodology pp. 877-883

Junior Franck Ekorong Akouan Anta, Dorothée Marcelle Biloa and K.S.M.S. Raghavarao

A Comparison on Impact of HIV/AIDS Patients Characteristics On Their Blood Pressure in Nigeria pp. 884-890

Chinazo Anthonia Ezeokeke and Cecilia Nchedo Okoli

Transformer Differential Protection pp. 891-898

Aniagboso John Onah and Edwin Ejiofor Ezema

The Cognitive Radio and Internet of Things pp. 899-903

Ammar Abdul-Hamed Khader and Zozan Azeez Ayoub

Introduction into Extra Geometry of the Three-Dimensional Space II pp. 904-914

Istvan Szalay and Balazs Szalay

MgO Cluster Models for Capture CO2 Molecule pp. 915-921

Zinab Ibrahim Alhony and Fathi Hassan Bawa

Robust Controller for Kaplan Hydroturbine Governor System Based on Fast Terminal Sliding Mode Control (FTSMC) pp. 922-929

Aime Herve Samba, Aurelien Yeremou Tamtsia, Leandre Nneme Nneme and Korassaï Korassaï

Robust Adaptative Generalized Predictive Control with Multiple Reference Model for Frequency Control In Hydroelectric Power Plants pp. 930-937

Korassaï Korassaï, Aurelien Tamtsia Yeremou and Haman Djalo

Waste Management of Spent Petroleum Refinery Catalyst pp. 938-947

Isam Al-Zubaidi and Congning Yang

Evaluating Productivity Management of Materials Handling System at Mempeasem Gold Mine pp. 948-954

Desmond B. Munyadzwe, Nonduduzo B. Mamba and Raymond Sogna Suglo

Finite Element Analysis of Fiber Cement Corrugated Roofing Sheet under Bending pp. 955-957

Vincent Chinedum Okafor, Peter E. Ogunoh and Ogochukwu C. Okechukwu

Comparison of Hidden Markov Model and Recurrent Neural Network in Automatic Speech Recognition pp. 958-965

Akshay Madhav Deshmukh

Comparative Analysis of Fuzzy Inference System (FIS) And Adaptive Neuro-Fuzzy Inference System (ANFIS) Methods in the Classification and Location of High Impedance Faults on Distribution System pp. 966-969

Nseobong I. Okpura, E. N. C. Okafor and Kufre M. Udofia

Sustainability and Environmental Awareness in the Ceramic Industry pp. 970-979

Anita Terjek and Annamária Dudás

A Parametric Model for Accident Prediction Along Ado Ekiti – Ikole Ekiti Road, Ekiti State, Nigeria pp. 980-985

Olumuyiwa Samson Aderinola

Experimental Research of Induction Heating in Inner Hollow of Cylindrical Solenoid pp. 986-989

Viktoriia Strelnikova

Mixed Finite Element Matrix for Plate Bending Analysis Using Weighted-Residual Integral and Weak Formulation pp. 990-999

Abdarrhim Mohammed Ahmed and Saleh Y. Barony

Women’s Behavioral Health in Relation to Premenstrual Syndrome pp. 1000-1003

Rabail Javed, Rukhama Haq, Dania Mubashir, Fatima Nadeem, Nadeem Ahmed and Shagufta Naz

2020, month July, vol 5

Four-Poles Parameter of an Elliptical Cavity Having the Outlet on the Body pp. 763-766

Yuya Nishimura and Sohei Nishimura

Using Hysteresis Band Method for the Control of Three-Phase STATCOM Connected to a Transport Network pp. 767-772

Ndjiya Ngasop, Asnang David and Haman Djalo

A Review of Probabilistic Techniques Used for Web browsers’ Caching pp. 773-780

Abdul Sattar Kakar and Muhammad Sadiq Rohie

Application of Blockchain in KYC Compliance pp. 781-784

Shashank R. B., Chirag Chhabra and Nagaraj G. Cholli

Security Control Assessment of Supervisory Control and Data Acquisition for Power Utilities in Tanzania pp. 785-789

Job Asheri Chaula and Godfrey Weston Luwemba

Web-Based Interactive Health Record System (WIHRS) pp. 790-794

Folake Akinbohun, Ambrose Akinbohun, Omoniyi Akintunde Ojo and Babalola Daodu

Spatial Limit of CFD Model at Nanometer Scale Geometry: Part I: Capillary Flow pp. 795-799

Simon Mark and Harry Boyer

Modelling of Ventilation Rate and Heating Rate using Multi-Module Fuzzy Control System for A Greenhouse pp. 800-806

Jamilu Yau, Ji JianWei, Hui Wang, Olubakinde Eniola and Folahan Peter Ibitoye

A Multimodal Traveller Information System using both Web-Based Design Program and Traffic Analysis for Akure Metropolis pp. 807-812

Olumuyiwa Samson Aderinola, Abdulrahman Adewalee Laoye and Adebayo I. Akinade

Free Induction Decay and Spin Echo Signals from Spin Triplet States of Axially Asymmetric Objects in Single Crystals in Zero Constant Magnetic Field pp. 813-821

Nathalie P. Fokina and Maia O. Elizbarashvili

2020, month June, vol 5

Rogowski Coils for Design of Energy Meters for Nigeria Power Market pp. 626-631

John Paul I. Iloh

The World Beyond Black Holes pp. 632-645

Wim Vegt

Development, Kinematic Modeling and Analysis of 3 (DoF) Pneumatic Gantry Robot pp. 646-650

Awad Eisa G. Mohamed and Abuobeida Mohammed Elhassan

Machine learning Clustering Algorithms Based on the DEA Optimization Approach for Banking System in Developing Countries pp. 651-658

Mirpouya Mirmozaffari, Azam Boskabadi, Gohar Azeem, Reza Massah, Elahe Boskabadi, Hamidreza Ahady Dolatsara and Ata Liravian

Review of Multilevel Inverters and Their Control Techniques pp. 659-664

Ibrahim Emmanuel Tashiwa, Gyang Davon Dung and Benson Stephen Adole

Impacts of Placement of Wind Turbine Generators on IEEE 13 Node Radial Test Feeder In-Line Transformer Fuse-Fuse Protection Coordination pp. 665-674

Kemei Peter Kirui, David K. Murage and Peter K. Kihato

Uncertainty Approaches for Solving Generalized Machine Maintenance Problem pp. 675-682

Samir Abdou Abass, Asmaa S. Abdallah, Marwa Shehata Elsayed and Eman Massoud Ahmed

Surface Roughness Model when Hole Turning SAE 420 Steel pp. 683-688

Ky Hong Le

Finite Element Analysis of Key Influence Parameters in Reinforced Concrete Exterior Beam Column Connection subjected to Lateral Loading pp. 689-697

Gemechu Abdissa Diro and Worku Feromsa Kabeta

Analysis of DVB-T2 and LTE Networks Co-Existence in the Digital Dividend Band in Nigeria pp. 698-701

Evans C. Ashigwuike, Sadiq A. Umar and Stephen O. Okpanachi Moses

An Experimental Investigation of Dynamic Properties of Fiber-Reinforced Tire-Derived Lightweight-Aggregate Concrete pp. 702-707

Fariborz M. Tehrani, Nazmieh A. Masswadi, Nathan M. Miller and Arezoo Sadrinezhad

Comparative Effectiveness of Flotation Technique at Varying Conditions for Beneficiation of Itakpe and Agbaja Iron Ores pp. 708-714

Serah Akande, Oladunni O. Alabi, E. O. Ajaka and Temitope Amos Olatunji

Developing A Seizure Prediction Algorithm for A Non-Invasive Neuromodulator pp. 715-724

Mahnaz Asgharpour, Mehdi Sedighi and Mohammad Reza Jahed Motlagh

A GSM Based Automatic Energy Meter Reading and Billing System pp. 725-730

Mohammad Golam Mortuza, Zia Uddin Ahmed, Hassan Jaki, Md. Razu Ahmed, Mohammed Jashim Uddin and Md. Humayun Kabir

Numerical Analysis of Adhesive Joints with Bi-Layered Adherends pp. 731-735

Ahmed Hasan Sayegh, Khalid Almitani and Ramzi Othman

An Inquisition on the Combined Effects of Ambient Temperature and Relative Humidity on The Performance of a Uniform Speed Single Shaft Gas Turbine in Tropical Monsoon Climate, using GPAL pp. 736-744

Abel Edeowede Abhulimen, Mathias Usman Bonet, Olukayedo Oyekunle, Nnorom Achara and Wunuken Carlos Solomon

A New Method of Calculating the Attainable Life and Reliability in Aerospace Bearings pp. 745-750

Peter Gloeckner and W. Sebald

Sensitivity Based Approach for the Optimal Sizing and Allocation of Distributed Generation in a Radial Network pp. 751-756

Paul C. Maduforo, Jonas N. Emechebe, Emmanuel M. Eronu and Stephen Adole Benson

Analysis of the Jet Engine Propulsion and Thrust relative to the use of the Water Molecule Power Reactor System pp. 757-762

Jeremy Guimbaolibot Ecle, Fedeliza O. Abrera, Arvin Anthony S. Araneta, Cherlowen A. Bolito, Archibald M. Duran, Loren Rose L. Alforte, Arnold R. Balano and Archibal D. Ranido

2020, month May, vol 5

The The Fine Structure Constant and Radiative Corrections for the Electron and Positron Cores as Viewed in the Planck Vacuum Theory pp. 535-537

William C. Daywitt

Introduction into the Extra Geometry of the Three–Dimensional Space I pp. 538-544

Istvan Szalay and B. Szalay

Environmental Impact Assessment of Ala-River Akure, Ondo State Nigeria pp. 545-549

Victor Ayodele Ijaware

Assessment of Spatial Prediction Techniques Accuracy for Elevation Determination in Akure South Local Government, Ondo State pp. 550-553

Victor Ayodele Ijaware and Adebayo T. Adeboye

A Comparative Analysis of the Rebound Hammer and Pullout as Non-Destructive Method in Testing Concrete pp. 554-558

Festus Chukwudi Onyeka

New Thermodynamics: Rethinking the Science of Climate Change pp. 559-564

Kent W. Mayhew

Experimental Validation of a Forced-Circulation Solar Water Heating System Equipped with Flat-Plate Solar Collectors – Case Study pp. 565-570

Altin Maraj

Smart Home: An Empirical Analysis of Communication Technological Challenges pp. 571-575

Md. Razu Ahmed, Mohammad Osiur Rahman and Md. Jiabul Hoque

The Synthesis of Blockchain, Artificial Intelligence and Internet of Things pp. 588-593

Brian Parker and Christian Bach

A Study on Roughness of Workpiece Surface When Centreless Grinding of SAE1045 Steel pp. 594-598

Le Hong Ky

Simplified Rate Expression for Palm Kernel Oil (PKO) and Methanol Alkali Catalyzed Transesterification Reaction pp. 599-606

A. D. Okewale, Millionaire Freeborn Nestor Abowei, F. O. Agbogun and C. N. Owabor

Evaluation of Strength Properties of Subgrade Materials Stabilized with Bio-Enzyme pp. 607-610

Bamidele S. Raheem, G. F. Oladiran, D. A. Oke and S. A. Musa

Smart attendance system using Convolution Neural Network and Image Processing pp. 611-616

Senigala Kuruba ChayaDevi and Vamsi Agnihotram

Development of a Hammer Mill with Double Sieving Screens pp. 617-621

Oluyemisi Adebanjo Ojomo and A. J. Fawohunre

Froth Flotation Beneficiation a Sure Way to Value Addition to Arufu (Nigeria) Zinc Ore Towards Smelting Grade Concentrate Production pp. 622-625

Oladunni Oyelola Alabi, Olanrewaju Rotimi Bodede and Taiwo Paul Popoola

2020, month April, vol 5

Study A Public Key in RSA Algorithm pp. 395-398

Taleb Samad Obaid

The Seven-Dimensional Spacetime in the Planck Vacuum Theory and the Structure of the Electron and Proton Cores pp. 399-402

William C. Daywitt

Development of the Instrumentation Unit of a Motorized Precision Planter pp. 403-407

Babatunde Oluwamayokun Soyoye

Impact of Cash Crops (Cocoa, Rubber Tree) on the Farmers’ Life Quality in Abengourou Department (East of Côte d’Ivoire) pp. 408-414

Innocent Koffi, H. Dibi N’Da, Kouakou G. C. Douffi, Koffi F. Kouamé and Brou E. Koffi

Influence of Performance Appraisal on Performance of Civil Servants in Kenya pp. 415-420

Yahya Idriss Elhadi

Determination of Temperature-Moisture Relationship by Linear Regression Models on Masonry and Floor, Kruja, Albania pp. 421-428

Klodjan Anesti Xhexhi, Andrea Maliqari and Paul Louis Meunier

Recycled ABS Polymer Doped with Outdated Lansoprazole as a Corrosion Protection Composite Coating for Mild Steel in Chloride Solution pp. 429-435

Sandra Viveros, Carmina Menchaca, Miguel A. Hernandez, Alba Covelo and Jorge Uruchurtu

Solar-Energy Innovative and Sustainable Solution for Freshwater and Food Production for Lake Titicaca Islands pp. 436-442

Raed Bashitialshaaer

The Effect of Partial Replacement of Polymethyl Methacrylate(PMMA) on the Compressive and Flexural Strength of Ordinary Cement Mortar pp. 443-447

Mustafa Kadhim Rustum and Khalid M. Eweed

A Review of the High-speed Permanent Magnet Rotor Stress Analysis used for Automotive Air-handling Machines pp. 448-456

Levi Ryan Mallin and Simon Mark Barrans

Fresh and Hardened Properties of Styrene Butadiene Rubber (SBR) Modified Concrete pp. 457-461

Muhammad Ahmed Qadri, Huzaifah Hameed and Osama Bhutta

Pressure Control of HVAC System for Corona Virus pp. 462-468

Samuel W. Chung and Jeong Je Jo

Towards Sustainable Composite Building Material: Integrating Lime with Slag for reduced mortar Thermal Conductivity pp. 469-474

Sule Adeniyi Olaniyan

Heat Transfer Augmentation pp. 475-478

Ifeoma B. Asianuaba

Comparative Analysis of Water Drive, Gas Drive and Natural Drive Mechanism for Oil Production using Alwyn North Field as a Case Study pp. 479-484

Azubuike Hope Amadi, Okeke Raphael and Orisa F. Ebube

Archery Bow Design Equation pp. 485-488

Rahul Verma

Application of Machine Learning for Diagnosis of Head and Neck Cancer in Primary Healthcare Organisation pp. 489-493

Olatunbosun Olabode, Adebayo O. Adetunmbi, Folake Akinbohun and Ambrose Akinbohun

Tools for Risk Management of Technical Facilities Operation pp. 494-500

Dana Prochazkova and Jan Prochazka

Moisture Sorption Studies of Kamsa pp. 501-509

Hauwa L. Yusuf, Balarabe B. Isma’il, Amin Oderaa Igwegbe, Paul Y. Idakwo and Hadiza K. Bako

An Automated Greenhouse Monitoring and Controlling System using Sensors and Solar Power pp. 510-515

Jiabul Hoque Md, Md. Razu Ahmed and Saif Hannan

Threshold Segmentation and Watershed Segmentation Algorithm for Brain Tumor Detection using Support Vector Machine pp. 516-519

Santhosh Kumar Hatcholli Seere and K. Karibasappa

Analysis of Hydrate Formation Temperature and Water Dew Point of Processed Crude Oil and Gas using Unism Simulator pp. 527-530

Azubuike Hope Amadi and Chukwuebuka E. Okafor

Moment and Stress Analysis Solutions of Clamped Rectangular Thick Plate pp. 531-534

O. M. Ibearugbulem and Festus Chukwudi Onyeka

2020, month March, vol 5

Vowels and Prosody Contribution in Neural Network Based Voice Conversion Algorithm with Noisy Training Data pp. 229-233

Olaide Ayodeji Agbolade

Disaster Risk in Central Asia: Socio-Economic Vulnerability Context and Pilot-Study of Multi-Risk Assessment in a Remote Mountain Area of Kyrgyz Republic pp. 234-244

Ruslan Umaraliev, Rui Moura, Hans-Balder Havenith, Fernando Almeida and Abdurashit G. Nizamiev

Design and Cost Optimization of Heat Exchangers Network System in a Typical Brewery Plant pp. 245-251

Shadrack Uzoma Mathew and Tamzor Lebari Aban

Evaluation of the Current Land Registration System in the Gaza Strip pp. 252-258

Maher A. El-Hallaq and Mahmoud I. El-Sheikh Eid

Electrochemical Evaluation of Galvanized Steel and AISI 1018 as Reinforcement in a Soil Type MH pp. 259-263

Miguel Angel Baltazar-Zamora, Laura Landa-Ruiz, Yazmin Rivera and René Croche

New Thermodynamics: Temperature, Sun’s Insolation, Thermal, and Blackbody Radiation pp. 264-270

Kent W. Mayhew

The Possibilities for Improving Energy Efficiency at Water Utility Sector pp. 271-274

Gjelosh Gjon Vataj and Zenel Sejfijaj

Model for Estimating Travel Time on Dynamic Highway Networks in Akure, Ondo State Nigeria pp. 275-281

Onyemaechi John Nnamani, Victor Ayodele Ijaware, Joseph Olalekan Olusina and Timothy Oluwadare Idowu

Fractal Dimension Analysis of Aluminum Corrosion Roughness by Electrochemical and Optical Methods pp. 282-291

Elsa Carmina Menchaca-Campos, Erika Rocio Villalba-Enciso, Victor Juarez-Nuñez, Miriam Flores-Dominguez, Darwin Mayorga-Cruz, Rene Guardian Tapia and Jorge Uruchurtu-Chavarin

Study of Metrics that Could be Considered as Inputs to an Intelligent System for Diagnosing Schizophrenia based on an Electroencephalogram (EEG) pp. 292-296

Pélagie Flore Temgoua Nanfack and Angouah Massaga Morel Junior

Anomalous Activity Detection in Videos Using Increment Learning pp. 297-300

Prerna Didwania and Vandana Jagtap

A CPW - Fed Microstrip Monopole Antenna Employing Inverted Quad L Shaped Stubs with Symmetrical Slotted Rectangular Ring Ground Planes for GPS/PCS/UMTS and UWB Applications pp. 301-303

G. Viswanadh Raviteja, T. Sarath, M. Vinethra Naidu, S. Baka Vikash and K. Sudheer

Engine Speed and Load on the Sealing Capacity of a Piston Ring-Pack pp. 304-313

Erjon Selmani and Arian Bisha

Study on the Spatial Radiation Characteristic by Adjusting the Violin Sound Post pp. 314-319

Yuya Nishimura, Rin Ema Minami and Sohei Nishimura

Impact of Operational Research on Performance Control of a Project in the Oil and Gas Industry pp. 320-326

Ionut Nica

Gain and Bandwidth Considerations for Microstrip Patch Antenna Employing U and Quad L shaped Slots with DGS and Parasitic Elements for WiMax / WiFi Applications pp. 327-330

G. Viswanadh Raviteja, B. T. V Madhan, M. Kshetra Sree, N. Avinash and P. R. S. Naga Surya

Biochar and Other Organic Amendments Improve the Physicochemical Properties of Soil in Highly Degraded Habitat pp. 331-338

Alemayehu Getahun, Diriba Muleta, Fassil Assefa, Solomon Kiros and Mariangela Hungria

Sleep Apnoea Disorder pp. 339-342

Aishwarya Deepak Raut and Bharati Dixit

Mobile Phone Radiofrequency Radiation Assessment Based on Call-Related Factors and Physical Condition from Selected Mobile Phones pp. 343-347

Ilesanmi Banjo Oluwafemi and Olusegun Johnson Adeoye

Energy and Economic Estimation for a Passive Solar Water Heating System Equipped with a Heat Pipe Evacuated Tube Collector pp. 348-352

Altin Maraj

Electrochemical Evaluation of AISI 304 SS and Galvanized Steel in Ternary Ecological Concrete based on Sugar Cane Bagasse Ash and Silica Fume (SCBA-SF) exposed to Na2SO4 pp. 353-357

Miguel Angel Baltazar-Zamora, Hilda Ariza-Figueroa, Laura Landa-Ruiz and René Croche

Height Adjustable Triangular (HAT) Window Function for Impulse Response Modification of Signal Processing Systems pp. 358-366

C. B. Mbachu

Height Adjustable Sine (HAS) Window Function for Impulse Response Modification of Signal Processing Systems pp. 367-374

C. B. Mbachu

Technological Review of Tubular Daylight Guide System from 1982 to 2020 pp. 375-386

Bruno Malet-Damour, Dimitri Bigot and Harry Boyer

A Model Approach to Analytically Identify Stuck Pipe and Its Mechanism in Wellbore pp. 387-394

Boniface A. Oriji and Iribhogbe Silas Aire

2020, month February, vol 5

Protonic Magnetic Resonance Properties of the Hard Rocks Fracture Zones in the Department of Donga pp. 112-117

Euloge Nicaise Yalo, Bertrand Houngnigbo Akokponhoué and Marc Youan Ta

Camshaftless Technology on Internal Engines pp. 118-123

Pham Van Viet

Comparison of a Tannery that Using the Conventional Treatment of Waste Water and That Using the Recycling Method pp. 124-126

Rehab Ahmed Salman, G. A. Gasmelseed and R. S. Hassan

Corrosion of AISI 316 Stainless Steel Embedded in Sustainable Concrete made with Sugar Cane Bagasse Ash (SCBA) Exposed to Marine Environment pp. 127-131

Miguel Angel Baltazar-Zamora, Abigail Landa-Sánchez, Laura Landa-Ruiz, Hilda Ariza-Figueroa, Pedro Gallego-Quintana, Aldo Ramírez-García, René Croche and Sabino Márquez-Montero

Testing Causality and Cointegration of Savings and Investment In Ghana pp. 132-137

Henry Otoo, Sampson Takyi Appiah, Albert Buabeng and M. Apodei

A Study on Tensile Strengths of Randomly Oriented Coir/Plantain Hybrid Fiber Reinforced Polyester (CPFRP) Composites pp. 138-145

Christian Ebele Chukwunyelu, A. W. Nwosu and Innocent Tochukwu Uzoghelu

A Study on Particulate Emission Characteristics of Diesel Engine using a Mixture of Commercial Diesel and Biodiesel Based Palm-Oil pp. 146-150

Pham Van Viet

A Study on Technical and PM Emission Characteristics on Diesel Engines using Biodiesel Based Palm Oil pp. 151-154

Pham Van Viet

Opportunity and Challenge of Vietnamese Fleets in the Consideration of International Factors pp. 155-159

Thieu Sang Ha, Phuoc Quy Phong Nguyen and Thi Cam Huyen Nguyen

Affecting Factors to the Efficiency in the Container Shipping pp. 160-164

Manh Hung Nguyen, Nghia Chung and Thieu Sang Ha

Primal-Dual Interior-Point Technique for Optimisation of 330kV Power System on One Variable pp. 165-170

Chiristian I. Obinwa, C. A. Nwabueze and C. B. Mbachu

Characterizing Computation in Artificial Neural Networks by their Diclique Covers and Forman-Ricci Curvatures pp. 171-177

Allen D. Parks

Airborne System for Pipeline Surveillance Using an Unmanned Aerial Vehicle pp. 178-182

Mbadiwe Samuel Benyeogor, Adeboye Olatunbosun and Sushant Kumar

Machine Learning Algorithmic Study of the Naira Exchange Rate pp. 183-186

Ledisi Giok Kabari, Marcus B. Chigoziri and Joseph Eneotu

New Thermodynamics: Inefficiency of a Piston-Cylinder pp. 187-191

Kent W. Mayhew

Optimizing Deep Convolutional Neural Network for Facial Expression Recognition pp. 192-195

Umesh B. Chavan and Dinesh Kulkarni

The Analysis of Bending Stiffness and Strength of Glue Laminated Nigerian Timber pp. 196-200

Kingsley Kenechukwu Okafor and Celestine Akaolisa Ezeagu

Insert Switches Inside to Increase Battery Lifespan pp. 201-209

Christophe Savard, Pascal Venet, Eric Niel, Laurent Pietrac and Ali Sari

Computation of the Negative Damping Associated to the Hunting Motion of the Railway Wheelset, without Using Geometrical or Tribological Restrictions into the Model pp. 210-217

Barenten Suciu

Intensive Improvement of Cementite Synthesis pp. 218-220

Amir Peyman Soleymani, Masoud Panjepour and Mahmood Meratian

Diagnosing Diabetes Using Artificial Neural Networks pp. 221-224

Joy Oyinye Orukwo and Ledisi Giok Kabari

A Mathematical Model for Predicting the Winnowing Efficiency of Bambara Groundnut Sheller pp. 225-228

Inimfon Samuel Ossom, Akindele Folarin Alonge, Kingsley Charles Umani and Edidiong J. Bassey

2020, month January, vol 5

Use of Non-Hazardous Solid Waste as Alternative Fuels in Cement Manufacturing Process pp. 1-7

Ghizlane Bouabid, Fouzia Byoud, Nisrine Benzbiria, Driss Nahya and Mohammed Azzi

Computer Simulation Models for Profit Maximisation in a Paint Production Company pp. 8-11

Tobinson Briggs and Shadrack Mathew Uzoma

Power Loss Minimisation on 11kV Distribution Network using Feeder Reconfiguration pp. 12-19

T. O. Ale and I. O. Abumere

Flammability and Gravity Effect of Horizontal and Vertical Propagating Flames in Tube pp. 20-26

Celestine Ebieto Ebieto and Oku Nyong

Performance Improvement of a Direction Finding System Antenna Using Method of Moment (MOM) pp. 27-32

Ogonna F. Anaebo, Gloria N. Ezeh, Onyebuchi Chikezie Nosiri and Cosmas K. Agubor

A Survey on the Effects of Cutting Parameters on Surface Roughness When Milling 40Cr Steel Using End Mill Cutter pp. 33-36

Nguyen Hong Son

Outlet Surface Area Influence in Spiral Casing Design on Centrifugal Fan Performance pp. 37-41

Ardit Gjeta and Lorenc Malka

A Novel System for Processing User Interfaces pp. 42-45

Frank Edughom Ekpar

Arbitrary Dimensional Data pp. 46-56

Frank Edughom Ekpar

Single Harmonic Black Holes pp. 57-75

Wim Vegt

Heat Exchanger Process Optimization in A Typical Brewery Plant pp. 76-81

Shadrack Uzoma Mathew and Lebari Aban Tamzor

General algorithm for searching user data in social media of the Internet pp. 82-86

Oleh Mastykash and Andii Peleshchyshyn

Illusions of Elastic Collisions in the Sciences pp. 87-90

Kent W. Mayhew

Effect of the Type of Curing on the Corrosion Behavior of Concrete Exposed to Urban and Marine Environment pp. 91-95

Miguel Angel Baltazar-Zamora, Sabino Márquez-Montero, Laura Landa-Ruiz, René Croche and Oscar López-Yza

Optimal Simulation and Mathematical Correlation of Mud Weight for Effective Wellbore Stability Management pp. 96-99

Boniface A. Oriji and Raphael Odikpo Okeke

Outage Analysis and System Disturbances on 330 kV and 132 kV Transmission System in Nigeria pp. 100-102

Najeem Olawale Adelakun and Banji Abubakar Olanipekun

Development of Commercial Tapioca Pearls used in Bubble Tea by Microwave Heat–Moisture Treatment in Cassava Starch Modification pp. 103-106

Ashani Uthpala Bulathgama, G. D. M. Gunasekara, I. Wickramasinghe and M. A. D. Somendrika

Failure Analysis and Repair of a Broken Extruder Shaft pp. 107-111

Salem Ali Karrab and Mohamed Ali Ballem

2020, month December

Design, Development and Implementation of Mobile Applications to Support the Educational Process in the Greek Secondary Education System

Eleni Seralidou, Nikos Vallianatos, Dimitra Tsolakou and Christos Douligeris

Development of a Methodology for the Design and Management of Academic Strategy – A Holist Approach using Multi-criteria Analysis Techniques

Manolis Chalaris, Stefanos Gritzalis, Cleo Sgouropoulou and Manolis Maragoudakis

Reflections on Online Delivered Lessons, During COVID-19 Induced Restrictions, for Students of Informatics in a Vocational Lyceum of Greece

Panagiotis S. Makrygiannis

Post-pandemic Pedagogy: Distance Education in Greece During COVID-19 Pandemic Through the Eyes of the Teachers

Stefanos Nikiforos, Spyros Tzanavaris and Katia Lida Kermanidis

Visualizing the Educational Data Mining Literature

I. Papadogiannis, N. Platis, V. Poulopoulos, C. Vassilakis, G. Lepouras, M. Wallace and G. Karountzou

Emotional Intelligence and Educational Robotics: The Development of the EI-EDUROBOT

Dimitrios Ziouzios, Michalis Ioannou, Tsolopani Ioanna, Tharrenos Bratitsis and Minas Dasygenis

Modeling, Designing and Implementing an Open Personalized Learning Environment for the Electrical Engineering Training Course in Vocational Education

Georgios Kolyvas, Dimitrios Kotsifakos and Christos Douligeris

Examining the use of STEAM Education in Preschool Education

Constantina Spyropoulou, Manolis Wallace, Costas Vassilakis and Vassilis Poulopoulos

“Clavis Aurea”: An augmented Reality Game for the Teaching of Local History

George Koutromanos, Theodora Pittara and Christopher Tripoulas

Using Learning Theories for the Creation of a Distance Digital Course in Mathematics for Higher Education

Ioannis Velentzas and Spyridon Doukakis

A Visual Depiction of an Educational Robotics Framework Aimed to Foster the Development of Collaboration Skills

Emmanouil A. Demetroulis, Nikos Platis, Manolis Wallace, Angeliki Antoniou and Vassilis Poulopoulos

2020, month February

A Digital Bulletin Board for the School Community pp. 1-5

Panagiotis Karageorgos and Dimitrios Gouvedaris

Towards A Teaching Model for Managing Students’ Cognitive Load In Activities That Integrate Computational and Mathematical Thinking pp. 6-11

Giorgos Panselinas, Manolis Mavrikis, Eirini Geraniou, Popi Anastasiou, Emmanouil Tambouratzis and Emmanouil Kartsonakis

STEM and Collaborative Learning: An Alternative Approach pp. 12-16

Stefanos Nikiforos and Spyros Kolyvas

An Example of Designing Modular Vocational Syllabi pp. 17-21

Panagiotis S Makrygiannis, A. Paradisi, T. Tsapelas, Evangelos C. Papakitsos and Dimitrios Piromalis

The Shield of Achilles using 3D Technologies to Support Teaching Scenarios of Homeric Epics pp. 22-25

P. Angelopoulos and E. Solomou

Online Discovery/Constructivistic Learning Using Cognitive Tools in Mathematics’ Higher Education pp. 26-32

Konstantinos Korres

Interdisciplinary Educational Approach STEM and HASS Knowledge Fields Using ICTs Support. Case of an Application for a Pilot Experiment pp. 33-42

Socrates C. Savelides, Rigo Fasouraki, Efthymios Georgousis, Katerina Kolokotroni and Maria S. Savelidi

Entity Configuration for Designing a Port Security Information System: Proposed Extensions of the Vocational Education and Training Curriculum pp. 43-48

Apostolos Κaltsas, Sofia Gompou and Dimitrios Κotsifakos