Int. J. Sci. Res. Mech. Mater. Eng

2017 - 2026

From International Journal of Scientific Research in Mechanical and Materials Engineering
Bibliographic data for series maintained by Pankaj Sharma ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 6, issue 6, 2022

Line Graph of Friendship Graph and CTI pp. 01-08

Albina A and Manonmani A

Design of Floor and Stair Case Stone for Solution to Slip and Fall Accident pp. 09-13

Jitendra Sunte

Design And Fabrication of Two Pillar Mechanical (CAM) Operated Press Machine pp. 14-21

D. Balaji, B. Dilip, M. Rajkumar, P. Balachandran and D. Alexander

A Review on Burr Formation during Drilling Operation of Aluminium Alloy pp. 22-27

Pushpendra Kumar and Dinesh Dubey

To Study on Burr Development during Drilling Operation of Aluminium Alloy (Al6061) pp. 28-42

Pushpendra Kumar and Dinesh Dubey

Tumor Microenvironment Engineering as a Strategy to Amplify Photodynamic Therapy and Immune Checkpoint Response pp. 43-58

Gavkharoybonu A.G. Kizi

Physics-Informed Digital Twins for Real-Time Health Monitoring Performance Prediction and Remaining Useful Life Assessment of Gas Turbines Foundations and Structural Support Systems pp. 59-88

Ransben Zac Addy, Aondoseer Abraham Atoo and Emmanuel Okechukwu Nwafor

Volume 6, issue 5, 2022

Operations in Synthesized Eight Link Gear Variable Topology Mechanism using Python Programming pp. 01-08

H. M. Naveen, Shrinivas S. Balli, Umesh M. Daivagna and Rashmi Patil

Using Various Process Parameters in Gas Metal arc Welding to Optimize of Weld Quality pp. 09-20

Vikram Singh and Himanshu Vasnani

Innovative Use of Algal Biomass for Heavy Metal Bioremediation pp. 21-29

Saikumar Chalivendra

Automation of Process Control Systems Using Siemens TIA Portal: A Case Study Approach pp. 30-55

Evans Abiodun Sunday and Gbenga Olumide Omoegun

Bridging the Gap Between Technical Asset Management and Executive Strategy in Renewable Energy: A Framework for Portfolio Managers as Policy and Investment Influencers pp. 56-76

Stefan Daniel Anim-Sampong, Mosunmola Omowunmi Ilesanmi and Obidipe Oluwaseun Yetunde Adetutu

Volume 6, issue 4, 2022

The Municipal Plastic Waste Degradation Techniques pp. 01-07

Jitendra Sunte

The Copper Materials Packing for Alignment Work in Dryers for Bearings in Paper Mill pp. 08-16

Jitendra Sunte and Vinayak Waghmare

A 3D Printing on Engineering and Medical Field pp. 17-26

Jitendra Sunte and Jagdish Rathod

The Design of 1 MW Solar Power Plant pp. 27-35

Jitendra Sunte

The Survey of Renewable Energy Sources pp. 36-43

Jitendra Sunte, Mahesh, Prashant Kale and Blaji Rangrao Jadhav

The Material Failure by Von-Mise’s Stress and Resonance Concept pp. 44-51

Jitendra Sunte

A Pacemaker Solutions to Heart Rhythm pp. 52-58

Jitendra Sunte

A Review on Solar Still with Nano Material Coating on Absorber Plate for High Performance pp. 59-66

Priyanka Singh and Vishwajeet Kureel

Performance Analysis of Solar Still with Nanomaterial Coating on Absorber Plate pp. 67-78

Priyanka Singh and Vishwajeet Kureel

The Test Method for Wear Testing Inconel 625 with a Pin-on-Disk Apparatus pp. 79-85

Jitendra Sunte, Vinod Kumar Biradar, Praveen Kumar Bs and Yuvaraj Naik

A Review Paper of Electro discharge machining Process Parameters on Tungsten Carbide using Copper Electrode pp. 86-92

Abhishek Gupta and Narendra Kumar Patel

Experimental Investigation of EDM Process Parameters on Tungsten Carbide Using Copper Electrode pp. 93-96

Abhishek Gupta and Narendra Kumar Patel

Volume 6, issue 3, 2022

Utilization of Six Sigma Technique for Process Improvement in Transformation Manufacturing Industry A Review pp. 01-05

Rajeev Ranjan Mishra and Lokesh Singh

Utilization of Six Sigma Technique for Process Improvement in Transformation Manufacturing Industry pp. 06-10

Rajeev Ranjan Mishra and Lokesh Singh

A Review on Positive Semi Definite System on Vibration pp. 11-15

Jitendra Sunte

Human Emotion Management System pp. 16-24

Evelyn Tabitha E and Mary Nisha D

An Elastohydrodynamic Lubrication of Synovial Lubricant on Human Body pp. 25-35

Jitendra Sunte and Vinayak Waghmare

Fabrication and Performance Analysis of Laminar Burning Velocity of Fuel Air Mixture pp. 36-42

R. Nallappan, M.Naveen Kumar, R. Arravind, C. Vijayakumar and M. Meganathan

Compressive Behavior of Composite Support Column for Aircraft Cabin Floor pp. 43-48

P. Prassanna, P. Praveenkumar, S. Sarithiranayagan and S. Pappannan

Design and Fabrication of Power Generation Using Gravitational Force pp. 49-53

Mithun Krishna R M, Mories Raj, Sreehari G and Vishnu C

Automation of Enamel Removal Process pp. 54-59

Dhineshkumar G, Harishware G, Muralidharan M, Shahin M and Vasanth B

A Critical Success Factor in Auto Component Manufacturing Industry: An Empirical Study pp. 60-64

T. Varunkumar, S. Sanjay, B. Praveenkumar and P. Ajaypramod

Characterization of GTAW-Pulsed Weld Overlay with 97.5% Argon and 2.5% Hydrogen Gas Using Inconel 625 and Incoloy 825 Filler Wire pp. 65-67

P. Neilash Kumar and C. Lindon Robert Lee

Design and Fabrication of Lake Garbage Collecting Robot pp. 68-71

Boobesh, Inbaselvan, Gowtham and P. Arulvel

Treatment of Textile Waste Water using Activated Carbon Prepared from Pumpkin Peel pp. 72-76

Aravinth E, Dhanalakshmi M, Jaisankar T, Vasantha Kumar P and Jayapal A

Performance Analysis of Fluted Wing Surfaces for Low Altitude Air Vehicles pp. 77-82

M. Benedict, J. Hari Krishnan and A. Manoj Kumar

Analysis and Characterizes of Steering Wheel Alignment Tracking System pp. 83-86

M. Vijai, K. Gunasekar and G. Logeswari

Unsteady Thermal Modelling of Altitude Adaptive Dual Bell Nozzle with Regenerative Cooling of Thrust Chamber in Semi-Cryogenic Engine pp. 87-95

D. Navinprabu, A. Karthikeyan, N. Tamilselvan and S. Balakrishnan

Rural Irrigation Using Smart System pp. 96-98

K. R. Suja, Amarthiya Nishalini S A and Deepika V S

A Review on 4D - Printing Design Materials pp. 99-108

Jitendra Sunte

Fatigue Driving Detection Method Based on EEG Analysis pp. 109-115

B. Agalya, H. B. Kamarunisha and R. Aarthi

Studies on Variable Biological Applications of Schiff Base Complexes pp. 116-122

M. Suganya and G. Puthilibai

The Fracture Mechanics in Engineering Materials pp. 123-129

Jitendra Sunte, Arun Kolekar and Vinayak Waghmare

Volume 6, issue 2, 2022

Dynamic Modelling for Calculating Comprehensive Stiffness of the ball bearing pp. 01-06

Ri CholUk, ZhangZhunHyok, Ri JuYong, NamGung Hwan, Kim ChangSop, Sung YunSong and Kim JuYong

Development of Multioperation Fixture for Reduction in Setup Time pp. 07-11

Mandlik Y. S, Shardul R. C, Kakulte O S, Bhoj R. K, Kothawade V. E and Vadnere A. P

A Review on Taguchi Optimization Technique of Weld Bead Geometrical Parameters using Submerged Arc Butt Weld in Mild Steel pp. 12-19

Sanjay Kumar Verma, Rupendra Kumar Marre and Lokesh Singh

Taguchi Optimization Technique of Weld Bead Geometrical Parameters using Submerged Arc Butt Weld in Mild Steel pp. 20-26

Sanjay Kumar Verma, Rupendra Kumar Marre and Lokesh Singh

A Review on Using Design of Experiments to Optimize Machining Parameters in Turning Operation pp. 27-33

Deepak Kumar Verma, Rupendra Kumar Marre and Lokesh Singh

Using Design of Experiments to Optimize Machining Parameters in Turning Operation pp. 34-44

Deepak Kumar Verma, Rupendra Kumar Marre and Lokesh Singh

A Review on Friction Stir Welding of Cast Aluminium Alloy (A413) pp. 45-52

Devendra Kumar Dewangan, Lokesh Singh and Sushil Kumar Maurya

Optimization of process parameters for Friction Stir Welding of Cast Aluminium Alloy (A413) pp. 53-67

Devendra Kumar Dewangan, Lokesh Singh and Sushil Kumar Maurya

Optimization of Machining Parameters In A Turning Operation of Austenitic Stainless Steel To Minimize Surface Roughness And Tool Wear: A Review pp. 68-73

Vijay Krishna Chaturvedi and Nitin Shukla

Optimization of Machining Parameters In A Turning Operation of Austenitic Stainless Steel To Minimize Surface Roughness And Tool Wear pp. 74-91

Vijay Krishna Chaturvedi and Nitin Shukla

Volume 6, issue 1, 2022

Dynamic Modelling for Calculating Comprehensive Stiffness of the Taper Roller Bearing pp. 01-10

Ri CholUk, NamGung Huan, O RyongSik, Kim ChangSop, Han JongMin, Sung YunSong and KimJuYong

Friction Stir Welding of Cast Aluminium Alloy (A356): A Review pp. 11-18

Akshay Patel, Lokesh Singh and Sushil Kumar Maurya

Optimization of Process Parameters for Friction Stir Welding of Cast Aluminium Alloy (A356) pp. 19-33

Akshay Patel, Lokesh Singh and Sushil Kumar Maurya

Performance Analysis of H-Rotor Vertical Axis Wind Turbine pp. 34-47

Prabhat Kumar Patel and Vishwajeet Kureel

Hybrid Retrieval Architectures: Integrating Vector Search into Production Systems pp. 48-57

Sheriff Adepoju