Int. J. Sci. Res. Mech. Mater. Eng

2017 - 2026

From International Journal of Scientific Research in Mechanical and Materials Engineering
Bibliographic data for series maintained by Pankaj Sharma ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 8, issue 6, 2024

A Review on Investigations of the Mechanical and Microstructural Behaviour of Metal Matrix Composites Reinforced with Graphite and Silicon Carbide pp. 01-05

M Divyansh, Vikas Gadpale and Abhinav Kumar

Investigations of the Mechanical and Microstructural Behaviour of Metal Matrix Composites Reinforced With Graphite and Silicon Carbide pp. 06-16

M Divyansh, Vikas Gadpale and Abhinav Kumar

Enhancing Operational Efficiency: A Case Study on Six Sigma Implementation in the Casting Industry pp. 17-25

Amarishkumar J Patel and Sunilkumar N Chaudhari

PM - Vidyalaxmi Scheme for Empowering Middle Class Youths to Pursue Quality Higher Education pp. 26-33

H. M. Naveen

Design and Development of Solar Powered Water Purifier pp. 34-41

Sunil Kumar K, Arun Kumar B R, K C Saqhib Pasha, Naveenkumar Y M and Nithish K

Volume 8, issue 5, 2024

General Statutory Obligations under MSME and Union Budget 2024-25 pp. 01-08

H M Naveen

A Review on Impact of Productivity and Quality of Welds Produced by The Submerged ARC Welding Process pp. 09-14

Upendra Kumar and Lokesh Singh

Impact of Productivity and Quality of Welds Produced by the Submerged Arc Welding Process are Affected by Type of Filler Wire, Wire Size, and Welding Current pp. 15-26

Upendra Kumar and Lokesh Singh

Optimizing EDM Process Parameters for Enhanced Surface Finish and Metal Removal Rate (MRR) pp. 27-36

Nishant Mani and Rahul Mishra

Volume 8, issue 4, 2024

A Review on Aluminium Metal Matrix Composite Process Parameters Through Optimization using Taguchi’s Analysis pp. 01-09

Ranjan Kumar Gupta and Amit Kumar Mandape

Investigations of Aluminium Metal Matrix Composite Process Parameters through Optimization using Taguchi’s Analysis pp. 10-23

Ranjan Kumar Gupta and Amit Kumar Mandape

A Review on Multi Drilling Process on Aluminium-Tin Multi Material pp. 24-37

Naveen Kumar and Lokesh Singh

Experimental Study and Analysis of Drilling Process on Aluminium-Tin Multi Material pp. 38-52

Naveen Kumar and Lokesh Singh

Evolution of Aluminium-Tin Multi Material Drilling Process on Bench Press Drill Machine pp. 53-63

Naveen Kumar and Lokesh Singh

UGC Guidelines for Internship / Research Internship for Under Graduate Students, 2024 pp. 64-76

H. M. Naveen

A Review on Thermal Analysis of Engine Cylinder Fins for Enhancing Heat Dissipation pp. 77-84

Abhay Mishra, Sunil Prabhakar and Dinesh Kumar Rao

Enhancing Internal Combustion Engine Performance with Textile Engineering Materials pp. 85-88

Ganesh S. Kakad

Volume 8, issue 3, 2024

Design and Development of Pneumatic Sheet Metal Cutting Machine pp. 01-09

Sudarshan. U, Sunil Kumar K, Darshan S. R, Kushal. P and Varshith. N

Design and Fabrication of Wood Cutting and Buffing Machine pp. 10-17

Madhusudhana K. M, Harish R. S, Pruthvikumar, Srinivasa C. T and Suryateja K. J

Design and Fabrication of Horizontal Axis Wind Turbine pp. 18-21

Mula Pavan Kumar Reddy, Hanumanthe Gowda, Nalina L, Kariyanna Gari Shashank and Prabhu G V

Design and Fabrication of Automatic Lawn Mower pp. 22-26

N Lakshmi Puthra, Suchendra K R, Bhavani, Manoj T. M and Venkatesh S

Semi Automatic Floor Cleaner pp. 27-33

Deepak Achar, Raghavendra Prasad, Dhanush K C, Bharath K and Kishor H B

Design and Fabrication of Sambar Serving Machine pp. 34-39

Nikhil T, Lokesh Yadhav B R, Madan T L, Manjunath P and Manu S

Development of A Power Generation Unit Using Dual Renewable Energy Source pp. 40-44

P Rukmangadha, Nithin A, Rajashekara Reddy, Shashank G and Shashank

Design and CFD Analysis of Windmill Blade pp. 45-49

Rohit Wadekar, Siddhant Kalapure, Omkar Mitkari, Siddhant Shivarkar and Anup Wani

Development of Robotic Vehicle with GPS System for Landmine Detection pp. 50-54

Kanishka Dhar, Irfan Ahmad Najar, J Jeffrey Amala Michael, Chirag M, Prapul Chandra Ac and Mahantesh M Math

Optimization of Process Parameters of TIG Welding using Taguchi Approach: A Review pp. 55-62

P Tarkesh Rao and Lokesh Singh

Optimization of TIG Welding of Al 65032 through Process Parameters using Taguchi Method pp. 63-74

P Tarkesh Rao and Lokesh Singh

Volume 8, issue 2, 2024

Designed and Analysed of Three Distinct Composite Material-Based Mano Leaf Spring using ANSYS pp. 04-26

Anand Kumar Pandey and Nikhil Bajpai

Experimental Intriguing for Maximization of Useful Life of Spur Gears from Stress Analysis under Multiple Combinations of Pressure Angle pp. 27-30

Prithwiraj Jana

Performance and Characterization of Alsi10mg as Additive Base Material pp. 31-36

Vinayak Wagmare and Sandeep Mashetty

Advancing Environmental Sustainability with Artificial Intelligence: Harnessing the Potential of Machine Learning for Climate Change Mitigation pp. 37-46

Albert C, Sree Vinesh and Raja Vignesh

Advancing Heat Exchanger Technology in Textile Engineering Materials for Electric Vehicles through Additive Manufacturing pp. 47-52

Ganesh S. Kakad and Sagar S. Gaddamwar

A Review of Advances in Cold Spray Coating Process pp. 53-62

Saikumar Chalivendra

Volume 8, issue 1, 2024

Proof of the Ethereal-Vortex Nature of Gravity pp. 01-04

S. Orlov

A Review on Hard Turning Operation for Case Hardening Steels pp. 05-11

Abhishek Gupta and Lokesh Singh

Investigations of Hard Turning Parameters through Experiments for Case Hardening Steels pp. 12-23

Abhishek Gupta and Lokesh Singh

Volume 7, issue 6, 2023

On Optimal Trajectory in Space Flight pp. 01-04

S. Orlov

Recent Advancements and Critical Insights in Casting Processes pp. 05-18

Amarishkumar J Patel and Sunilkumar N Chaudhari

Systematic Review of Process Simulation and Optimization Tools for Full-Scale Wastewater Treatment Plant Design pp. 19-49

Matluck Afolabi, Ogechi Amanda Onukogu, Thompson Odion Igunma, Adeniyi K. Adeleke and Zamathula Q.S. Nwokediegwu

Volume 7, issue 5, 2023

A Review on the Flux Cored Arc Welding through Process Parameter pp. 01-11

Sunil Sharma and Lokesh Singh

Experimental Study of the Flux Cored Arc Welding through Process Parameter pp. 12-25

Sunil Sharma and Lokesh Singh

On Invariant Speed of Light pp. 26-29

S. Orlov

Performance and Emission Analysis of a CRDI Engine Fuelled with Compressed Natural Gas and Waste Plastic Oil Blends pp. 30-38

Paneti.Kullayappa, J. Paul Rufus Babu and P. S. Bharadwaj

Volume 7, issue 4, 2023

The Separator Importance in Mechanical and Biological Practical Applications pp. 01-05

Jitendra Sunte

Tribological Behaviuor On Aluminium –Nano Metal Matrix Compositre with Addition of Titanium Di Oxide and Solid Lubricant (Powder Metalurgy Process) pp. 06-13

M. Sairam Karthik and D. Balaji

Study on Tribological Performance of Nano Particle Reinforced Metal Matrix Composite pp. 14-30

Shaik Mansoor Ali and D. Balaji

A Review on Smart Irrigation System: Sugarcane Diseases Detection Using Raspberry-pi pp. 31-38

Jagannath Kannale and Sangappa K Rajeshwer

A Review on IoT Based Design of a Smart bin using Raspberry pi pp. 39-42

Jagannath Kannale, Basavaraj R B and Sangappa K Rajeshwer

Volume 7, issue 3, 2023

FEM Based Meshing Principles and Practices in Mechanical and Civil Projects pp. 01-05

Jitendra Sunte, Sudhir Andure, Sampath Biradar and Priti Khandre

Dynamic Modelling Research of the Dual-Rotor System for Aero-Engine pp. 06-14

CholUk Ri, KwangIl Ri, CholHyok Kye, KumChol Kim, JongMin Han, MyongHo Kwon, SuJin Jang, SongHyok Pak, InHyok Min and JinHyok Kim

A Study of Surface Morphology and Wear Rate Prediction of Coated Inconel Specimen of 600, 625 and 718 pp. 15-23

Vinod Kumar, Udaya Ravi M and Yuvaraja Naik

Modelling and Optimization of Linear Active Suspension System for Half-Vehicle Model pp. 24-40

Shashank Sagar, Ajai Singh and Vikash Dwivedi

The Vehicle Suspension Parameters System Analysis - A Review pp. 41-50

Shashank Sagar, Ajai Singh and Vikash Dwivedi

Performance Optimization of Steam Generator by Reduction of Unburned Carbon pp. 51-65

Sanaullah, Shailendra Kumar and Vikash Dwivedi

A Review on Optimization of Steam Generator in Thermal Power Plants by Reduction of Unburned Carbon pp. 66-75

Sanaullaha, Shailendra Kumar and Vikash Dwivedi

Future-Ready Manufacturing: Resource Optimization and Environmental Stewardship in Machining and Production Systems pp. 76-90

Sunilkumar N Chaudhari and Amarishkumar J Patel

Volume 7, issue 2, 2023

The Controlling Measures and Solution to Problems of Earthquake pp. 01-03

Jitendra Sunte

UGC Guidelines for Establishment of Education Departments in Multidisciplinary Institutions pp. 04-12

H M Naveen

The Universal Materials Behaviour pp. 13-18

Jitendra Sunte

A Review on Survey Based Comparative Analysis Model for Public and Private Bus Services in Maharashtra State pp. 19-23

Sunil R. Kewate, Vivek R. Gandhewar and Bhavesh Sunil Raut

The combination of all loadings nature of plots leads to technical unwanted Nature destructive force pp. 24-27

Jitendra Sunte and Basavaraj Patil

Volume 7, issue 1, 2023

The Complete Problem-Solving Method of Viral Like Corona Waves from Root Level pp. 01-02

Jitendra Sunte

Design of Automatic Bumper and Brake to Prevent Before Collision pp. 03-07

D. Balaji, E. Aravind Karthick, M. Ashok and B. Sairam

Mechanical Properties and Microstructural Characterisation of Dissimilar Laser Welded Joints of Titanium Grade 2 With AA5052 Alloys pp. 08-13

D. Balaji, M. K. Rasool Mydeen, S. Ramkumar, M. Vaishnavaraj and P. Baskar

Design of Universal Test Bench for The Pneumatic System pp. 14-20

D. Balaji, M.Logesh, K. Prakash and M. Kumaran#

Fabrication of Material Conveying System pp. 21-26

D. Balaji, K. Kotteeswaran, N.Muthu Vairavan, T. Gopinath and A. Thriloknath Reddy

Smed Concept For Heavy Structures pp. 27-31

D. Balaji, J. Sathish, J. Vengadesh and V. Yuvaraj

Fabrication of Submersible Water Pump with Automatic Water Level Controller pp. 32-35

D. Balaji, R. Sugundan and D. Karthikeyan

Universal CG Role in National and International Level Prediction pp. 36-37

Jitendra Sunte

Role of Photon on Biological Composite Hair for Some Videos Delevering pp. 38-39

Jitendra Sunte

LING Pooja and BHOOMI Pooja in the Universe pp. 40-41

Jitendra Sunte