Design and Experiment of a Multi-Duct Air-Delivered Sprayer for Closed Apple Orchards

Juxia Wang (), Fengzi Zhang, Yuanmeng Wang, Haoran Li, Yusheng Jin, Yanqing Zhang, Zhiyong Zhang and Qingliang Cui
Additional contact information
Juxia Wang: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Fengzi Zhang: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Yuanmeng Wang: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Haoran Li: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Yusheng Jin: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Yanqing Zhang: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Zhiyong Zhang: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China
Qingliang Cui: College of Agricultural Engineering, Shanxi Agricultural University, Jinzhong 030801, China

Agriculture, 2025, vol. 15, issue 18, 1-27

Abstract: A self-propelled multi-duct air-delivered sprayer was developed to address the challenges of dense canopies and low pesticide utilization in closed-canopy apple orchards. It featured an intelligently adjustable spray bar and formed a directional air curtain via a centrifugal fan and a duckbill air outlet to improve droplet penetration. Using CFD simulations, the air duct size and the air outlet distance were optimized, and the field orthogonal test was carried out with driving speed, nozzle pressure, and nozzle type as factors. The results showed that the optimal parameters were an air duct size of 230 × 110 mm, an air outlet distance of 350 mm, and a fan speed of 2160 r/min. Compared to liquid pump independent operation, liquid pump–fan cooperative operation significantly increased droplet deposition density ( p < 0.05) and reduced the degree of dispersion. All three factors significantly influenced deposition density ( p < 0.05), and nozzle type had the greatest influence on deposition density, followed by nozzle pressure, and then driving speed. Optimal performance was obtained at a 0.3 m/s driving speed, a 3 MPa nozzle pressure, and a 6502 nozzle type. Under the optimal combination of operating parameters, field verification tests demonstrated that cooperative operation achieved higher average coverage (60.54% vs. 48.30%) and average deposition density (71.34 vs. 60.54 droplets/cm 2 ), with a more uniform coefficient of variation in droplet coverage on leaves (a range of 13.37–19.07% vs. 9.70–22.67%). These results indicate that the sprayer exhibits strong penetration and provides good uniform coverage, effectively increasing droplet deposition across different canopy heights.

Keywords: closed apple orchard; multi-duct air delivery; sprayer; optimization test; droplet deposition density (search for similar items in EconPapers)
JEL-codes: Q1 Q10 Q11 Q12 Q13 Q14 Q15 Q16 Q17 Q18 (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
https://www.mdpi.com/2077-0472/15/18/1958/pdf (application/pdf)
https://www.mdpi.com/2077-0472/15/18/1958/ (text/html)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:gam:jagris:v:15:y:2025:i:18:p:1958-:d:1751087

Access Statistics for this article

Agriculture is currently edited by Ms. Leda Xuan

More articles in Agriculture from MDPI
Bibliographic data for series maintained by MDPI Indexing Manager ().