International Journal of Scientific Research in Civil Engineering

2016 - 2026

From International Journal of Scientific Research in Civil Engineering
Bibliographic data for series maintained by Pankaj Sharma ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 9, issue 6, 2025

Non-Destructive Evaluation of Concrete: From Surface Hardness to Corrosion Detection pp. 01-09

Vijay Kumar Pandit

Bamboo Reinforcement as Sustainable Alternate to Steel in Concrete pp. 10-12

Venkatesh Viswanathan and Manikandan Srinivasan

Characterization and Suitability Assessment of Construction and Demolition Waste for Bitumen Incorporation in Sustainable Pavement Construction pp. 13-19

Avijeet Raj and T.N. Mishra

Analysis of Traffic Congestion in a Network of Roads at the Calabar Effio-Ette Intersection at the Microscopic Level pp. 20-36

Jerome Egbe

Advances in Hazard Identification Systems for Large Scale Construction Operations pp. 37-70

Stephen Francis Obogo, Cynthia Obianuju Ozobu, Mike Ikemefuna Nwafor and Saliu Alani Adio

Volume 9, issue 5, 2025

Earthquake Analysis and Retrofitting of Reinforced Concrete Structures Utilizing Various Approaches pp. 01-08

Vijay Kumar Pandit

Future Trends in Substation Risk Management pp. 09-11

Abi Bashir Baba

Degradation of Phenol Using Adsorption Method pp. 12-16

Patel Mahim Jigar

Study of Steel Plates with Same Chemical Composition and Varying Thickness pp. 17-21

Pranav Diwan and Pushyamitra Mishra

Conceptual Integrated Safety Management Model for Multi Zone Urban Infrastructure Projects pp. 22-55

Stephen Francis Obogo, Cynthia Obianuju Ozobu, Adepeju Nafisat Sanusi and Rasheed O. Ajirotutu

Volume 9, issue 4, 2025

Hydrodynamic Cavitation for Industrial Wastewater Treatment: A Review of Efficiency, Mechanisms, and Hybrid Approaches pp. 01-05

Prachi Trivedi, Ayushi Solanki and Krunal Patel

Sustainable Water Infrastructure for Urbanizing Regions: Design and Validation of Aba North’s Multi-Component Supply System pp. 06-19

Uchenna Ukpai, Isaac Enuma, Daniel Ulokaji, Aisosa Edokpayi and Idonije Edward

A Review on Strength Characteristics of Concrete Using Fly Ash and Steel Fiber under Alkaline Attack pp. 20-29

Neelam Prasad Choudhary, Rakesh Sakale and Hirendra Pratap Singh

Study of Characteristic Strength of Concrete by Partial Replacing Cement with Ceramic Waste Powder pp. 30-46

Harikrishna Chaudhry and Rahul Kumar Satbhaiya

Study of Characteristic Strength of Concrete by Partial Replacement of Cement with Ceramic Waste Powder A Review pp. 47-53

Harikrishana Chaudhary and Rahul Kumar Satbhaiya

Comparative Structural Analysis of Intake Well Models Using Staad.Pro: Evaluating Displacements, Shear Forces, and Bending Moments pp. 54-68

Divyanshu Jhadane and Abhay Kumar Jha

Seismic Performance Evaluation and Design of Multi-Storey Buildings pp. 69-74

Vijay Kumar Pandit, Akshit Lamba and Indra Narayan Yadav

Exploring the Combined Influence of Industrial and Agricultural Waste on Concrete Performance pp. 75-81

Shashank Shekhar Kamal and Akshit Lamba

Techniques of Hybrid Annuity Mode Tender for Implementing Highway Projects pp. 82-92

Rishab Govil, Varinder Singh and Rajbala

Sustainable Construction Compliance Modeling Through ISO 14001, ISO 45001, and ISO 9001 Integrated Audit Data pp. 93-116

Tekaya Akinleye and Onuh Matthew Ijiga

Volume 9, issue 3, 2025

A Review of Comparative Analysis of Rectangular Water Tank with and Without Earth Pressure (Staad) pp. 01-09

Abhilash Sautkar, Pradeep Kumar Nirmal and Pratik Kathale

A Comparative Analysis of Rectangular Water Tank with and Without Earth Pressure (Staad) pp. 10-16

Abhilash Sautkar, Pradeep Kumar Nirmal and Pratik Kathale

Removal of Hydrocarbon from Produced Water by Phytoremediation Method, Using Water Hyacinth (Eichhornia Crassipes) pp. 17-25

Ehi Oria-Usifo, Isaac Enuma, Idonije Edward, David Okafor, Boluwade Segun, Uchenna Ukpai and Abraham Ajayi

A Review Paper on Influence of Optimized Process Parameter of Friction Stir Welding on Copper and Aluminium Alloy with Various Filler Materials pp. 26-32

Saurabh Agrawal and Abhijeet Ganguly

Influence of Optimized Process Parameter of Friction Stir Welding On Copper and Aluminium Alloy with Various Filler Materials pp. 33-43

Saurabh Agrawal and Abhijeet Ganguly

Design and Simulation of Earth Based Materials for Indoor Thermal Comfort in Mixed Mode Building Structure pp. 44-52

Mohit and Rajbala

Evaluating the Self Activating Concrete Structures Made Up With Nano and Micro Scale Ferromagnetic Materials pp. 53-60

Abhishek Boss and Rajbala

Development of Sustainable Light Weight Foamed Concrete Based On Construction and Demolition Debris pp. 61-69

Anil, Varinder Singh and Rajbala

An Architectural and Structural Review of Diagrid Structural Reinforcement in High Rise Construction pp. 70-84

Harvinder and Rajbala

Influence of Process Parameters in a Cold Chamber under High Pressure Die Casting pp. 85-94

Satendra Kumar Verma and Dinesh Dubey

A Review Paper on Influence of Process Parameters in a Cold Chamber under High Pressure Die Casting pp. 95-101

Satendra Kumar Verma and Dinesh Dubey

Volume 9, issue 2, 2025

Analysis of a Building Structure under Seismic Load Using Base Isolation Technique in Analysis Tool a Review pp. 01-06

Ashok Kumar Singh, Pradeep Kumar Nirmal and Anita Chaturvedi

Analysis of a Building Structure under Seismic Load Using Base Isolation Technique in Analysis Tool pp. 07-13

Ashok Kumar Singh, Pradeep Kumar Nirmal and Anita Chaturvedi

Analysis of A RCC Framed Structure with Shear Wall with And Without Bracing System Using Analysis Tool a Review pp. 14-20

Chuleshwar Prasad, K Divya and Pradeep Nirmal

Analysis of A RCC Framed Structure with Shear Wall with and Without Bracing System Using Analysis Tool pp. 21-28

Chuleshwar Prasad, K Divya and Pradeep Nirmal

A Review Paper of Comparative Analysis of a T Shaped Structure Considering Viscous Dampers with General Framed Structure under Seismic Load Using Analysis Tool pp. 29-35

Deepak Kumar, Pradeep Nirmal and Anita Chaturvedi

Comparative Analysis of a T Shaped Structure Considering Viscous Dampers with General Framed Structure under Seismic Load Using Analysis Tool pp. 36-43

Deepak Kumar, Pradeep Nirmal and Anita Chaturvedi

Dynamic Analysis of a RCC Building Frame considering Friction Damper Using Analysis Tool a Review pp. 44-50

Satish Baghel, Pradeep Nirmal and Anita Chaturvedi

Dynamic Analysis of an RCC Building Frame Considering Friction Damper Using Analysis Tool pp. 51-58

Satish Baghel, Pradeep Nirmal and Anita Chaturvedi

Analysis of a Building Frame Considering Flood Resistance Technology Using Analysis Tool pp. 59-67

Varsha Sahu, Anita Chaturvedi and Pradeep Nirmal

Analysis of A Building Frame Considering Flood Resistance Technology Using Analysis Tool A Review pp. 68-73

Varsha Sahu, Anita Chaturvedi and Pradeep Nirmal

Comparison of Different Types of Concrete Slabs under Dynamic Loading pp. 74-89

Lubna Mohammed Abd

Analytical Study on Seismic Behaviour of Steel Plate Shear Wall with Different Steel Content and Axial Stress Ratio pp. 90-97

Lokesh and Ajay Swaroop

Analysis of a Circular Water Tank Considering Lateral Load Using Analysis Tool a Review pp. 98-109

Kusum, Pradeep Nirmal and Pratik Kathale

Analysis of a Circular Water Tank Considering Lateral Load Using Analysis Tool pp. 110-116

Kusum, Pradeep Nirmal and Pratik Kathale

Review on Seismic Behavior of L-Shaped Multistorey Buildings with Varying Bay Lengths: A Literature Perspective pp. 117-124

Roshan Kumar Sahu and Tarun Kumar Rajak

Seismic Performance Analysis of L-Shaped Multi-Storey Structures with Varying Bay Lengths Using STAAD.Pro pp. 125-131

Roshan Kumar Sahu and Tarun Kumar Rajak

Prestressed Voided Slab of Bridge Analysis Using CSI Bridge Analysis Tool a Review pp. 132-140

Sabir Khan and Tarun Kumar Rajak

Prestressed Voided Slab of Bridge Analysis Using CSI Bridge Analysis Tool pp. 141-155

Sabir Khan and Tarun Kumar Rajak

Comparison and Design of Multi-Storied Buildings in All Four Zones, By Using STAAD Pro, A Review pp. 156-160

Pushkar Lal Sahu and Bhojram Sahu

Comparison and Design of Multi-Storied Buildings in All Four Zones, By Using STAAD Pro pp. 161-166

Pushkar Lal Sahu and Bhojram Sahu

Influence of Optimized Process Parameter of Friction STIR Welding On Copper and Aluminium Alloy with Various Filler Materials pp. 167-177

Saurabh Agrawal, Vikas Gadpale and Abhijeet Ganguly

A Review Paper on Influence of Optimized Process Parameter of Friction Stir Welding On Copper and Aluminum Alloy with Various Filler Materials pp. 178-184

Saurabh Agrawal, Vikas Gadpale and Abhijeet Ganguly

Seismic Analysis of Flat Slab Structure Using ETABS Software: A Review pp. 185-196

Deepak, Vijay Kumar Tembhre and Raviraj Singh Gabbi

Seismic Analysis of Flat Slab Structure Using ETABS Software pp. 197-214

Deepak, Vijay Kumar Tembhre, Jitendra Sihore and Harish Kumar Verma

Analysis of a RCC Stadium Structure Under Seismic Load Using Staad.Pro A Review pp. 215-221

Vedlina Baghel, K Divya and Pradeep Nirmal

Analysis of a RCC Stadium Structure Under Seismic Load Using Staad.Pro pp. 222-229

Vedlina Baghel, K Divya and Pradeep Nirmal

Analysis of a Cable Stayed Suspension Hybrid Bridge Considering Vehicular Loading Using CSI Bridge: A Review pp. 230-236

Arvind Dongre, Vijay Kumar Tembhre, Jitendra Sihore and Harish Ku Verma

Analysis of a Cable Stayed Suspension Hybrid Bridge Considering Vehicular Loading Using CSI Bridge pp. 237-245

Arvind Dongre, Vijay Kumar Tembhre and Raviraj Singh Gabbi

Volume 9, issue 1, 2025

Geochemical and Mineralogical Characteristics of Deep Porphyry Systems: Implications for Exploration Using ASTER pp. 01-21

Michael Owenvbiugie Eguagie, Idoko Peter Idoko, Onuh Matthew Ijiga, Lawrence Anebi Enyejo, Francisca Chinonye Okafor and Chinelo Nwaamaka Onwusi

Analysis of an Existing Box Culvert Structure with or Without Retrofiting Using Analysis Tool pp. 22-27

Akshay Joshi and Rahul Kumar Satbhaiya

Analysis of an Existing Box Culvert Structure with or without Retrofiting Using Analysis Tool a Review pp. 28-34

Akshay Joshi and Rahul Kumar Satbhaiya

Analysis of a Stadium Structure under Dynamic Loading Using Analysis Tool a Review pp. 35-42

Sunil Kumar Yadav and Rahul Kumar Satbhaiya

Analysis of a Stadium Structure under Dynamic Loading Using Analysis Tool pp. 43-48

Sunil Kumar Yadav and Rahul Kumar Satbhaiya

Analysis of an Elevated INTZ Water Tank under Different Wind Speed Using Analysis Tool pp. 49-56

Ujjwal Bisen and Rahul Kumar Satbhaiya

Analysis of an Elevated INTZ Water Tank under Different Wind Speed Using Analysis Tool a Review pp. 57-65

Ujjwal Bisen and Rahul Kumar Satbhaiya

Seismic Analysis of Tall Building with Varying Shear Wall Positions Using Linear Static Approach: A Review pp. 66-70

Mahendra Patel and Dharmendra Prajapati

Seismic Analysis of Tall Building with Varying Shear Wall Positions Using Linear Static Approach pp. 71-76

Mahendra Patel and Dharmendra Prajapati

Experimental Study on Fresh and Hardened Properties of Concrete with Fine Aggregate Replacement by Manufactured Sand a Review pp. 77-82

Pooja Raj and Dharmendra Prajapati

Experimental Study on Fresh and Hardened Properties of Concrete with Fine Aggregate Replacement by Manufactured Sand pp. 83-88

Pooja Raj and Dharmendra Prajapati

A Review Paper on Static and Dynamic Analysis Using Staad Pro pp. 89-94

Aman Pandey, Anita Chaturvedi and Pradeep Kumar Nirmal

Static and Dynamic Analysis Using Staad Pro pp. 95-103

Aman Pandey, Anita Chaturvedi and Pradeep Kumar Nirmal

Sesismic Analysis of Hospital Building pp. 104-110

Prakash Tiwari, Anita Chaturvedi and Pradeep Kumar Nirmal

A Review Paper on Sesismic Analysis of Hospital Building pp. 111-117

Prakash Tiwari, Anita Chaturvedi and Pradeep Kumar Nirmal

Sustainable Structural Design for Multi-Storied Buildings: A Green Engineering Approach pp. 118-127

R. Sathishkumar and D. Balaji

Bio-Based Concrete Enhancement for Sustainable Construction pp. 128-135

Venkata Siddhartha Raju Vegesna and D. Balaji

Conceptual Environmental Safety Compliance Framework for Construction and Infrastructure Projects pp. 136-163

Stephen Francis Obogo, Cynthia Obianuju Ozobu and Mike Ikemefuna Nwafor

Review of Sustainable Environmental Practices in Occupational Safety Management Systems pp. 164-196

Stephen Francis Obogo, Oluwakemi Moturayo Arumosoye and Oghenepawon David Obriki