Systematic Calibration and Validation of Discrete Element Model Parameters for Cotton Root Systems

Yong Yue, Rensheng Xing, Yasenjiang Baikeli (), Haodong Xu, Weibin Ma and Liehong Guo
Additional contact information
Yong Yue: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Rensheng Xing: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Yasenjiang Baikeli: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Haodong Xu: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Weibin Ma: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
Liehong Guo: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China

Agriculture, 2025, vol. 15, issue 17, 1-24

Abstract: Aiming at the problem of lacking accurate and reliable contact and bonding parameters in the discrete element simulation of whole cotton stalk harvesting equipment, this study proposed a reverse modeling method for cotton roots combining the Discrete Element Method (DEM) with 3D laser scanning. This method systematically constructed a general discrete element model and completed its parameter calibration. Firstly, cotton root samples were collected and measured to obtain key morphological parameters, providing a basis for selecting representative roots and performing 3D reverse reconstruction. Subsequently, mechanical parameters and contact parameters of the cotton roots were measured and calibrated through mechanical tests and stacking angle tests. Furthermore, based on the Hertz–Mindlin with Bonding contact model, a structured root sample model was established using a layered particle combination strategy. The bonding parameters were then optimized and calibrated through shear and tensile mechanical simulation experiments. Finally, a discrete element model of the root–soil complex was established based on the optimal parameter set. The reliability of the model was validated by comparing the simulation results with physical field tests of root extraction force. The results indicated that in the contact parameter validation test, the relative error between the simulated stacking angle and the measured value was only 0.43%, demonstrating the high accuracy of the model in simulating contact characteristics. In the bonding parameter calibration validation tests, the relative errors between the simulation results and measured values for shear and tensile mechanics were 1.22% and 1.40%, respectively, indicating that the model parameters could accurately simulate shear strength and tensile strength. Finally, in the root extraction force validation test, the relative error between the simulated extraction force and the field-measured value was 3.76%, further confirming the model’s applicability for analyzing the complex interaction mechanisms between roots and soil. The findings of this study can provide key models and parameter support for the digital design, operation process simulation, and performance optimization of whole cotton stalk harvesting equipment.

Keywords: cotton root system; discrete element method (DEM); three-dimensional modeling; root–soil interaction; bonding parameters (search for similar items in EconPapers)
JEL-codes: Q1 Q10 Q11 Q12 Q13 Q14 Q15 Q16 Q17 Q18 (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2077-0472/15/17/1827/pdf (application/pdf)
https://www.mdpi.com/2077-0472/15/17/1827/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jagris:v:15:y:2025:i:17:p:1827-:d:1734192

Access Statistics for this article

Agriculture is currently edited by Ms. Leda Xuan

More articles in Agriculture from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().