Int J Sci Res Civil Engg

2016 - 2026

From International Journal of Scientific Research in Civil Engineering
Bibliographic data for series maintained by Pankaj Sharma ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 5, issue 6, 2021

Dynamic Analysis of RCC Frame Structure Subjected to Blast Loading pp. 01-04

Mukesh Kumar, Vinay Kumar Singh Chandrakar and Parbeen Bano

Utilization of Waste Plastic In Concrete - A Review pp. 05-11

Nishant Kumar and Ajay Swarup

Experimental Analysis on The EFECT Of Partial Replacement of Cement By Waste Bio Product of Bauxite Residue: A Review pp. 12-21

Mohammed Rizwan Raza and Ajay Swarup

Analysis of Circular Elevatd Water Tank with Slant Columns Considering Hydrostatic Load pp. 22-27

Ritu Parashar and Rahul Sathbhaiya

Analysis of a Cement Storage bin Considering Lateral Forces using Staad.pro pp. 28-33

Antim Jatav and Rahul Sathbhaiya

Analysis of An Inclined Structure Considering Suspension Cables Using Staad.Pro pp. 34-41

Aradhana Gohe and Afzal Khan

Analysis of a High-Rise Building Frame Considering Wind Pressure Considering Steel RCC composite structure using ETABS pp. 42-47

Mukesh Kumar Chaudhary and Afzal Khan

A Review: Analysis of an Inclined Structure Considering Suspension Cables Using STAAD.PRO pp. 48-52

Aradhana Gohe and Afzal Khan

Analysis of a High-Rise Building Frame Considering Wind Pressure Considering Steel RCC composite structure using ETABS pp. 53-61

Mukesh Kumar Chaudhary and Afzal Khan

Effect of Silica Fume on Concrete pp. 62-69

Abhishek Kumar, K. Divya Kotecha and Lokesh Singh

Experimental Studies on Crumbed Rubber as fine aggregate in Structural Concrete pp. 70-77

Arivalagan S

Utilization of Waste Material in Construction Industry: A Review pp. 78-90

Swity Ahirwar and Ravindra Kumar Raj

Design and Analysis of A Pre-Engineered Warehouse Building Considering Lateral Load Using ETABS A Review pp. 91-99

Anuj Kumar, Afzal Khan and Vikas Patidar

Analysis of a Cement Storage bin Considering Lateral Forces using Staad.pro A Review pp. 100-104

Shivam Nograiya and Rakesh Patel

Design and Analysis of a Pre-Engineered Warehouse Building Considering Lateral Load Using Etabs pp. 105-110

Anuj Kumar, Afzal Khan and Vikas Patidar

Utilization of Waste Material in Construction Industry pp. 111-125

Swity Ahirwar and Ravindra Kumar Raj

Experimental Investigation on The Buckling Behavior of CFRP Confined Hollow Steel Column Filled with Prosopis Juliflora Wood – A Review pp. 126-138

Valli. D, S. Arivalagan and M. Narmatha

Seismic Analysis of A Tall Structure Considering Diagrid And Tuned Dampers Using ETABS A Review pp. 139-148

Abhra Tandon and Praveen Singhai

Analysis of A 3-Dimensional Building Frame Considering Outrigger and Hexagrid Technology Using ETABS A Review pp. 149-157

Neetu Katre and Abhay Kumar Jha

Analysis of a Tall Structure Considering Shear Wall with Dampers and Bracings Considering Lateral Load Using ETABS pp. 158-166

Shubham Soni and Rahul Satbhaiya

Analysis of a Segmental Bridge Considering Lateral Forces Using Analysis Tool pp. 167-180

Vijay Singh Rathore and Rahul Satbhaiya

Volume 5, issue 5, 2021

Health Monitoring of an Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad pp. 01-08

Abhishek Sharma, Pradeep Kumar Nirmal and Lokesh Singh

Analysis and Design of a Cooling Tower Considering Wind Pressure and Thermal Effect Using Staad.Pro pp. 09-19

Vinay Kumar Sinha, Pradeep Kumar Nirmal and Lokesh Singh

Health Monitoring of An Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad: A Review pp. 20-25

Abhishek Sharma, Pradeep Kumar Nirmal and Lokesh Singh

Analysis and Design of a Cooling Tower Considering Wind Pressure and Thermal Effect Using Staad.Pro A Review pp. 26-34

Vinay Kumar Sinha, Pradeep Kumar Nirmal and Lokesh Singh

Tracking and Scheduling of a Building Project Using Management Tool: A Review pp. 35-39

Ajay Chanderiya and Vinay Kumar Singh Chandrakar

Performance and Optimization of PT Slab Using Dynamic Load Condition of Larger Span Structure: A Review pp. 35-39

Kuljinder Singh Munday and Vinay Singh Chandraker

Utilization of Social Technique For Quality Control In Building Construction: A Review pp. 40-48

Deepak Premchand Shah and Dipali Jaiswal

Experimental Investigation of Concrete Utilizing Plastic Waste HDPE and LDPE as a Replacement of Aggregate in Concrete A Review pp. 57-63

Prakash Noriya and Pankaj Dwivedi

Risk Analysis of a Construction Project Considering Seismic Hazards using Primavera A Review pp. 64-68

Shivam Mishra and M.P. Verma

Utilization of Management Tool In Monitoring of a Metro Project Considering Live Details: A Review pp. 69-76

Suneet Kumar Dehariya and M. P. Verma

Utilization of Management Tool In Monitoring of a Metro Project Considering Live Details: A Review pp. 77-83

Vaibhav Mishra and Afzal Khan

Tracking and Scheduling of a Building Project using Management Tool A Review pp. 84-88

Vaibhav Mishra and Afzal Khan

Seismic Analysis of a Post Tensioned Slab as Per Indian Design Code Using Etabs pp. 89-97

Akhalesh Kumar Patel and Rahul Satbhaiya

Analysis of An Inclined Structure Considering Suspension Cables Using Staad.Pro pp. 98-105

Rama Devi Kurmi and Rahul Satbhaiya

Analysis of A Structure Considering Horizontal Setbacks Under Lateral Loading Using Etabs pp. 106-115

Prince Kumar Suryavanshi and Rahul Satbhaiya

Comparative Analysis of Cable Stayed Bridge and Girder Bridge Considering Seismic Forces and I.R.C. Loading Using SAP2000: A Review pp. 116-122

Gaurav Rawat and Ravindra Kumar Raj

Comparative Studies of Steel, Bamboo and Glass Fiber as Reinforcing Bars in Concrete Tensile and Flexural Characteristics pp. 123-126

Sukant Sahu and Ravindra Kumar Raj

Comparative Studies of Steel, Bamboo and Glass Fiber as Reinforcing Bars in Concrete Tensile and Flexural Characteristics A Review pp. 125-129

Sukant Sahu and Ravindra Kumar Raj

Comparative Studies of Steel, Bamboo and Glass Fiber as Reinforcing Bars in Concrete Tensile and Flexural Characteristics pp. 127-124

Gaurav Rawat and Ravindra Kumar Raj

Health Monitoring of An Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad: A Review pp. 130-135

Sourabh Sahu and Ravindra Kumar Raj

Health Monitoring of An Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad pp. 136-143

Sourabh Sahu and Ravindra Kumar Raj

Enhance the Quality of the Management System for BOT road Transport Investment Project in Viet Nam pp. 144-155

Dang Hoang Tuan, Le Manh Tuong, Dinh Dang Quang, Le Hoai Linh and Le Phi Vu

Assessment on Vietnam's Transport Infrastructure Development Investment under the mode of Public-Private Partnership - Proposing Solutions pp. 156-163

Le Manh Tuong, Le Hoai Linh, Dang Hoang Tuan and Le Phi Vu

Volume 5, issue 4, 2021

Completion of the design survey and preparation of cost estimates for traffic works by the Project Management Unit No.7 under Ministry of Transport, Viet Nam pp. 01-11

Tuan Anh Nguyen and Hai Truong Trinh

Finalization of transportation construction contract management at Project Management Unit No.7 under Ministry of Transport, Viet Nam pp. 12-22

Tuan Anh Nguyen and Nam Ha Nguyen

Analysis of a Commercial Structure Utilizing Analysis Tool Staad.Pro pp. 23-29

Vijay Singh Dasoondi and Rahul Satbhaiya

Comparative Analysis Of Cable Stayed Bridge And Girder Bridge Considering Seismic Forces and I.R.C. Loading Using Sap2000: A Review pp. 30-36

Dilip Kumar Padhy, Rakesh Patel and Deepak Bandewar

Comparative Analysis of Cable Stayed Bridge and Girder Bridge Considering Seismic Forces and I.R.C. Loading Using Sap2000 pp. 37-46

Dilip Kumar Padhy, Rakesh Patel and Deepak Bandewar

Analysis of a Mid Rise Structure Considering Floating Column with different Arrangements of Beams below using Staad.Pro: A Review pp. 47-52

Awaneesh Nema and Vedant Shrivastava

Analysis of a Substructure Part of Metro Structure as Per Live Data Using Analysis Tool: A Review pp. 53-61

Raushan Kumar and Rahul Satbhaiya

Analysis of a Substructure Part of Metro Structure as Per Live Data Using Analysis Tool pp. 62-75

Raushan Kumar and Rahul Satbhaiya

Review of Contractor Safety Compliance Systems in Infrastructure Engineering Projects pp. 76-100

Stephen Francis Obogo, Daniel Obokhai Uduokhai and Cynthia Obianuju Ozobu

Volume 5, issue 3, 2021

Utilization of Project Management tool in Construction Industry: A Review pp. 01-05

Ishan Singh, Sandeep Gupta and Surbhi Awasthi

Management and Scheduling of a Live Bridge Project in Bhopal Using Project Management Software pp. 06-16

Ishan Singh, Sandeep Gupta and Surbhi Awasthi

Study On Calculated Methods of Slope Stability In Climate Change pp. 17-28

Nguyen Hoang Khuyen and Le Manh Tuong

Risk Management of Transportation Projects of Tien Giang Province In Climate Change Conditions pp. 29-37

Le Phi Vu, Le Manh Tuong and Le Van Thuc

Study on Interfacial Shear Properties of Concrete Reinforced Stone Arch Bridges Using Staad.pro A Review pp. 38-45

Tirangini Hanwate, Sandeep Gupta and Supriya Jain

Study on Interfacial Shear Properties of Concrete Reinforced Stone Arch Bridges Using Staad.pro pp. 46-50

Tirangini Hanwate, Sandeep Gupta and Supriya Jain

Analysis of Circular Elevatd Water Tank with Slant Columns Considering Hydrostatic Load pp. 56-61

Prakash Chandra Sharma and Vinay Singh Chandrakar

Analysis of Circular Elevatd Water Tank with Slant Columns Considering Hydrostatic Load - A Review pp. 62-69

Prakash Chandra Sharma and Vinay Singh Chandrakar

Design and Analysis of Multistorey (G+14) Residential Building Using Staad.Pro & Autocad pp. 70-82

Sowrav Saha, Mohamed Nur Ali, Wyman K. Chisanga and Abdikarim Yasin

Analysis of Differently Shaped Footing for A Midrise Structure Considering Lateral Forces Using SAFE Software pp. 83-91

Vijay Singh Dasoondi and Rahul Sathbhaiya

Analysis of Differently Shaped Footing for A Midrise Structure Considering Lateral Forces Using SAFE Software: A Review pp. 92-100

Vijay Singh Dasoondi and Rahul Sathbhaiya

Review on the Role of Geographic Information System and Remote Sensing for Watershed Management pp. 101-111

Barena Adare

Performance and Optimization of PT Slab Using Dynamic Load Condition of Larger Span Structure pp. 112-121

Krishna Kumar, Pradeep Kumar Nirmal and Lokesh Sigh

Performance and Optimization of PT Slab Using Dynamic Load Condition of Larger Span Structure: A Review pp. 122-129

Krishna Kumar, Pradeep Kumar Nirmal and Lokesh Sigh

Analysis of a Mid Rise Structure Considering Floating Column with Different Arrangements of Beams below using staad.pro pp. 130-137

Awaneesh Nema and Vedant Shrivastava

Analysis of A 3-Dimensional Structure with F.E.M. and P-Delta Method Considering Lateral Forces Using Etabs pp. 138-143

Aditya Pratap Singh Bais, Rakesh Patel and Deepak Bandewar

Monitoring & Scheduling of A Metro Project (Bhopal) Work Using Project Management Tool Primavera P6 pp. 144-150

Amit Namdeo and Ravindra Kumar Raj

Utilization Of Bamboo Fibre and M-Sand in Concrete as A Replacement of Natural Sand pp. 151-161

Varsha Rohit and Ravindra Kumar Raj

Monitoring & Scheduling of a Metro Project (Bhopal) Work Using Project Management Tool Primavera P6: A Review pp. 162-169

Amit Namdeo and Ravindra Kumar Raj

Utilization of Bamboo Fibre and M-Sand in Concrete as A Replacement of Natural Sand - A Review pp. 170-177

Varsha Rohit and Ravindra Kumar Raj

Volume 5, issue 2, 2021

Analysis of an Irregular Structure Considering Bracing and Dampers Using Analysis Tool pp. 01-08

Siddharth Singhai, Rachna Bajaj and Kapil Soni

Study on Tunnel Face Failure Mechanism in Two-Layer Soils pp. 09-16

Tuan Anh Nguyen and Minh Anh Trong Nguyen

Effect of Die Geometry on Fatigue Analysis of Aluminium Alloy (ADC12 Aluminium A383) using Pressure Die Casting Process pp. 17-26

Poshan Dewangan, Ved Prakash Dewangan, Sushil Kumar Maurya and Lokesh Singh

Effect of Die Geometry on Thermal Fatigue Analysis of Aluminium Alloy (A02240) Using Pressure Die Casting Process pp. 27-36

Poshan Dewangan, Ved Prakash Dewangan, Sushil Kumar Maurya and Lokesh Singh

Seismic analysis of a Building Frame Considering Lateral Load Resisting Elements: A Review pp. 37-44

Sarfaraz Alam, Raviraj Singh Gabbi and Vijay Tembhre

Comparative Analysis of a Building Frame Under Dynamic Loading Considering Post Tensioning Members at the Edges Using Staad.Pro pp. 45-52

Sarfaraz Alam, Raviraj Singh Gabbi and Vijay Tembhre

Analysis of Self Supported Steel Chimney with The Effect Due to Flue Dust Opening and Geometrical Parameter pp. 53-59

Sahil Khan and Deepak Bandewar

A Review on Analysis of Self Supported Steel Chimney with The Effect Due to Flue Dust Opening and Geometrical Parameter pp. 60-64

Sahil Khan and Deepak Bandewar

Experimental Investigation of Reinforced Concrete Considering Fibers as A Replacement of Reinforcement pp. 65-70

Ashish Patidar, M. P. Verma and Vinay Singh Chandraker

Farmers Perception towards the extent of Land Degradation in the case of Essera Woreda, Dawuro Zone Southwest Ethiopia pp. 71-78

Barena Adare

Assessing the impact of stone quarrying on the landscape, crop and grazing land degradation in Loma Bosa district, Dawuro zone, southern Ethiopia pp. 79-91

Damte Balcha and Semayat Oyda

Seismic and Wind Analysis of Natural Draught Cooling Tower with Change in Dimensional Ratio pp. 92-103

Mohd Atif Hussain and Rashmi Sakalle

A Review of Geomechanical Risk Management in Well Planning: Global Practices and Lessons from the Niger Delta pp. 104-118

Joshua Emeka Ozor, Oludayo Sofoluwe and Dazok Donald Jambol

A Market Penetration Strategy Framework for New Pharmaceutical Products in Highly Regulated African Healthcare Markets pp. 119-133

Michael Aduojo Amuta, Muridzo Muonde, Ashiata Yetunde Mustapha and Akachukwu Obianuju Mbata

Volume 5, issue 1, 2021

Review on Effect of Integrated Soil and Water Conservation Measures on Soil Productivity, Soil Quality, Water Quality and Sustanable Soil Management Practice in Ethiopia pp. 01-14

Damte Balcha Gadana and Bekele Tona Amenew

Formulation of Modified Dense Graded Bituminous Macadam with Low Density and High-Density Polythene Waste with Zycotherm Admixture pp. 15-22

Avinash Kumar and Ajeet Saxena

Seismic Analysis of a Structural Frame Considering Joint Analysis of Beam – Column with Conventional and Pre –Tensioning Slab Using Analysis Tool STAAD.PRO pp. 23-32

Rahul Singh Parihar and Mayank Gupta

Experimental Investigation of a Self-Healing Concrete Considering Bacillus Megaterium Bacteri and Fibers pp. 33-38

Randhir Kumar Singh and Ajeet Saxena

Formulation of Modified Dense Graded Bituminous Macadam with Low Density and High-Density Polythene Waste with Zycotherm Admixture: A Review pp. 39-48

Avinash Kumar and Ajeet Saxena

Experimental Investigation of a Self-Healing Concrete Considering Bacillus Megaterium Bacteri and Fibers: A Review pp. 49-57

Randhir Kumar Singh and Ajeet Saxena

Utilization of Ferroconcrete and Steel Timber Hybridization Technique in Tall Structure using Analysis tool Etabs: A Review pp. 58-68

Rahul Rathore and Lavina Talawale

Utilization of Ferroconcrete and Steel Timber Hybridization Technique in Tall Structure using Analysis tool Etabs pp. 69-77

Rahul Rathore and Lavina Talawale

Dynamic Analysis of Irregular Building under Lateral Load with Combination of shear wall with Friction Dampers and Bracings: A Review pp. 78-86

Riyazul Haque, Deepak Bandewar and Rakesh Patel

Dynamic Analysis of Irregular Building under Lateral Load with Combination of shear wall with Friction Dampers and Bracings pp. 87-98

Riyazul Haque, Deepak Bandewar and Rakesh Patel

Effect of Enset(Enset Venitercusem) Based Land Use on Soil Properties in Southern Ethiopia: A Review pp. 98-113

Damte Balcha Gadana