Parametric Analysis and Numerical Optimization of Root-Cutting Shovel of Cotton Stalk Harvester Using Discrete Element Method

Hua Liu, Silin Cao (), Dalong Han, Lei He, Yuanze Li, Jialin Cai, Hewei Meng () and Shilong Wang
Additional contact information
Hua Liu: College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China
Silin Cao: Institute of Machinery and Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi 832000, China
Dalong Han: Institute of Machinery and Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi 832000, China
Lei He: Institute of Machinery and Equipment, Xinjiang Academy of Agricultural and Reclamation Science, Shihezi 832000, China
Yuanze Li: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Jialin Cai: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Hewei Meng: College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China
Shilong Wang: College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China

Agriculture, 2024, vol. 14, issue 9, 1-18

Abstract: Aiming at solving the problems of the high cost of manual pulling, the low reliability of existing pulling devices, and the high breaking rates and high leakage rates in the process of cotton stalk reuse after removal from the field in the Xinjiang cotton area, a soil-loosening and root-cutting cotton stalk pulling and gathering machine was researched and designed; a root-cutting force model was established; the key parameters of the V-shaped root-cutting knife were calculated and optimized; and the ranges of the slide cutting angle, the cutting-edge angle, and the soil entry angle were determined. A shoveling process simulation of the V-shaped root-cutting knife and the root–soil complex was constructed, and the working mechanism of the V-shaped root-cutting knife was clarified. In order to verify the reliability and operation performance of the V-shaped root-cutting knife, the slide cutting angle, the cutting-edge angle, and the soil entry angle were used as the test factors, and a response surface test with three factors and three levels was carried out with the root-breaking force and the mean value of the cutting resistance as the test indices. The test results were analyzed by variance analysis, and the significant factors influencing the root-breaking force in descending order were the slide cutting angle, cutting-edge angle, and soil entry angle. The degrees of influence on the mean value of the cutting resistance were ordered as follows: slide cutting angle, soil entry angle, and cutting-edge angle. In order to make the V-shaped root-cutting knife achieve the optimal working state, the parameters of the test indices were optimized, and the optimal design parameters of the V-shaped root-cutting knife were set as follows: the slide cutting angle was 48.3°, the cutting-edge angle was 43.4°, and the soil entry angle was 26.2°. The field uprooting test showed that the average pass rate of root breakage was 94.8% and the average pull-out rate of cotton stalks was 93.2%. This study provides theoretical guidance for the development of a root-breaking mechanism for cotton straw harvesters.

Keywords: cotton stalk harvest; V-shaped root-cutting knife; discrete element method; root–soil complex; optimize and design (search for similar items in EconPapers)
JEL-codes: Q1 Q10 Q11 Q12 Q13 Q14 Q15 Q16 Q17 Q18 (search for similar items in EconPapers)
Date: 2024
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2077-0472/14/9/1451/pdf (application/pdf)
https://www.mdpi.com/2077-0472/14/9/1451/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jagris:v:14:y:2024:i:9:p:1451-:d:1463799

Access Statistics for this article

Agriculture is currently edited by Ms. Leda Xuan

More articles in Agriculture from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().